Bush 10 Inch Portable In - Car DVD Player - Black User guide

Instruction manual

CDVD9SW

You’ll soon be enjoying your new Portable DVD Player.

It all begins here, with your instructions. Don’t worry,
there’s nothing too technical coming up. Just simple,
step-by-step guidance to get you up and running
quickly. Sound good? Then let’s get started.

Help and Guidance

We’re here to help you get the most from your Portable DVD Player. Should you require
any guidance, a simple solution can often be found online at:

www.argos-support.co.uk

If you still require further assistance, call one of our experts on 0345 604 0105.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

Contents

Safety information

1

Safety information 6

Getting to know your Portable

2

DVD Player

Ready? Let’s begin 10

Accessories 10

Front & side panel 11

Remote control 13

Installing the remote batteries 14

Battery disposal advice 14

Powering with mains power 14

Powering with the in-car power adaptor 14

Adjusting the swivel display 14

TV connection 15

Connecting an external source 15

Using your Portable DVD Player

3

Charging the internal battery 18

Getting started 18

Volume controls 18

Stopping a DVD/CD 18

Pause DVD/CD 18

Skip chapter (DVD) or track (CD) 18

Search forward or backward 18

Display (DVD/CD) 19

Menu (DVD) 19

Title (DVD) 19

Numeric keypad (DVD/CD) 19

Repeat (DVD/CD) 19

Using your Portable DVD Player

3

Multi-angle (DVD) 19

Mute (DVD, CD) 19

Audio tracks (DVD) 20

Subtitles (DVD) 20

Zoom (DVD, Picture disc) 20

USB/DVD 20

JPG picture viewer 20

Program playback 21

Earphone usage 21

Setup menu

General 22

Audio (speaker setup) 22

Video > Quality 22

Preferences 23

Other information

4

Technical specification 26

Care & maintenance 26

Product support

5

Troubleshooting 28

Help and assistance 29

Disposal 30

Guarantee 31

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

3

This page is left intentionally blank

1Safety information

Safety information

Important - Please read these instructions fully before

installing or operating

Power source

• This symbol means that this unit is double
insulated. An earth connection is not
required.

• The appliance must be connected to
a 100-240 volt 50/60Hz AC supply by
means of a three pin socket.

• Unplug this apparatus during lightning
storms or when unused for long periods of
time - to prevent damage to this product.

• Opening or removing covers may expose
you to dangerous voltages or other
hazards.

• To prevent risk of fire or electric shock,
avoid overloading wall outlets, extension
cords, or integral convenience receptacles.

• Use suitable power sources - Plug the
product into a suitable power source, as
described in the operating instructions or
as marked on the product.

• The supply voltage should be the
same as that indicated in the technical
specifications and the appliance rating
plate.

• If the socket outlets in your home are not
suitable for the plug supplied with this
unit check with a qualified electrician for
replacement.

• In order to disconnect the apparatus from
the mains completely, switch off the outlet
and remove the mains plug completely.

• Do not bend, stretch or pull the supply
cable in order to avoid electric shock.

• When installed, the power socket must be
within easy reach.

• Do not install the unit in a confined space.
Allow adequate ventilation to prevent heat
build-up.

• For indoor use only.

Heat build up

• During use the unit will heat up, this is not a
malfunction. If the unit is used continuously at
high volume levels, the unit temperature will
rise considerably. Do not touch the unit to avoid
potential burns..

Moisture and water

• Do not use this apparatus near water or moisture.

• Do not use this product near a bathtub, washbowl,
kitchen sink, and laundry tub, in a wet basement,
near a swimming pool, or anywhere else that water
or moisture is present.

Heat sources and flames

• Batteries shall not be exposed to excessive
heat such as sun, fire or the like

• To prevent risk of fire or electric shock,
avoid overloading wall outlets, extension
cords, or integral convenience receptacles.

Servicing and repairs

• Refer all servicing to qualified service personnel

• Servicing is required when the apparatus has been
damaged in any way: such as liquid has been
spilled or objects have fallen into the apparatus; the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

Safety information6

Safety information

Important - Please read these instructions fully before

installing or operating

Laser warnings

• This product utilizes a Class 1 laser.

• This laser CD Player is equipped with safety
switches to avoid exposure when the
door is open and the safety interlocks are
defeated. Invisible laser radiation is present
when the CD Player’s drawer is open and
the system’s interlock has failed or been
defeated. It is very important that you avoid
direct exposure to the laser beam at all
times. Please do not attempt to defeat or
bypass the safety switches.

• This unit employs a laser, only qualified
service personnel should attempt repair.

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

Safety information 7

This page is left intentionally blank

Getting to know your

Portable DVD Player

2

Getting to know your Portable DVD Player

You’ll be up and running in no time

Ready? Let’s begin...

Please read these instructions carefully. They contain
important information which will help you get the best
from your Portable DVD Player and ensure safe and
correct installation and operation.

If you require any further assistance, our technical
experts are happy to help. For full details, refer to
the product support section at the end of these
instructions.

Accessories

1. CDVD9SW Portable DVD Player

2. Remote control

3. 2 x AAA batteries

4. Mains charger

5. In-car charger

6. AV cable

7. Earphones

8. Instruction manual

Portable DVD Player

In-car charger

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

10

Remote control 2 x AAA batteries Mains charger

AV Cable Earphones

Getting to know your Portable DVD Player

Getting to know your Portable DVD Player

1

1

1

You’ll be up and running in no time

1

2

3

4

5

6

7

8

1. LCD DISPLAY

2. SPEAKERS

3. OK button: Press to select options.

4. VOLUME+ button: Increase volume level

PLAY/PAUSE button: Press to begin playback

5.

or pause playback.

6. VOLUME- button: Decrease volume level.

SEARCH button: Press to search backwards.

7.

DISC COMPARTMENT EJECT button

8.

9. DISPLAY SWIVEL

10. SOURCE button: Press to switch input source.

9

10

11

12

13

14

15

16

17

18

19

11. SETUP button: Press for setup menu

12. MENU button: Press for DVD menu.

SKIP button: Press to skip previous chapters.

13.

SEARCH button: Press to search forwards.

14.

SKIP button: Press to skip next chapters.

15.

STOP button: Press to stop playback

16.

17. AUDIO button: Press to switch audio tracks.

18. DVD/USB button: Press to switch between DVD &

USB inputs.

19. IR SENSOR/STATUS LEDS: Remote control sensor

& status LED lights.

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

Getting to know your Portable DVD Player

11

Getting to know your Portable DVD Player

You’ll be up and running in no time

20

USB

20. USB port: Insert USB flash drive for photo

playback.

21. HEADPHONE output socket: Connect

headphones for private use. Insert a 3.5mm jack.

22. AV OUT socket: Connect an external viewing

source such as a TV.

21

PHONE

23

22

AV OUT AV IN OFF/ON

24

25

DC:12V

23. AV IN socket: Connect an external video source

such as a full size Portable DVD Player.

24. ON/OFF switch: Power the Portable DVD Player

on or off.

25. DC INPUT POWER socket: Connect the mains

charger supplied with the Portable DVD Player.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

12

Getting to know your Portable DVD Player

Getting to know your Portable DVD Player

You’ll be up and running in no time

Angle: Press to cycle between the
camera angles present on the disc

TFT: Press to disable the built-in

TFT screen. Press again to enable.

Mute: Press to mute audio output

USB/DVD : Press to switch inputs

from DVD to USB

Power: Standby mode ON/ OFF
button

Setup: Press to enter the player

setup options

Display: Press to display

information relating to the disc

Menu : Jump to the DVD menu

OK: Press to select an option

Zoom: Press to cycle between the

zoom presets

Numeric button: Used for entering

values into various functions

/ : Skip to the previous or

next track/chapter

: Press to stop playback

Audio: Press to cycle the audio

tracks on the disc

Subtitle: Press to cycle between
subtitle tracks

Title: Press to display the DVD Title
menu (if available)

Navigation buttons : Press
navigate menus

Volume+/- : Adjust the volume

Repeat : Enables the repeat mode

Prog. : Enter the program playback

setting

: Press begin or pause playback

/ : Search backwards/

forwards through the DVD/CD

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

Getting to know your Portable DVD Player

13

Getting to know your Portable DVD Player

Getting to know your Portable DVD Player

You’ll be up and running in no time

You’ll be up and running in no time

Installing the remote batteries

123

1. Remove the battery cover (as shown).

2. Insert 2 x AAA batteries, taking note that the

polarities match up with the engraved diagrams
inside the battery compartment.

3. Replace the battery cover.

Battery disposal advice

• Dispose of used batteries with regard to the
recycling regulations in your area.

• Do NOT short circuit batteries or throw them into
water, the general rubbish or in a fire. Weak batteries
can leak and damage the remote control. Replace
them in good time!

Powering with mains power

USB

PHONE

AV OUT AV IN OFF/ON

DC:12V

Powering with the in-car power
adaptor

If the unit requires charging or powering during vehicle
travel you can use the supplied car power adapter.

WARNING

12V ONLY

USB

1. Ensure the POWER ON/OFF switch (24) is set to

the OFF position.

2. Insert the small jack end of the car power adapter

into the DC input socket (25) on the side of the
DVD player.

3. Insert the other end into a 12V car power adapter

socket.

It is VERY important not to connect to a 24V
car power adapter. Please check your vehicle
manual before attempting.

4. Set the POWER ON/OFF switch (24) to the ON

position to use the portable DVD player or follow
the charging instructions on page 18.

PHONE

AV OUT AV IN OFF/ON

DC:12V

Adjusting the swivel display

The display can be rotated a total of 270 degrees.

1. The display can be rotated 90 degrees

Anti-clockwise from the facing front position.

2. The display can be rotated 180 degrees Clockwise

from the facing front position.

1. Insert the Mains adaptor jack into the DC INPUT

socket (25) on the side of the portable DVD player.

2. Connect the mains adaptor plug to a wall outlet

and power on.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

14

Getting to know your Portable DVD Player

Take care not to rotate any further than the specified
angles, as internal wiring can be damaged.

Getting to know your Portable DVD Player

You’ll be up and running in no time

TV connection

USB

NOTE: before attempting to connect this unit to a
TV, ensure that the portable DVD player and TV are
both switched off.

1. Insert the 3.5mm end of the supplied AV cable into

the AV OUTPUT socket (22) on the side of the
unit.

2. The other ends of the cable contain red & white

sockets which carry audio. They can be connected
to either the TV inputs or an external amplifier.

Take note to match the colours when connecting.

3. The yellow cable is the video cable and must be

connected to the yellow video input on your TV.

4. After tuning your TV to the correct input the

playing content of the portable DVD player will
appear on the TV screen. To disable the output on
the TFT screen of portable DVD player press the
TFT ON/OFF button on the remote control.

PHONE

AV OUT AV IN OFF/ON

DC:12V

Connecting an external source

PHONE

AUDIO OUT

VIDEO OUT

AV OUT AV IN OFF/ON

DC:12V

VIDEO SOURCE

USB

You can connect an external source to the portable
DVD player to allow playback on the integrated display.

1. Insert the 3.5mm end of the supplied AV cable into

the AV INPUT socket (23) on the side of the unit.

2. Insert the other ends of the AV cable into your

VIDEO SOURCE outputs.

3. After making the connections you must press the

SOURCE button on the rportable DVD player (10)
to switch to the ‘AV IN’ mode.

4. Should you need to switch back to the internal

DVD player, press the SOURCE button on the
remote or main unit (10) again.

If your video source only has a SCART output, you
can purchase a SCART adaptor; and connect the
three coloured jacks to the same coloured sockets
on the adaptor.

Then connect the adaptor to your video source.

Press the TFT ON/OFF button once more to enable
once more.

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

Getting to know your Portable DVD Player

15

This page is left intentionally blank

Using your Portable

DVD Player

3

Using your Portable DVD Player

Let’s get started

Charging the internal battery

USB

PHONE

AV OUT AV IN OFF/ON

DC:12V

Before using the battery, please make sure it is fully
charged.

1. Insert the Mains adaptor jack into the DC INPUT

socket (25) on the side of the portable DVD player.

2. Connect the mains adaptor plug to a wall outlet

and power on.

3. Slide the power switch (24) (to the OFF position.

When the battery is fully charged the red LED
charging indicator will change to the green LED.

Approx 5 hours charge, and 2 hours usage

If the unit is not in use for a prolonged period of
time, it is recommended to charge the built-in
battery every three months.

Getting started

1. Slide the POWER switch (24) to the ON position

(the blue power LED will light up).

2. Press the disc compartment eject button (8) to

open the disc tray.

3. Place a DVD disc onto the disc tray (label facing

upwards).

4. Close the disc tray and the playback starts

automatically.

5. When a menu screen appears on the screen,

use the navigation buttons to select the menu
option you require, then press the OK button (3, or
remote) to start playback.

Auto standby mode

In order to save battery power, when not in use the
player will enter standby mode after 20 minutes.

To wake the player from standby mode press the
STANDBY button on the remote control or set the
players POWER switch to the OFF then ON position.

Volume controls

1. Use the VOLUME - / + buttons (6, 4) on either

the portable DVD player or remote to increase or
decrease the listening level.

2. Use the MUTE button on the remote to silence the

audio, press again to resume.

Stopping a DVD/CD

1. Pressing the STOP button once during playback

will stop play at the current position.

2. Pressing the

will resume playback from the position you
stopped playback from.

3. If you press the

cease and the resume option will not be available.

PLAY/PAUSE button at this point

STOP button twice, playback will

Play/Pause DVD/CD

1. If you need to pause the playback at any time,

press the

2. To resume playback press the

button again.

PLAY/PAUSE button.

PLAY/PAUSE

Skip chapter (DVD) or track (CD)

1. Press either or buttons during playback

to skip a chapter (DVD) or a track (CD) ahead or
backwards.

This function may not work during the “Warning”
section of a DVD.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

18

Using your Portable DVD Player

Using your Portable DVD Player

Let’s get started

Search forward or backward

1. During playback, press either or buttons to

fast search forwards or backwards.

2. Each press increases the search speed from 2X,

4X, 8X 16X & 32X the next press of the button will
resume normal playback.

This function may not work during the “Warning”
section of a DVD.

Display (DVD/CD)

1. When playing a disc, pressing the DISPLAY button

will display various information about the playing
disc. You will need to press the DISPLAY button
four times to view all the info another press will
hide the display info. (Fig 1)

TITLE

ELAPSED

Fig 1.

Different types of disc will show different options.

TITLE

REMAINING

CHAPTER
ELAPSED

CHAPTER

REMAINING

OFF

Menu (DVD)

1. Pressing the MENU button during playback

displays the disc main menu.

Title (DVD)

1. Pressing the TITLE button during playback displays

the discs title menu (if available).

The TITLE menu is the beginning track of a disc. (not
all discs contain these and as such the TITLE button
may not respond).

Numeric keypad (DVD/CD)

You can use the numeric keys to control various
functions on the player, for example:-

TRACK: when playing a CD disc

CHAPTER/TITLE: When playing a DVD disc.

1. Input the required chapter or track number using

the numeric keypad.

• Selecting chapter or track 1-9 simply press the
relavant number button.

• Chapter or track 10, press the 0/10 button.

• Chapter or track 22 (for example) press the 10+
button twice and then the 2 button. If the second
digit is ‘0’ press the 0/10 button.

Repeat (DVD/CD)

The repeat function allows you to view a section of a
disc repeatedly.

DVD

1. Press the REPEAT button to activate the first repeat

function CHAPTER.

2. Press again to swap to TITLE.

3. Press once more to swap to REPEAT ALL.

4. Another press of the REPEAT button disables the

function.

CD

1. Press the REPEAT button to activate the first repeat

function REPEAT 1.

2. Press again to swap to REPEAT ALL (repeats all

track on the current disc).

3. Another press of the REPEAT button disables the

function.

Some discs may not allow repeat functions.

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

Using your Portable DVD Player

19

Using your Portable DVD Player

Let’s get started

Multi-angle (DVD)

Some disc contain scenes which have been shot
simultaneously from a number of different angles. For
these discs, the same scene can be viewed from each
of these angles by using the ANGLE button.

1. During playback, pressing the ANGLE button will

cycle through the available angles (if any exist).

A single DVD disc can contain up to 9 different
viewing angles.

Mute (DVD, CD)

This function will instantly silence the audio.

1. Press the MUTE button, the audio will cease.

2. Press the MUTE button again to resume.

Audio tracks (DVD)

It is common for a DVD disc to contains more than
one audio track for example 5.1 audio, stereo audio and
other languages.

1. Press the AUDIO button to cycle through the

tracks.

This Portable DVD Player does NOT support DTS
audio. If you select a DTS audio track or one is
selected automatically no sound will be output.
Should this occur select a compatible audio track.

Subtitles (DVD)

Many DVD discs contain subtitle tracks to aid in various
ways.

1. Press the SUBTITLE button to activate the first set

of subtitles.

2. Press the SUBTITLE button repeatedly to cycle

through the available subtitle options.

3. Press the SUBTITLE button repeatedly until you

reach OFF to disable the subtitle function.

Zoom (DVD, Picture disc)

To zoom into the displayed image follow the below
steps.

1. Press the ZOOM button to activate the zoom

setting of 2X. Every subsequent press cycles
through the zoom options eg: 3X, 4X, 1/2, 1/3 &
1/4. The next press will return to the OFF setting.

2. When in ZOOM mode you can use the navigation

buttons on the remote to scroll the picture up,
down, left & right.

Zooming into the picture will degrade the quality of
the viewed image as the pixels are being stretched.

USB/DVD

Press the USB/DVD button to switch between DISC
playback and USB photo viewer.

Earphone usage

1. Connect earphones to the 3.5mm output on the

side of the main unit (21).

• Listen at moderate volumes to avoid hearing
damage.

• If you hear no sound during playing, do not turn up
volume up as the music may suddenly begin at a
high volume.

• Excessive sound pressure from earphones and
headphones can cause hearing loss.

• To avoid damaging your ears, adjust the volume to
the lowest safe level before playing, and turn up to

the desired level when playback has started.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

20

Using your Portable DVD Player

Using your Portable DVD Player

Let’s get started

JPG picture viewer

JPEG picture discs can be obtained from any good
photo developing lab, created manually on a computer
or you can load jpg images onto a USB flash drive.

1. Insert a disc or USB flash drive containing JPG

images into the Portable DVD Player.

2. If the files are on a disc the file browser menu will

be displayed. If the files are located on a USB flash
drive you will need to press the USB/DVD button
on the remote to switch to USB mode.

3. Use the navigation (

through the list of pictures & press the OK or
PLAY/PAUSE button to begin a slide show of the
folder starting at the selected image.

00:00 00:00
052/086

DSC00283

DSC00283

DSC00283

DSC00283

DSC00283

DSC00283

Resolution 2592 x 1944

4. Press the MENU button to return to the file

browser screen.

5. Press the

STOP button to display a thumbnail

view of the selected folder.

6. To display an image indefinitely press the

PAUSE button. To resume the slide show press the

PLAY/PAUSE button once again.

7. During the slide show the navigation buttons will

rotate the displayed image.

8. Press the

or next image.

9. Press the ZOOM button to activate the default

zoom setting of 100%. Every subsequent press
cycles through the zoom options eg: 100%, 125%,
150%, 200%, 75% & 50%.

10. Repeat can be set to SINGLE, REP ONE, REP

FOLDER or FOLDER by repeatedly pressing the
REPEAT button.

) buttons to scroll

PLAY/

/ buttons to skip to the previous

Program playback

1. Press the PROG button to begin the program

function.

_ _

1

_ _

2

_ _

3

_ _

4
5

_ _

Exit NEXT

2. Use the navigation buttons to highlight program

order number.

3. Enter the CHAPTER /TRACK number

EG:- Chapter/Track 22 would mean pressing the
‘10+’ button twice and then the ‘2’ button.

For more details see ‘Numeric keypad’ on page 19.

4. Repeat steps 2-3 until you have programmed all

the chapters/tracks required. Should you require
more chapters/tracks than 10, navigate to the
NEXT icon and press the OK button. Tracks 11-20
will now be programmable.

5. Once the programming is complete navigate to

the START icon and press the OK button to begin
playback of your programmed sequence.

_ _

6

_ _

7

_ _

8

_ _

9

_ _

10

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

Using your Portable DVD Player

21

Using your Portable DVD Player

Let’s get started

Setup menu

The setup menu contains various preferences for
functions found on the unit. To enter the Setup menu
press the SETUP button on the remote control.

- - General Setup Page - -

TV Display
Angle mark
OSD Lang
Screen Saver
Last Memory

Go To General Setup Page

Use the
button to select.

General

TV display

Choose a setting between:-

Angle mark

Enabling this function displays an icon for a compatible
disc when multiple angles are available for selection.

OSD lang

This option sets the On Screen Display language.
Choose between:-

• English • Spanish

• French • Portugese

• German • Dutch

• Italian

Wide
On
ENG
On
Off

buttons to scroll; press the OK

• 4:3/PS (pan and scan)

• 4:3/LB (letter box)

• Wide (widescreen).

• Wide squeeze

Screen saver

When the unit is not in use, the DVD logo will appear as
a screen saver to prevent screen burn in. Choose ON
or OFF.

Last memory

When set to ON the unit will remember the last
position on a disc before the unit was shut down
(STANDBY).

Audio (speaker setup)

Downmix

This option allows you to change the way the audio is
assigned to each speaker. Choose from:-

• LT/RT - Left / Right mixed mode

• STEREO - Stereo audio output

Video > Quality

Sharpness

Set the video sharpness level. Select from:-

• Low

• Medium

• High

Brightness

Set the video brightness level. Use the / buttons to
increase or decrease from -20 to +20. Press the OK
button to complete the setting.

Contrast

Set the video contrast level. Use the / buttons to
increase or decrease from -16 to +16. Press the OK
button to complete the setting.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

22

Using your Portable DVD Player

Using your Portable DVD Player

Let’s get started

Video > Quality

Hue

Set the video hue level. Use the / buttons to
increase or decrease from -9 to +9. Press the OK
button to complete the setting.

Saturation

Set the video saturation level. Use the / buttons
to increase or decrease from -9 to +9. Press the OK
button to complete the setting.

Preferences

TV type

Set this option to whatever type of disc you are
watching. NTSC, PAL or AUTO (to set automatically).

Audio

Choose the default audio setting. This means the
Portable DVD Player will automatically select this
language as the audio track (if available). Select from:-

• English • Spanish

• French • Portugese

• German • Dutch

• Italian

Subtitle

Select the default subtitle language. Select from:-

• English • Spanish

• French • Portugese

• German • Dutch

• Italian • Off

Disc menu

This option sets the default DVD menu language. Once
set if the DVD you are watching contains a menu with
your specified language that is used by default.
Select from:-

• English • Spanish

• French • Portugese

• German • Dutch

• Italian

Parental

Choose between:-

• Kid Safe • PG-R

• G • R

• PG • NC-17

• PG13 • Adult

When changing the parental level you will be asked to
enter the password. The default password is ‘1234’.

Password

1. Enter a new password. First you will be required

to enter the current password. This will be ‘1234’ if
changing for the first time.

2. Once you have entered a correct existing

password you can then enter your new password
and confirm. Press the OK button to save the new
password.

The master override password can be used if you
change the default but forget the new password.
The master password is ‘1369’.

Default

Activating this option resets every setting to the factory
default.

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

Using your Portable DVD Player

23

This page is left intentionally blank

Other information

4

Other information

Helpful technical information

Technical specification

Portable DVD Player

Power Supply: DC 12V 1200mAH

Input voltage DC 12V

Battery Lithium battery

Battery capacity 1200 mAH 7.4V

Dynamic range ≥85dB

Video output 1Vp-p 75: unbalanced

Frequency response 20Hz~20KHz

Screen size 9” (22.86cm)

Supported formats CDR, JPG, PICTURE CD - CD-R, DVD-R, DVD+R

Supported memory formats USB

Remote control

Battery 2 x AAA

Care & maintenance

Input: 100-240V ~ 50/60Hz 0.3A

After using the Portable DVD Player

Set to Standby.

Switch the unit off at the mains and unplug it if you are
leaving it unattended for a long period (holidays etc).

Avoid leaving the batteries fitted in the remote control
if you leave the unit unattended for long periods. They
may leak and damage the remote control.

Care & cleaning

All care and cleaning operations should be carried out
with the unit unplugged from the mains power.

Occasionally wipe the cabinet with a lint free duster.
Never clean the unit with liquids or solvents.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

Other information26

Product support 5

Product support

Help is always at hand

Troubleshooting

No power.

• The internal battery is flat. Re-charge the battery.

• Ensure the mains adaptor is connected to a power supply & the portable DVD player, and is switched ON.

• Make sure there is power to the mains socket.

No picture?

• The TFT button has been pressed disabling the image on the internal display. Press the TFT button to enable the
internal display once more.

• Incorrect connections made if using external source or TV. Re-check the connections.

No sound?

• The volume level is too low. Increase the volume.

• Non compatible DTS audio track selected. Choose another audio track as this Portable DVD Player does not
support DTS audio.

Distorted picture

• The disc may be dirty. Clean the disc and try again

• The fast forward or rewind mode may be active. Picture distortion in this mode is normal.

Unable to play

• There is no disc in the tray.

• The disc is not loaded properly. Press the disc compartment eject button and re-seat the disc.

• The disc may be dirty. Clean the disc and try again

• The setup menu is obscuring the picture. Press the SETUP button to close the menu

The remote control is not working

• The batteries may be low on power. Replace with new batteries.

• There may be an object obscuring the path to the DVD IR sensor.

• The remote control may be too far away from the IR sensor to work.

Forgotten your pass code.

• The default override pass code is ‘1369’

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

28

Product support

Product support

Help is always at hand

Help and assistance

If you require any technical guidance or find that your Portable DVD Player is not operating as intended, a simple
solution can often be found in the Troubleshooting section of these instructions or online at

www.argos-support.co.uk

If you still require further assistance, call one of our experts on 0345 604 0105*. To help give us give you a fast and
efficient service please have the following information ready:

Model Ref.

Serial number

Date of purchase

Local call rates applies*

CDVD9SW

You can find these on
the rating plate - a small
information panel (usually
a sticker or metal plate) on
the rear of your product

This will be shown on
your receipt

Lines open 8am-7pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tari. Mobile and other
providers costs may vary, see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from
Republic of Ireland will attract international call charges.

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

Product support

29

Product support

Help is always at hand

Disposal

• Disposal of your old product. Your product
is designed and manufactured with high
quality materials and components, which
can be recycled and reused

• When this crossed out wheeled bin
symbol is attached to a product it means
the product is covered by the European
Directive 2002/96/EC.

• Please make yourself aware of the local
collection system for electrical and
electronic products.

• Please act according to your local rules
and do not dispose of your old products
with your normal household waste.

• The correct disposal of your old product
will help prevent potential negative
consequences for the environment and
human health.

This product is intended for use within

the UK. This equipment complies with the
essential requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.

This appliance complies with the following EEC
directives: 2014/35/EU Low voltage directive /
2014/30/EU EMC directive

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

30

Product support

Product support

Help is always at hand

Call us now and activate your 12 month guarantee

Thank you for choosing Bush. Your new product is guaranteed against faults and
breakdowns for 12 months. Don’t forget to register it with us today so we can provide you
with our best possible after-sales service and useful updates.

www.bushregistration.co.uk

FREEPHONE*

0800 597 8548

Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.

Your Bush Guarantee

This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to
faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the
purchase price refunded) where possible during this period by the dealer from who your purchased the unit.

The guarantee is subject to the following provisions:

• The guarantee does not cover accidental damage,
misuse, cabinet parts, knobs or consumable items.

• The product must be correctly installed and
operated in accordance with the instructions
contained in the manual.

• It must be used solely for domestic purposes. The
guarantee will be rendered invalid if the product is

re-sold or has been damaged by inexpert repair.

• Specifications are subject to change without notice.

• Bush disclaim any liability for loss or damage arising
from the breakdown of the product.

• This guarantee is in addition to and does not
diminish your statutory or legal rights.

Important Data Protection Information

If you provide us with information about another
person, you confirm that they have appointed you
to act for them, to consent to the processing of their
personal data including sensitive personal data and
that you have informed them of our identity and the
purposes (as set out in the Important Data Privacy
notice displayed overleaf) for which their personal data
will be processed.

You are entitled to ask for a copy of the information
we hold about you (for which we may charge a small
fee) and to have any inaccuracies in your information
corrected.

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.

Guarantor: Argos Limited - 489 - 499 Avebury Blvd. - Milton Keynes - MK9 2NW

For quality control and training purposes, we may
monitor or record your communications with us.

If your personal details change, if you change your
mind about any of your marketing preferences or if you
have any queries about how we use your information,
please let us know by contacting our Data Protection
Officer, Domestic & General, Leicester House
17 Leicester Street, Bedworth, Warwickshire
CV12 8JP.

Product support

31

Contact:

www.argos-support.co.uk

Helpline: 0345 604 0105