Bunn-O-Matic HC-2, HC-3 Part Manual

®

BUNN

DISCONTINUED VERSION

Parts listed in this catalog

may no longer be available.

HC-2 HC-3

(prior to S/N HC00025000)

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁcations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

www.bunnomatic.com

WARRANTY

Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects in material and workmanship existing at the time of manufacture and appearing within one year from the date of installation. In addition:

1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and

workmanship for three years from the date of installation.

2.) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material

and workmanship for two years from the date of installation.

3.) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory

screen sieve analysis for three years from date of installation or for 30,000 pounds of coffee, whichever comes first.

This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that, in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are

not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND.

In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

2

26531 021502

TABLE OF CONTENTS

Auger Drive and Hopper Assembly ................................................................................................................................................8

Covers, Panels and Drip Tray ......................................................................................................................................................... 4

Dispense Valves and Lines .......................................................................................................................................................... 18

Door, Lamps and Panels ................................................................................................................................................................ 6

Electrical Controls........................................................................................................................................................................ 20

Mixing/Whipper Chambers and Drive Motor ............................................................................................................................... 10

Numerical Index .......................................................................................................................................................................... 22

Strainer, Solenoid, Fill Valve and Lines ........................................................................................................................................ 14

Tank, Heater and Overflow Protection .......................................................................................................................................... 12

3

26531 060600

BUNN

®

COVERS, PANELS AND DRIP TRAY

HC-2 HC-3

1

2

3

24

4

5

23

10

9

17

18

19

6

7

8

N

O

I

T

U

A

C

!

ID

U

HOT

Q

I

L

11

12

22

13

14

15

16

22

20 21 22

P899

4

26531 060600

COVERS, PANELS AND DRIP TRAY

ITEM PART NO. QTY. DESCRIPTION

1 26504.0000 2 Hinge

02308.0000 8 Screw, Pan Head 8 - 32 x .375”

2 25796.0000 1 Cover, Top Rear (SST)

25796.0001 1 Cover, Top Rear (Black)

02331.0000 4 Screw, Truss Head 10 - 32 x .375” (SST)

02331.0001 4 Screw, Truss Head 10 - 32 x .375” (Black)

3 25901.0000 1 Cover, Top Front (SST)

25901.0001 1 Cover, Top Front (Black)

4- - - - - - - - 1 Panel W/Decals, Front (Not available)(Early Models without Hopper Delay)

- - - - - - - - 1 Panel W/Decals, Front (Not available)(Late Models with Hopper Delay)

02331.0000 2 Screw, Truss Head 10 - 32 x .375”

5 26532.0000 1 Schematic, 120 & 120/240V (Early Models without Hopper Delay)

26702.0000 1 Schematic, 120 & 120/240V (Late Models with Hopper Delay)

6 26524.0000 1 Decal, Tank Heater Switch

7 26523.0000 1 Decal, Rinse/Run Switch

8 26522.0000 1 Decal, Hot/Cold Switch

9 26232.0000 1 Cover, Right Side (SST)

26232.0001 1 Cover, Right Side (Black)

01311.0000 6 Screw, Truss Head 8 - 32 x .25”

10 25414.0000 1 Cover, Access (SST)

25414.0001 1 Cover, Access (Black)

01311.0000 2 Screw, Truss Head 8 - 32 x .25” (SST)

01311.0003 2 Screw, Truss Head 8 - 32 x .25” (Black)

11 26233.0000 1 Panel, Splash

01311.0000 4 Screw, Truss Head 8 - 32 x .25”

12 26749.0000 1 Plate W/Decals, Cup Stop (Includes item 13 & 2 of item 22 - also order item 14)

01311.0001 2 Screw, Truss Head 8 - 32 x .25” Locking

Also order item 24

13 12368.0001 1 Decal, Caution-Hot Liquid

14 26576.0000 1 Decal, Cup Placement (HC-3 Models) (Shown)

26576.0002 1 Decal, Cup Placement (HC-2 Models)

15 26509.0000 1 Cover, Drip Tray

16 26886.1000 1 Drip Tray Assy (Includes 4 of item 22)

17 26751.0000 1 Cover W/Decals, Rear & Bottom (Includes items 18 & 19)

18 00831.0000 1 Decal, Warning-Electrical

19 00656.0000 1 Decal, Comply to Plumbing Code

20 25887.0000 1 Cover, Left Side (SST)

25887.0001 1 Cover, Left Side (Black)

01311.0000 6 Screw, Truss Head 8 - 32 x .25”

21 26528.0000 4 Leg, 4.0” Adjustable (Also see item 25)

22 03996.0000 10 Pad, Rubber 1.25” Dia.

23 20621.0000 6 Plug, Hole .203” Dia.

24 27290.0000 1 Kit, Hopper Stabilizer

25 13255.0003 1 Kit, Leg 4.0” Adjustable (Includes 4 each of items 21 & 22) (Not illustrated)

5

26531 021502

BUNN

®

DOOR, LAMPS AND PANELS

HC-2 HC-3

15

22

18

1

17

11

2

3

6

7

8

16

4

"

SE

IN

S.

the "R

in

E TIP

itch

C

ursts.

N

sw

A

b

nt.

N

nd

TE

IN

eterge

seco

SE/RU

A

d

IN

M

ish

to 5

D

e R

N

f d

G A

s for 3

tion o

IN

N

lu

itche

EA

y placing th

E sw

rs b

in a so

S

Y CL

N

be

ct.

IL

u

ash

A

PE

am

D

IS

nd w

D

prod

E

e D

ith

D

per Ch

N

ray a

ip

E

h

M

ting th

W

rip T

M

O

®

C

pty D

E

R

m

out the

pers and

and activa

N

inse

op

1.E

N

2.R

U

ove H

position

m

B

EM

R

nce

(O .

1 .

2 .

3

4. .

5

.

6

7.

8.

ITATO

AG

ETA

R CLIP

A

LU F

he

(W

1.

2.

3.

4.

G

VIN

eek)

O

a w

n the

pe

ve

tim

o

O

e

em

R the sam

ull the M

C

P

g

ist the W

in

rother o

Tw

hipp

W

ll the F

Pu

ITATO

G

A

R DISK

G

ININ

DR

GER

U

ER D

G

AU

ESC

R

O

n lights flicker and are ha

pen the

ove th

O

em

te La

R

ota

R

sert new

In the pins snap in place.

N A

C the S ixing

IVE BR

N E

C e U m Lam

C

D

abinet D

te

e twisting it clockw

C hipp ham

R SU

ACKET

RIVE SHAFT

AUG

A T L

abinet D

ppe

0° a

9

p

3.Re

R

IPPE

H

E W

TH

NING

A

it forw

LE

y pulling

hipping

ise.

W

oor. collector b

ckwise an

am

ber out of the

ber clo

cle.

haft. Notice

ham

C

g

ecepta

in

otor S ber R ff the M

D

O

T R

PPOR

ER

ELBOW

T

EN

M

ECTOR

E

EJ

C A L

P E

rd to start)

R P

M

l.

e

Lam

turn 9

the

r Pan

oo

from

oor.

ve

o

olders and

H

r Inner D

p

d rem

n

p into Lam

5

6

7

8

TOR

refill w

LLEC

ER

O

B

M

M C

HA

C

STEA

ING

IX

M

S

ER

B

M

A

H

C

d at

ard an

ber.

ham

ff the

C

y-

d pull it o

t ke

e fla

th

BER

HAM

C

PER

THER

S

IP

G

H

RO

F

ER

W

id.

-RIN

PP

nts.

O

t L

O

te

E H

bine

ver.

a

con

H

d

T

o

F

r Co

op C

pe

pty the

G O

ort R

e T

m

op

IN

pp

th

N

t; e

A

r su

ine

LE

d raise

ve the H

C

o

gitato

H

ing

a

G

the cab

per.

rem

k)

U

oor an

ng

d

m

etain

O

lli

op

ee

t D

R

an

f H

OR

r fro

ine

y pu

ow

t o

ving

TH

ab

o

nce a w

oppe

C

isk b

H

(O

ut fron

ctor Elb

n the

je

it o

ft by rem

itator D

pe

E

ve the

a

isk.

e

o

O

Ag

lling

Sh

em

ff th

1.

tor D

R

y pu

ll o

ita

ve the

2.

o

Pu

r Drive

ge

em

uger b

3.

R

ards Ag

Au

w

ve A

4.

o

to

em

ve the

o

R

em

5.

R

6.

7. P

M

A

R

L

8.

E

LD

ER

HO

P

EL

R INN

AM

L

PAN

PPE

R

U

OO

D

olders.

ntil

p H

° u

0

9 10 11 12 14 13

6

P900

26531 060600

DOOR, LAMPS AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 26752.0000 1 Door W/Decal (SST)(Includes Item 3 - also order item 2)

26752.0001 1 Door W/Decal (Black)(Includes Item 3 - also order item 2)

27307.0000 1 Door W/Decal (SST)(Includes Item 3 - also order item 2)

27307.0001 1 Door W/Decal (Black)(Includes Item 3 - also order item 2)

27307.0002 1 Door W/Decal (Black Coated)(Includes Item 3 - also order item 2)

2 26525.0000 1 Decal, Door Front (HC-3 Models) (Shown)

26525.0002 1 Decal, Door Front (HC-2 Models)

3 11646.0000 1 Decal, Caution Hot Liquids

4 25898.0000 1 Latch (Early Models)

25899.0000 1 Latch, Magnetic Snap-in (Late Models)

5 26444.0000 2 Bushing, Strain Relief

6 26353.0000 2 Bracket, Lamp

02308.0000 4 Screw, Pan Head #8 - 32 x .375"

7 26239.0000 2 Lamp, Fluorescent - 8 Watts

8 26539.0000 4 Lamp Holder, Fluorescent

02361.0000 8 Screw, Pan Head #4 - 40 x .25"

9 26520.0000 1 Display, Graphics (Cafe Scene)

26520.0001 1 Display, Graphics (Fireside Scene)

Early Models

Late Models

10 26348.0000 2 Window

11 26354.0000 2 Clamp, Window

02308.0000 4 Screw, Pan Head #8 - 32 x .375"

12 26753.0000 1 Cover W/Decal, Door - Upper (Includes item 13)

01311.0000 8 Screw, Truss Head #8 - 32 x .25"

13 26521.0000 1 Decal, Cleaning

14 27520.1000 1 Cover, Door - Bottom

01311.0000 6 Screw, Truss Head #8 - 32 x .25"

15 25897.0000 2 Hinge, Door (Early Models)

27296.0000 2 Hinge, Door (Late Models)

02331.0000 8 Screw, Truss Head #10 - 32 x .375" (Early Models)

02330.0001 8 Screw, Truss Head #10 - 32 x .375" (Late Models)

16 05920.0000 2 Clamp, Cable

17 00619.0010 4 Plug, Hole .438" Dia.

18 26892.0000 1 Plate, Strain Relief

19 26507.0000 1 Wiring Harness, Door Interconnect (Includes item 18 & 1 of item 5)

20 26506.0000 1 Wiring Harness, Door

Not illust.

21 26537.0000 1 Decal, Flavors

22 27295.0000 1 Handle, Snap-in (Late Models)

7

26531 060600