Burr Brown PGA103P, PGA103U Datasheet
®
®
PGA103
Programmable Gain
AMPLIFIER
FEATURES
● DIGITALLY PROGRAMABLE GAINS:
G=1, 10, 100V/V
● CMOS/TTL-COMPATIBLE INPUTS
● LOW GAIN ERROR:
● LOW OFFSET VOLTAGE DRIFT: 2µV/
±0.05% max, G=10
°C
● LOW QUIESCENT CURRENT: 2.6mA
● LOW COST
● 8-PIN PLASTIC DIP, SO-8 PACKAGES
APPLICATIONS
● DATA ACQUISITION SYSTEMS
● GENERAL PURPOSE ANALOG BOARDS
● MEDICAL INSTRUMENTATION
V+ V–
DESCRIPTION
The PGA103 is a programmable-gain amplifier for
general purpose applications. Gains of 1, 10, or 100 are
digitally selected by two CMOS/TTL-compatible inputs. The PGA103 is ideal for systems that must
handle wide dynamic range signals.
The PGA103’s high speed circuitry provides fast settling time, even at G=100 (8µs to 0.01%). Bandwidth
is 250kHz at G=100, yet quiescent current is only
2.6mA. It operates from ±4.5V to ±18V power
supplies.
The PGA103 is available in 8-pin plastic DIP and
SO-8 surface-mount packages, specified for the –40°C
to +85°C temperature range.
8
6
4
V
IN
GAIN A1A
100
International Airport Industrial Park • Mailing Address: PO Box 11400 • Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd. • Tucson, AZ 85706
Tel: (520) 746-1111 • Twx: 910-952-1111 • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
©
1993 Burr-Brown Corporation PDS-1208B Printed in U.S.A. November, 1993
PGA103
1
2
0
1
0
10
0
0
1
1
0
1
7
V
3
O
VO = G • V
IN
PGA103
SPECIFICATIONS
ELECTRICAL
TA = +25°C, VS = ±15V, RL = 2kΩ unless otherwise specified.
PGA103P, U
PARAMETER CONDITIONS MIN TYP MAX UNITS
INPUT
Offset Voltage, RTI
G = 1 T
G = 10 ±100 ±500 µV
G = 100 ±100 ±500 µV
vs Temperature T
G = 1 ±5 µV/°C
G = 10 ±2 µV/°C
G = 100 ±2 µV/°C
vs Power Supply V
G = 1 30 70 µV/V
G = 10 10 35 µV/V
G = 100 10 35 µV/V
Impedance 10
INPUT BIAS CURRENT
Initial Bias Current ±50 ±150 nA
vs Temperature ±100 pA/°C
NOISE VOLTAGE, RTI G = 100, R
f = 10Hz 16 nV/√Hz
f = 100Hz 11 nV/√Hz
f = 1kHz 11 nV/√Hz
f
= 0.1Hz to 10Hz 0.6 µVp-p
B
NOISE CURRENT
f = 10Hz 2.8 pA/√Hz
f = 1kHz 0.3 pA/√Hz
f
= 0.1Hz to 10Hz 76 pAp-p
B
GAIN
Gain Error
G = 1 ±0.005 ±0.02 %
G = 10 ±0.02 ±0.05 %
G = 100 ±0.04 ±0.2 %
Gain vs Temperature
G = 1 ±2 ppm/°C
G = 10 ±10 ppm/°C
G = 100 ±30 ppm/°C
Nonlinearity
G = 1 ±0.001 ±0.003 % of FSR
G = 10 ±0.002 ±0.005 % of FSR
G = 100 ±0.004 ±0.01 % of FSR
OUTPUT
Voltage, Positive (V+) –3.5 (V+) –2.5 V
Negative (V–) +3.5 (V–) +2.5 V
Load Capacitance, max 1000 pF
Short-Circuit Current ±25 mA
FREQUENCY RESPONSE
Bandwidth, –3dB
G = 1 1.5 MHz
G = 10 750 kHz
G = 100 250 kHz
Slew Rate V
Settling Time, 0.1%
G = 1 2 µs
G = 10 2.2 µs
G = 100 6.5 µs
Settling Time, 0.01%
G = 1 2.5 µs
G = 10 2.5 µs
G = 100 8 µs
Overload Recovery 50% Overdrive 2.5 µs
DIGITAL LOGIC INPUTS
Digital Low Voltage –5.6 0.8 V
Digital Low or High Current 1 µA
Digital High Voltage 2V+V
= +25°C ±200 ±1500 µV
A
= T
to T
A
MIN
MAX
= ±4.5V to ±18V
S
8
|| 2 Ω || pF
= 0Ω
S
= ±10V 9 V/µs
O
®
PGA103
2
®
SPECIFICATIONS (CONT)
ELECTRICAL
TA = +25°C, VS = ±15V, RL = 2kΩ unless otherwise specified.
PGA103P, U
PARAMETER CONDITIONS MIN TYP MAX UNITS
POWER SUPPLY
Voltage Range ±4.5 ± 15 ±18 V
Current V
TEMPERATURE RANGE
Specification –40 +85 °C
Operating –40 +125 °C
θ
: P or U Package 100 °C/W
JA
PIN CONFIGURATION ABSOLUTE MAXIMUM RATINGS
Top View DIP/SO-8
Ground
V
1
A
0
2
A
1
3
4
IN
8
V+
7
V
O
6
V–
5
NC
ORDERING INFORMATION
MODEL PACKAGE TEMPERATURE RANGE
PGA103P 8-Pin Plastic DIP –40°C to +85°C
PGA103U SO-8 Surface-Mount –40°C to +85°C
= 0V ±2.6 ±3.5 mA
IN
Supply Voltage................................................................................. ±18V
Analog Input Voltage Range ..................................................... V– to V+
Logic Input Voltage Range ........................................................ V– to V+
Output Short Circuit (to ground) ............................................ Continuous
Operating Temperature ................................................ –40°C to +125°C
Storage Temperature.................................................... –40°C to +125°C
Junction Temperature ................................................................... +150°C
Lead Temperature (soldering,10s) .............................................. +300°C
PACKAGE INFORMATION
MODEL PACKAGE NUMBER
PGA103P 8-Pin Plastic DIP 006
PGA103U SO-8 Surface-Mount 182
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix D of Burr-Brown IC Data Book.
PACKAGE DRAWING
(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
Any integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and
installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet published specifications.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
3
PGA103
Loading...