Burndy PENETROX A, PENETROX A-13, PENETROX E Catalog Page

BURNDY

Accessories

M-4

PENETROX E

PENETROX E consists of a non-petroleum
base vehicle in which copper granules are
suspended. Recommended for copper to
copper applications, grounding and for use
on copper conduit threads. UL listed.

Easy to apply:

1. Scratch brush the conductor surfaces until
bright and clean.

2. Immediately apply PENETROX™ to the
conductive surfaces.

3. For EHV applications, remove all excess
PENETROX™ after installation is com­plete.

SHELF LIFE

When stored in its original container in cool
(under 100° F) dry environment, PENE­TROX™ oxide inhibiting compound will
remain workable and functional for (5) years
from the date marked on the container pro­vided it is mixed per instructions prior to use.

CATALOG NUMBER CONTAINER CONTAINER

PENETROX™ A PENETROX™ A-13 PENETROX™ E TYPE SIZE

PENA 1/2 ——TUBE 1/2 oz.

PEN A-4 PEN A13-4 PEN E-4 SQUEEZE BOTTLE 4 oz.

P8A PEN A13-8 PEN E-8 SQUEEZE BOTTLE 8 oz.

PEN A-1LB PENA13-1LB — CARTRIDGE 1 lb.*

PEN A-QT PEN A13-QT PEN E-QT PLASTIC TUB 1 QUART

PEN A-GAL PEN A13-GAL PEN E-GAL CAN 1 GALLON

PEN A-5GAL PEN A13-5GAL PEN E-5GAL PAIL 5 GALLONS

PEN A-55GAL PEN A13-55GAL PEN E-55GAL DRUM 55 GALLONS

* 1 lb. cartridge will fit standard caulking guns.

VALUE

PENETROX™ PENETROX™

PROPERTY DEFINITION E & A13 A

PENETRATION

(UNWORKED)

250 230

DROPPING

POINT (MIN)

500° F 230° F

POUR POINT

(MAX.)

–10° F –15° F

PENETROX A,
A-13 AND E

TECHNICAL INFORMATION

PENETROX A

PENETROX A consists of a natural (petro­leum) base vehicle in which zinc particles are
suspended. For aluminum to aluminum,
aluminum to copper applications and
aluminum conduit threads. It is not recom­mended for use with rubber and polyethylene
insulated conductors. UL listed to 600 volts.

PENETROX A-13

PENETROX A-13 consists of a non­petroleum base vehicle in which zinc parti­cles are suspended. Recommended for
aluminum to aluminum, aluminum to copper
applications and aluminum conduit threads.
Compatible with insulating materials such as
rubber, or polyethylene.UL listed and recom­mended for all voltages.

ORDERING INFORMATION

PROPERTIES OF PENETROX

®

* MSDS sheets available through customer service.

The value in accordance to ASTM D217 indi­cates the consistency of a grease. The higher
the number, the softer the grease.

The temperature at which the grease passes
from the semi-solid to a liquid state under test
conditions.

The lowest temperature at which the compound
will flow. Pour point is the lubricant’s ability to
perform in cold conditions.