Page 1
Getting the best from your kettle...
• Empty the water out of the kettle after first boiling to clean away any
deposits that are left in the kettle after the manufacturing process.
• It is important to descale as the performance of the kettle and auto
switch-off will be impaired.
•Always pour water slowly and carefully to prevent the splashing of
scalding water.
Model 77008
Weight 1.62kg
Dimensions
H280mm, W305mm, D230mm
4 litre capacity
Burco Appliances Limited
A MEMBER OF THE GLEN DIMPLEX GROUP
Talbot Road, Mexborough,
South Yorkshire, S64 8AJ
www.burco.co.uk
Keep warm
function (4 litre only)
1 Fill the kettle and switch on as
normal.
2 Push the keep warm button fl to
the on position, the indicator will
light.
3 The kettle will boil as normal. The
keep warm feature will then keep
the water in the kettle at near to
boiling point.
4 To reboil activate the on/off
switch. The kettle will reboil in a
few seconds.
Please note: The keep warm
function can be activated at any time
in the boil cycle.
Cleaning
Before cleaning and maintenance,
switch the appliance off, unplug it and
allow to cool.
• Wipe the outside with damp
cloth.
IMPORTANT: Do not use abrasive
cleaners on the outside of the kettle
which may scratch the surface.
Descaling
In hard water areas scale will
form on the element and walls. This
will adversely affect the operation of
the kettle if allowed to accumulate.
Descaling can be simply achieved by
using a proprietary descaler. Choose
one recommended for stainless steel
kettles. It is important to follow the
instructions given on the descaling
solution carton.
IMPORTANT Failure to de-scale
will invalidate your guarantee.
Guarantee
This electric catering kettle is
guaranteed for a period of 12 months
from the date of purchase against
defective materials or faulty
workmanship.
This guarantee is given subject to
the kettle being used in accordance
with the instructions on the supply
voltage marked on it and to the usual
fair wear and tear conditions.
The guarantee does not cover
consequential damage arising out of
any failure acceptable under
guarantee, nor does it cover damage
resulting from misuse, accident or
unauthorised alterations to the kettle.
Proof of purchase will be required.
In any communication with the
manufacturer, it is essential to quote
the model and serial number marked
on the base of the kettle.
This guarantee, in no way
diminishes the buyer’s statutory
rights.
Please fill in and return the tear
off section to register the guarantee
with Burco.
CP77007 M UK 11/04
Marketing Department
Burco Appliances Ltd
Talbot Road
Mexborough
South Yorkshire
S64 8AJ
Affix
postage stamp
here
Commercial kettle
Please read and keep these
instructions
Burco Appliances products are intended for commercial use as detailed in
these instructions.
Burco Appliances has a policy of continuous improvement in product quality
and design. The Company, therefore, reserves the right to change the
specification of its models at any time.
Model 77007
Weight 0.87kg
Dimensions
H225mm, W270mm, D200mm
2 litre capacity
77007 comm kettle Rev 1 18/1/05 11:33 AM Page 1
Page 2
Guarantee registration
Appliance model
Serial no.
Date of purchase
Customer name
Address
Please help us to further improve our products by ticking the one
main reason for purchase
Price
■■
Styling/Appearance
■■
Features ■■Previous Burco ownership
■■
Dealer recommendation
■■
Service back-up
■■
Other (please state)
Where did you buy your Burco appliance ?
Dealer/Retailer
Would you like more information on Burco products?
Yes
■■
No
■■
32
CUT HERE & DETACH
Important safety
instructions
The use of any electrical appliance
requires following common sense
safety rules.
Primarily there is danger of
personal injury and secondly danger of
damage to the appliance and
property. These are indicated in the
instructions text by the following two
conventions:
WARNING: Danger of
personal injury
IMPORTANT: Damage to the
appliance
In addition we offer the following
essential safety advice.
Location
•Always locate your kettle away
from the edge of a worktop.
• Ensure that the kettle is used on a
firm flat surface.
• Do not use the kettle outdoors or
in a bathroom.
•WARNING: Do not place the
kettle onto a metal tray or
metal surface whilst in use.
Personal safety
•To protect against fire, electric
shock and personal injury do not
immerse the mains lead, plug or
kettle in water or any other liquid.
•Always pour hot water slowly and
carefully without tipping the kettle
too fast to prevent splashing and
spillage.
•Extreme caution must be used
when moving a kettle containing
hot water.
•Do not touch hot surfaces, use
handles or knobs.
•Always close the lid securely,
otherwise the kettle may not
switch off automatically and may
spit out boiling water.
•Avoid contact with steam from the
spout when the water is boiling or
just after it has switched off.
•Take care if opening the lid for
refilling when the kettle is hot.
•Do not fill above the MAX mark,
otherwise boiling water may be
ejected.
•Do not hold the switch in the on
position or tamper with the switch
to fix it in the on position as this
may cause damage to the switch-
off mechanism.
• Unplug from the outlet before
cleaning.
•Allow to cool before putting on or
taking off parts and before
cleaning.
Mains lead
• The mains lead should reach from
the socket to the kettle without
straining the connections.
• Do not let the mains lead hang
over the edge of the table or the
counter where a child could reach
it and keep it away from any hot
surfaces.
• Do not let the lead run across an
open space e.g. between a low
socket and table.
• Do not let the lead run across a
cooker or toaster or other hot area
which might damage the lead.
•Do not place the kettle where the
mains lead could fall into a sink.
Children
• Children do not understand the
dangers associated with operating
electrical appliances. Never allow
children to use this appliance.
Other safety
considerations
•Do not operate with a damaged
lead or plug, or after an appliance
has malfunctioned, or has been
dropped or damaged in any way.
Contact Burco Appliances for
advice on examination, repair, or
electrical or mechanical
adjustment.
• The use of attachments or tools
not recommended or sold by
Burco may cause fire, electric
shock or injury.
•Do not place on or near a hot gas
or electric burner, or in a heated
oven.
• Do not tamper with the connector
in anyway.
• Do not use the kettle for any use
other than to boil water.
•Disconnect the kettle from the
mains supply when filling or
pouring.
• Unplug from the mains outlet
when not in use and before
cleaning.
Treating scalds
• Run cold water over the affected
immediately. Do not stop to
remove clothing get medical help
quickly.
Electrical
requirements
Check that the voltage on the
rating plate of your appliance
corresponds with your electricity
supply which must be A.C. (Alternating
Current).
If the socket outlets are not
suitable for the plug supplied with this
appliance, the plug should be removed
and the appropriate one fitted.
WARNING: The plug removed
from the mains lead, if severed,
must be destroyed as a plug with
bared flexible cord is hazardous
if engaged into a live socket
outlet.
WARNING: This appliance
must be earthed.
Should the fuse in the 13A plug
require changing, a 13A BS 1362 fuse
must be fitted.
Features
⁄ Lid handle
¤ Spout
‹ 2 litre exposed element
4 litre concealed element
› Mains connector
fi On off switch/indicator light
fl Keep warm switch/indicator light
‡ Secondary support handle
Before first use
1 Remove all packaging.
2 Empty the water out of the kettle
after first boiling to clean away
any deposits that are left in the
kettle after the manufacturing
process.
3 Rinse thoroughly and wipe dry.
Using
1 Fill the kettle with at least enough
water to cover the element.
When filling the 4 litre kettle a
minimum of a litre should be
used. Do not fill above the MAX
mark indicated inside the kettle.
• Boil only as much water as you
need as this saves electricity.
2 Push the mains lead connector
firmly into the kettle.
3 Plug in and switch on at the wall
socket.
4 Switch the kettle on using the
on/off switch the indicator light
will illuminate.
5 When the water boils the kettle
will switch off automatically.
•To reset shortly after boiling you
will need to push the on/off
switch in and continue to push
until it starts to boil.
6 Carefully disconnect the mains
lead connector ensuring you hold
the kettle level.
•To re-boil, switch to 'ON' again. If
the kettle has just switched off
wait a minute or so before
switching it back on again.
•If you do not put in enough
water, or switch on the kettle
when it is empty, the safety cutout will switch off the power
automatically. If this happens,
refill and wait a few minutes for
the element to cool, then use as
normal.
A
⁄
⁄
¤
¤
‹
‹
›
›
fi
fl
fi
‡
77007 comm kettle Rev 1 18/1/05 11:33 AM Page 4
Loading...