Bunn-O-Matic TB3 Part Manual

TB3

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifications, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: [phone] FAX: [phone]

37237.0000D 02/08 ©2004 Bunn-O-Matic Corporation www.bunn.com

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as specified below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis:
parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by
it will be commercially free of defects in material and workmanship existing at the time of manufacture and
appearing within the applicable warranty period. This warranty does not apply to any equipment, component or
part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect,
alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is
conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone
at [phone] or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by
BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior
authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR
ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modifications to this warranty or to make additional warranties that are binding on
BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and
should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its
exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts
and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective
components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace
the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF
THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S
SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,
loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.

2

37237 080204

TABLE OF CONTENTS

Electrical and Operating Controls .............................................................................................................................................14

Funnel Assembly ...................................................................................................................................................................... 16

Numerical Index .......................................................................................................................................................................20

Strainer/Flow Control, Solenoids and Lines ................................................................................................................................8

Sweetner Solenoid & Lines ......................................................................................................................................................12

Tank Assembly ...........................................................................................................................................................................6

Top Cover, Hood, Trunk, Base and Panels ..................................................................................................................................4

3

37237 050205

BUNN

®

TOP COVER, HOOD, TRUNK, BASE AND PANELS

20 10 8

TB3

1

2

3

4

5

9

11

8

12

19

6

7

13 15 17

22 21

14 16

18

P3035.40

4

37237 021508

TOP COVER, HOOD, TRUNK, BASE AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 36355.1000 1 Cover, Top (Includes items 8, 10 & 20)(w/o Sweetner)

36355.1002 1 Cover, Top 100V (Includes items 8 & 20)

36355.1005 1 Cover, Top (Includes items 8, 10 & 20)(w/ Sweetner)

01308.0000 1 Screw, Truss Head #6-32 x .25”

2 36584.0001 1 Hood

02308.0000 8 Screw, Pan Head #8-32 x .38”

3 36586.0000 1 Gasket

4 36580.0001 1 Bezel

02308.0000 4 Screw, Pan Head #8-32 x .38”

01502.0000 4 Lockwasher, Split #10

5 36590.0000 1 Decal, Control Panel

36590.0001 1 Decal, Control Panel (Models w/Ready Light)

36590.0002 1 Decal, Control Panel (Models w/Sweetner)

36590.0007 1 Decal, Control Panel (100V models w/Half Batch)

6 39356.0000 1 Nozzle, Dilution

02332.0005 2 Screw, Hex #6 x .38”

7 36353.1007 1 Trunk 29.0” (Also order item 8)

36353.1008 1 Trunk 25.75” (Also order item 8)

02308.0000 6 Screw, Pan Head #8-32 x .38”

8 37881.0000 2 Decal, No Serviceable Parts

9 36356.1003 1 Panel, Back 29.0” (Also order items 8, 11 & 12)

36356.1004 1 Panel, Back 29.0” (Also order items 8, 11, 12, 21 & 22)

36356.1005 1 Panel, Back 25.75” (Also order items 8, 11 & 12)

01311.0001 6 Screw, Truss Head #8-32 x .25”

10 37234.0000 1 Electrical Schematic

27432.0000 1 Electrical Schematic (Models w/Sweetner)

37234.0004 1 Electrical Schematic (100V models w/Half Batch)

11 00831.0000 1 Decal, Warning - Electrical

12 00656.0000 1 Decal, Comply to Plumbing Code

13 36362.0000 1 Base (Early Models w/Trim)

36362.0001 1 Base (New Models w/o Trim)

14 25137.0001 4 Foot

15 36412.0000 1 Rail, Stop

00970.0000 2 Nut, Keps #8-32

16 36461.0000 1 Guide Rail, Left

00970.0000 2 Nut, Keps #8-32

17 36462.0000 1 Guide Rail, Right

00970.0000 2 Nut, Keps #8-32

18 36361.0000 1 Trim, Base Cover (Early Models)

01308.0002 2 Screw, Truss Head, Locking #6-32 x .25”

02332.0005 2 Screw, Hex #6 x .38”

19 01592.0001 1 Snap Bushing

20 32540.0000 1 Decal, Batch Set, Digital Timer (Brew Volume only)

21 26371.0000 1 Decal, Water Inlet (Models w/Sweetner)

22 26371.0001 1 Decal, Sweetner Inlet (Models w/Sweetner)

5

37237 091506

BUNN

®

TANK ASSEMBLY

4 16 6 17 7 8 18

TB3

9

5

12

13

14

3

2

1

15

10

11

P3036.75

6

37237 021808