Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specified below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts
and labor for 3 years or 30,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will
be commercially free of defects in material and workmanship existing at the time of manufacture and appearing
within the applicable warranty period. This warranty does not apply to any equipment, component or part that was
not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper
installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the
Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601
or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the
defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from
BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are
not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN.
Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not
be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its
exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/
or labor (during the applicable parts and labor warranty periods specified above) to repair the defective
components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace
the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF
THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S
SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,
loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.
2
29433 070102
TABLE OF CONTENTS
Electrical and Operating Controls ..............................................................................................................................................22
Numerical Index .......................................................................................................................................................................28
Reservoir, Gauge and Faucet (T3) .............................................................................................................................................. 8
Reservoir, Gauge and Faucet (T6) ............................................................................................................................................ 10
Strainer/Flow Control, Solenoids and Lines (T3) ...................................................................................................................... 14
Strainer/Flow Control, Solenoids and lines (T6) ....................................................................................................................... 18
Tank Assembly ......................................................................................................................................................................... 12
Top Cover, Hood, Trunk, Base and Panels (T3) ......................................................................................................................... 4
Top Cover, Hood, Trunk, Base and Panels (T6) ......................................................................................................................... 6
3
29433 071900
BUNN
15
12
®
TOP COVER, HOOD, TRUNK, BASE AND PANELS (T3)
T3 T6
19
1
2
3
4
13
14
5
6
7
8
9
11 16 10
P1755
4
29433 071900
TOP COVER, HOOD, TRUNK, BASE AND PANELS (T3)
ITEMPART NO.QTY.DESCRIPTION
103423.10001Cover, Top (Includes 10299.0000) (Also Order item 19)
03423.10021Cover, Top (Includes 10558.0000) (Also Order item 19)
03423.00001Cover, Top (“A” Models) (Also order item19)
01382.00004Screw, Truss Head #6-32 x .375"
210299.00001Schematic, Electrical 120V
10558.00001Schematic, Electrical 100V & 120V (Brewers with half batch option)
303381.00001Hood (Also order item 4)
03381.00051Hood (Brewers with ready light) (Also order item 4)
02308.00006Screw, Pan Head - Serrated #8-32 x .375"
403363.00001Decal, Hood-Switch
03363.00011Decal, Hood-Switch (Brewers with ready light)
03352.00001Decal, Hood-Switch (Brewers with half batch option)
03352.00011Decal, Hood-Switch (Brewers with ready light & half batch option)