Bunn-O-Matic Single SH General Manual

INTERNATIONAL
ITE M#
Single Soft Heat® Brewer with Docking System
Features
Coffee brewers with portable servers
• Variable batch selector allows you to brew 1⁄2, 1, or 11⁄2 gallon (1.9, 3.8, 5.7 litres) batches.
• Patented server heat control automatically shuts off once target temperature is reached. Can be set to 175º-190ºF (79.4º-87.8ºC).
• Electronic grinder interface communicates to grinder on exact amount of coffee for selected brew batch size.
• Holds one 5.7 litre SH server (sold separately).
Safety-Fresh® patented brew-through lid with vapor seal and spill prevention.
• Remote 1 or 2 server docking stations for additional satellite coffee serving. (sold separately)
• Brew capacity varies by model. See back for details.
PROJECT
DATE
Single SH with
SH Server
(server sold separately)
Dimensions: 35.8” H x 9.3” W x 20.0” D
(90.9cm H x 23.6cm W x 50.8cm D)
For current specification sheets and other information, go to www.bunn.com.
Related Products
Easy Clear® EQHP-10
Product No. : 39000.0004
Easy Clear® EQHP-10L
Product No. : 39000.0001
Product No. : 20138.0000
One Position Drip Tray
For use with Single/Single SH/1SH Stand Product No. : 26830.0000
International models may vary in appearance.
SH Server with 1SH Stand
Patents Apply
12/06
A2.6
Dimensions & Specifications
Model Product # Volts Amps Tank Heater Total Capacity Shipping Cord Agency Watts Watts Weight Attached
Single SH 27800.0006 230 13.7 3031 3150 8.7 gal./hr. 59 lbs. No (32.9 L/hr.) (26.8 kg) Single SH 27800.0014 230 13.7 3031 3100 8.7 gal./hr. 59 lbs. No (32.9 L/hr.) (26.8 kg) Single SH 27800.0021 220 12.7 3031 2800 8.7 gal./hr. 59 lbs. No (32.9 L/hr.) (26.8 kg)
Note: Soft Heat Brewers and Servers are sold, boxed and shipped separately. Brewing capacity: based upon incoming water temp of 60˚F/15.5˚C (140˚F/60˚C rise).
Electrical: 230 volt models require 2-wires plus ground service rated 220-240V, single phase, 50/60Hz. 220 volt models require 2-wires plus ground service rated 220-240V, single phase, 60Hz.
Plumbing: 20-90 psi (138-621 kPa). Machine supplied with
1
⁄4" male fitting.
BUNN Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in centimeters. Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.
Loading...