Burr Brown OPA2344EA, OPA344UA-2K5, OPA345NA-3K, OPA345UA, OPA4344UA Datasheet

®

®

OPA342

OPA4344

OPA344

OPA345

OPA344

OPA2344
OPA4344

OPA345

OPA2345

For most current data sheet and other product

information, visit www.burr-brown.com

OPA4345

LOW POWER, SINGLE-SUPPLY, RAIL-TO-RAIL

OPERA TIONAL AMPLIFIERS

Micro

Amplifier

FEATURES

● RAIL-TO-RAIL INPUT

● RAIL-TO-RAIL OUTPUT (within 1mV)

● LOW QUIESCENT CURRENT: 150µA typ

●

Micro

SIZE PACKAGES
SOT23-5
MSOP-8
TSSOP-14

● GAIN-BANDWIDTH

OPA344: 1MHz, G ≥ 1
OPA345: 3MHz, G ≥ 5

● SLEW RATE

OPA344: 0.8V/µs
OPA345: 2V/µs

● THD + NOISE: 0.006%

APPLICATIONS

● PCMCIA CARDS

● DATA ACQUISITION

● PROCESS CONTROL

● AUDIO PROCESSING

● COMMUNICATIONS

● ACTIVE FILTERS

● TEST EQUIPMENT

OPA2344, OPA2345

Out A

–In A
+In A

V–

1

A

2
3
4

8
7

B

6
5

V+
Out B
–In B
+In B

Out

V–

+In

NC
–In
+In

V–

1
2
3

1
2
3
4

OPA344, OPA345

OPA344, OPA345

SOT23-5

™

Series

DESCRIPTION

The OPA344 and OPA345 series rail-to-rail CMOS
operational amplifiers are designed for precision, low­power, miniature applications. The OPA344 is unity
gain stable, while the OPA345 is optimized for gains
greater than or equal to five, and has a gain-bandwidth
product of 3MHz.

The OPA344 and OPA345 are optimized to operate on
a single supply from 2.5V and up to 5.5V with an input
common-mode voltage range that extends 300mV
beyond the supplies. Quiescent current is only
250µA (max).

Rail-to-rail input and output make them ideal for driving
sampling analog-to-digital converters. They are also well
suited for general purpose and audio applicaitons and
providing I/V conversion at the output of D/A converters.
Single, dual and quad versions have identical specs for
design flexibility.

A variety of packages are available. All are specified for
operation from –40ºC to 85ºC. A SPICE macromodel is
available for design analysis.

V+

5

–In

4

Out A

–In A
+In A

NC

8

V+

7

Out

6

NC

5

+V
+In B
–In B

Out B

OPA4344, OPA4345

1
2
3
4
5
6
7

AD

BC

Out D

14

–In D

13

+In D

12

–V

11

+In C

10

–In C

9

Out C

8

SO-8, MSOP-8, 8-Pin DIP (OPA2344 Only)

International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: [phone]

Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: [phone] • Immediate Product Info: [phone]

© 2000 Burr-Brown Corporation PDS-1486A Printed in U.S.A. April, 2000

SO-8, 8-Pin DIP (OPA344 Only)

TSSOP-14, SO-14, 14-PIn DIP (OPA4344 Only)

SPECIFICATIONS: VS = 2.7V to 5.5V

At TA = +25°C, RL = 10kΩ connected to VS/ 2 and V

Boldface limits apply over the temperature range, T

PARAMETER CONDITION MIN TYP MAX UNITS
OFFSET VOLTAGE

Input Offset Voltage V

Over Temperature
vs Temperature dV

vs Power Supply PSRR V

OS

/dT ±3 µV/°C

OS

Over Temperature V

Channel Separation, dc 0.2 µV/V

f = 1kHz 130 dB

INPUT BIAS CURRENT

Input Bias Current I

Over Temperature See Typical Curve pA

Input Offset Current I

OS

NOISE

Input Voltage Noise f = 0.1 to 50kHz 8 µVrms
Input Voltage Noise Density e
Current Noise Density i

INPUT VOLTAGE RANGE

Common-Mode Voltage Range V
Common-Mode Rejection Ratio CMRR V

CM

Over Temperature V

Common-Mode Rejection CMRR V

Over Temperature V

Common-Mode Rejection CMRR V

Over Temperature V

INPUT IMPEDANCE

Differential 10
Common-Mode 10

OPEN-LOOP GAIN

Open-Loop Voltage Gain A

Over Temperature R

OL

Over Temperature R

FREQUENCY RESPONSE C

Gain-Bandwidth Product GBW 1 MHz
Slew Rate SR 0.8 V/µs
Settling Time, 0.1% V

0.01% V
Overload Recovery Time V
Total Harmonic Distortion + Noise THD+N V

OUTPUT

Voltage Output Swing from Rail

(1)

Over Temperature R

Over Temperature R

Short-Circuit Current I
Capacitive Load Drive C

SC

LOAD

POWER SUPPLY

Specified Voltage Range V
Operating Voltage Range 2.5 to 5.5 V
Quiescent Current (per amplifier) I

Over Temperature 300 µA

TEMPERATURE RANGE

Specified Range –40 85 °C
Operating Range –55 125 °C
Storage Range –65 150 °C
Thermal Resistance

θ

SOT23-5 Surface Mount 200 °C/W
MSOP-8 Surface Mount 150 °C/W
8-Pin DIP 100 °C/W
SO-8 Surface Mount 150 °C/W
TSSOP-14 Surface Mount 100 °C/W
14-Pin DIP 80 °C/W
SO-14 Surface Mount 100 °C/W

NOTE: (1) Output voltage swings are measured between the output and power-supply rails.

®

OPA344, 2344, 4344
OPA345, 2345, 4345

= VS/ 2, unless otherwise noted.

OUT

= –40°C to +85°C.

A

OPA344NA, UA, PA
OPA2344EA, UA, PA
OPA4344EA, UA, PA

VS = +5.5V, VCM = VS/2 ±0.2 ±1mV

±0.8 ±1.2 mV

= 2.7V to 5.5V, V

S

= 2.7V to 5.5V, V

S

B

n
n

= +5.5V, –0.3V < VCM < (V+)-1.8 76 92 dB

S

= +5.5V, –0.3V < VCM < (V+)-1.8 74 dB

S

S

S

f = 10kHz 30 nV/√Hz
f = 10kHz 0.5 fA/√Hz

= +5.5V, –0.3V < VCM < 5.8V 70 84 dB
= +5.5V, –0.3V < VCM < 5.8V 68 dB

= +2.7V, –0.3V < VCM < 3V 66 80 dB

S

= +2.7V, –0.3V < VCM < 3V 64 dB

S

RL = 100kΩ, 10mV < VO < (V+) –10mV 104 122 dB

= 100kΩ, 10mV < VO < (V+) –10mV 100 dB

L

= 5kΩ, 400mV < VO < (V+) –400mV 96 120 dB

R

L

= 5kΩ, 400mV < VO < (V+) –400mV 90 dB

L

L

= 5.5V, 2V Step 5 µs

S

= 5.5V, 2V Step 8 µs

S

= 5.5V, VO = 3Vp-p, G = 1, f = 1kHz 0.006 %

S

IN

RL = 100kΩ, AOL ≥ 96dB 1 mV

= 100kΩ, AOL ≥ 104dB 3 10 mV

R

L

= 100kΩ, AOL ≥ 100dB 10 mV

L

= 5kΩ, A

R

L

= 5kΩ, AOL ≥ 90dB 400 mV

L

S

Q

JA

VS = 5.5V, IO = 0 150 250 µA

< (V+) -1.8V 30 200 µV/V

CM

< (V+) -1.8V 250 µV/V

CM

±0.2 ±10 pA

±0.2 ±10 pA

–0.3 (V+) + 0.3 V

13

|| 3 Ω || pF

13

|| 6 Ω || pF

= 100pF

• G = V

S

≥ 96dB 40 400 mV

OL

2.5 µs

±15 mA

See Typical Curve

2.7 5.5 V

2

SPECIFICATIONS: VS = 2.7V to 5.5V

At TA = +25°C, RL = 10kΩ connected to VS/ 2 and V

Boldface limits apply over the temperature range, T

PARAMETER CONDITION MIN TYP MAX UNITS
OFFSET VOLTAGE

Input Offset Voltage V

Over Temperature
vs Temperature dV

vs Power Supply PSRR V

OS

/dT ±3 µV/°C

OS

Over Temperature V

Channel Separation, dc 0.2 µV/V

f = 1kHz 130 dB

INPUT BIAS CURRENT

Input Bias Current I

Over Temperature See Typical Curve pA

Input Offset Current I

OS

NOISE

Input Voltage Noise f = 0.1 to 50kHz 8 µVrms
Input Voltage Noise Density e
Current Noise Density i

INPUT VOLTAGE RANGE

Common-Mode Voltage Range V
Common-Mode Rejection Ratio CMRR V

CM

Over Temperature V

Common-Mode Rejection Ratio CMRR V

Over Temperature V

Common-Mode Rejection Ratio CMRR V

Over Temperature V

INPUT IMPEDANCE

Differential 10
Common-Mode 10

OPEN-LOOP GAIN

Open-Loop Voltage Gain A

Over Temperature R

Over Temperature R

FREQUENCY RESPONSE C

Gain-Bandwidth Product GBW 3 MHz
Slew Rate SR 2 V/µs
Settling Time, 0.1% G = 5, 2V Output Step 1.5 µs

0.01% G = 5, 2V Output Step 1.6 µs
Overload Recovery Time V
Total Harmonic Distortion + Noise THD+N V

OUTPUT

Voltage Output Swing from Rail

(1)

Over Temperature R

Over Temperature R

Short-Circuit Current I
Capacitive Load Drive C

SC

LOAD

POWER SUPPLY

Specified Voltage Range V
Operating Voltage Range 2.5 to 5.5 V
Quiescent Current (per amplifier) I

Over Temperature 300 µA

TEMPERATURE RANGE

Specified Range –40 85 °C
Operating Range –55 125 °C
Storage Range –65 150 °C
Thermal Resistance

θ

SOT23-5 Surface Mount 200 °C/W
MSOP-8 Surface Mount 150 °C/W
SO-8 Surface Mount 150 °C/W
TSSOP-14 Surface Mount 100 °C/W
SO-14 Surface Mount 100 °C/W

NOTE: (1) Output voltage swings are measured between the output and power-supply rails.

= VS/2, unless otherwise noted.

OUT

= –40°C to +85°C.

A

OPA345NA, UA
OPA2345EA, UA
OPA4345EA, UA

VS = +5.5V, VCM = VS/2 ±0.2 ±1mV

±0.8 ±1.2 mV

= 2.7V to 5.5V, V

S

= 2.7V to 5.5V, V

S

B

n
n

= +5.5V, –0.3V < VCM < (V+)-1.8 76 92 dB

S

= +5.5V, –0.3V < VCM < (V+)-1.8 74 dB

S

S

S

RL = 100kΩ, 10mV < VO < (V+) –10mV 104 122 dB

OL

= 100kΩ, 10mV < VO < (V+) –10mV 100 dB

L

= 5kΩ, 400mV < VO < (V+) –400mV 96 120 dB

R

L

= 5kΩ, 400mV < VO < (V+) –400mV 90 dB

L

= 5.5V, VO = 2.5Vp-p, G = 5, f = 1kHz 0.006 %

S

f = 10kHz 30 nV/√Hz
f = 10kHz 0.5 fA/√Hz

= +5.5V, –0.3V < VCM < 5.8V 70 84 dB
= +5.5V, –0.3V < VCM < 5.8V 68 dB

= +2.7V, –0.3V < VCM < 3V 66 80 dB

S

= +2.7V, –0.3V < VCM < 3V 64 dB

S

L

IN

RL = 100kΩ, AOL ≥ 96dB 1 mV

= 100kΩ, AOL ≥ 104dB 3 10 mV

R

L

= 100kΩ, AOL ≥ 100dB 10 mV

L

= 5kΩ, A

R

L

= 5kΩ, AOL ≥ 90dB 400 mV

L

S

Q

JA

VS = 5.5V, IO = 0 150 250 µA

< (V+) -1.8V 30 200 µV/V

CM

< (V+) -1.8V 250 µV/V

CM

±0.2 ±10 pA

±0.2 ±10 pA

–0.3 (V+) + 0.3 V

13

|| 3 Ω || pF

13

|| 6 Ω || pF

= 100pF

• G = V

S

≥ 96dB 40 400 mV

OL

2.5 µs

±15 mA

See Typical Curve

2.7 5.5 V

3

OPA345, 2345, 4345

OPA344, 2344, 4344

®

ABSOLUTE MAXIMUM RATINGS

Supply Voltage, V+ to V- ................................................................... 7.5V

Signal Input Terminals, Voltage

Output Short-Circuit

Operating Temperature ..................................................–55°C to +125°C

Storage Temperature ..................................................... –65°C to +150°C

Junction Temperature ...................................................................... 150°C

Lead Temperature (soldering, 10s) ................................................. 300°C

ESD Tolerance (Human Body Model) ............................................ 4000V

NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only. Functional opera­tion of the device at these conditions, or beyond the specified operating
conditions, is not implied. (2) Input terminals are diode-clamped to the power
supply rails. Input signals that can swing more than 0.5V beyond the supply
rails should be current-limited to 10mA or less. (3) Short-circuit to ground,
one amplifier per package.

(3)

(2)

..................... (V–) –0.5V to (V+) +0.5V

(2)

Current

.............................................................. Continuous

.................................................... 10mA

(1)

ELECTROSTATIC
DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage. ESD damage
can range from subtle performance degradation to complete
device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.

PACKAGE/ORDERING INFORMATION

PACKAGE SPECIFIED

PRODUCT PACKAGE NUMBER RANGE MARKING NUMBER

DRAWING TEMPERATURE PACKAGE ORDERING TRANSPORT

OPA344NA SOT23-5 331 –40°C to +85°C B44 OPA344NA/250 Tape and Reel

"""""OPA344NA /3K Tape and Reel

OPA344UA SO-8 182 –40 °C to +85°C OPA344UA OPA344UA Rails

"""""OPA344UA /2K5 Tape and Reel

OPA344PA 8-Pin Dip 006 –40° C to +85°C OPA344PA OPA344PA Rails
OPA2344EA MSOP-8 337 –40°C to +85°C C44 OPA2344EA /250 Tape and Reel

"""""OPA2344EA /2K5 Tape and Reel

OPA2344UA SO-8 182 –40°C to +85°C OPA2344UA OPA2344UA Rails

"""""OPA2344UA /2K5 Tape and Reel

OPA2344PA 8-Pin DIP 006 –40°C to +85°C OPA2344PA OPA2344PA Rails
OPA4344EA TSSOP-14 357 –40°C to +85°C OPA4344EA OPA4344EA/250 Rails

"""""OPA4344EA /2K5 Tape and Reel

OPA4344UA SO-14 235 –40°C to +85°C OPA4344UA OPA4344UA Rails

"""""OPA4344UA /2K5 Tape and Reel

OPA4344PA 14-Pin DIP 010 –40°C to +85°C OPA4344PA OPA4344PA Rails

OPA345NA SOT23-5 331 –40°C to +85°C A45 OPA345NA/250 Tape and Reel

" " " " " OPA345NA/3K Tape and Reel

OPA345UA SO-8 182 –40 °C to +85°C OPA345UA OPA345UA Rails

" " " " " OPA345UA/2K5 Tape and Reel

OPA2345EA MSOP-8 337 –40°C to +85°C B45 OPA2345EA/250 Tape and Reel

"""""OPA2345EA /2K5 Tape and Reel

OPA2345UA SO-8 182 –40°C to +85°C OPA2345UA OPA2345UA Rails

"""""OPA2345UA /2K5 Tape and Reel

OPA4345EA TSSOP-14 357 –40°C to +85°C OPA4345EA OPA4345EA/250 Tape and Reel

"""""OPA4345EA /2K5 Tape and Reel

OPA4345UA SO-14 235 –40°C to +85°C OPA4345UA OPA4345UA Rails

"""""OPA4345UA /2K5 Tape and Reel

NOTE: (1) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /2K5 indicates 2500 devices per reel). Ordering 2500 pieces
of “OPA344UA/2K5” will get a single 2500-piece Tape and Reel.

(1)

MEDIA

®

OPA344, 2344, 4344
OPA345, 2345, 4345

4