Bunn-O-Matic G9WD-RH General Manual

ITE M#

Low Profile Portion Control Grinder with 1 Hopper

Features

Portion Control Grinder

• Just 8.64” (21.95 cm) wide and a low proﬁle height of 15.1” (38.4 cm).

• Professional grind provided by large 3.19” (8.1 cm) diameter burrs.

• Powered by quiet, high torque motor.

• Large, clear bean hopper merchandises 6 lbs. (2.72 kg) of fresh coffee beans.

• Easy access on back for grind weight adjustment.

• Three-year warranty on grinding burrs.

• International electrical conﬁgurations available.

PROJECT

DATE

Model LPG

Dimensions: 15.1” H x 8.64” W x 10” D

For current speciﬁcation sheets and other information, go to www.bunn.com.

(funnel not included)

(38.4cm H x 21.95cm W x 25.4cm D)

Related Products

Precision Burrs

All BUNN grinders use precision burrs to cut (not crush) the coffee beans and deliver consistent grind distribution. BUNN burrs are rated at a Rockwell hardness of 66C, resulting in an exceptionally long burr life.

Standard Grind Burr Set

Product No: 05861.1002

Fine Grind Burr Set

Product No: 11285.1000

Fine Grind Dechaffer Kit

Product No: 43724.0000

Standard Dechaffer (2 required)

Product No: 20588.0000

Model Agency Listing

LPG

LISTED

9/10

C1.4

Dimensions & Speciﬁcations

Model Product # Volts Amps Total Watts Capacity Cu. Ft. Shipping Weight Cord Attached

LPG 20580.0001 120 3 360 6 lbs. 2.2 ft3 23 lbs. Yes*

*Power cord (NEMA 5-15P) 15 Amp-120V machine only.

Electrical: Model requires 2-wires plus ground service rated 120V, single phase, 60 Hz.

Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springﬁeld, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com

BUNN® practices continuous product research and improvement. We reserve the right to change speciﬁcations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

All dimensions shown in inches.