HIGH PERFORMANCE WATER C ONDI TION ING SYSTE MS
ITE M#
Complete Store
Water Quality Systems
Features
70,000 Gallon Water Quality System
Water filtration system for high flow-rate and capacity environments
• System includes a two-cartridge manifold with built-in pressure gauge, inlet
water shut off valve, outlet check valve, mounting brackets and two EQHP-35L
cartridges.
• Consistent great-tasting beverages and ice from water with reduced sediment
and chlorine taste and odor.
• Incorporates multi-zone pharmaceutical grade pleated nylon pre-filter.
• Pre-filter offers exceptional sediment holding capacity and particle reduction to
0.2 microns.
• Equipment protection from reduced sediment particles that can clog the
sprayhead.
• NSF Standard 42 and/or FDA CFR-21 compliance provides assurance of
safety.
• Certified by NSF to Standard 53 for cyst reduction.
• Built-in scale inhibitor reduces lime scale build-up as tested by the
manufacturer.
• Quick Connect Head uses encapsulated cartridge design allowing for fast and
easy change-outs with a 1/4 turn while minimizing the possibility of leakage
Model EQHP-TWIN 70L
Water Quality System
and contamination.
• Auxiliary inlet gauge port allows optional monitoring of differential water
pressure.
• Filter cartridges incorporate carbon block media and require no pre-activiation
• 3/4” NPT horizontal inlet and outlet ports allow direct or easily adaptable
connections to existing plumbing lines.
• 70,000 gallon capacity based on system’s chlorine reduction rating.
PROJECT
DATE
For current specification sheets and other information, go to www.bunn.com.
Related Products
Replacement Cartridge
EQHP-35LCRTG
Product No.: 39000.1011
Twin Manifold
EQHP-Twin
Product No.: 39000.0105
Model Agency Listing
EQHP-TWIN70L
7/10
F16
Dimensions & Specifications
Model Product #
Service Flow
Rate & Capacity
Micron
Rating Application
High Volume
39000.0012 EQHPTWIN70L
6.68
gpm/70,000
0.2 Complete store system needing 70,000 gallon usage per 6 months.
Gallons
Note: Inlet and outlet plumbing connections are 3/4” NPT.
System maximum operating pressure is 125 psi (862 kPa) and operating temperature 100˚F (38˚C).
16 7/8"
INLET 3/4" N PT
OUTLET 3 /4" NPT
5 3/8"
VENT VAL VE
3/8" TUBE
18 1/16 "
2 5/16" MI NIMUM
DISTANCE R EQUIRED
TO REMOV E CARTRIDGE
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
7/10 © Bunn-O-Matic Corporation