Bunn-O-Matic DUAL SH 1.50 GALLON, DUAL SH 1.75 GALLON Part Manual

FUNNEL CONTENTS ARE HOT

FAILURE TO COMPLY RISKS INJURY

PN: 658

DUAL

1.50 & 1.75 GALLON

HOT WATER

CAUTION

DISCARD DECANTER IF:

. CRACKED . SCRATCHED . BOILED DRY . HEATED WHEN EMPTY . USED ON HIGH FLAME . OR EXPOSED ELECTRIC ELEMENTS

1985 BUNN-O-MATIC CORPORATION

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁcations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as speciﬁed below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes ﬁrst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, PowerLogic, Quality Beverage Equipment Worldwide, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, 392, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Proﬁt Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Proﬁts, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Signature Series, Tea At Its Best, Phase Brew, The Horizontal Red Line, Titan, trifecta, Ultra, Velocity Brew are either trademarks or registered trademarks of Bunn-O-Matic Corporation.

28220 041410

TABLE OF CONTENTS

Base - Trunk - Hood - Covers & Panels ...................................................................................................................................... 4

Digital Brewer Control Assembly .............................................................................................................................................. 10

Dispense Valve and Sprayhead ................................................................................................................................................. 22

Electrical Controls & Ready Light ............................................................................................................................................. 28

Faucet (Without Tube Warmer) ................................................................................................................................................. 24

Faucet (With Tube Warmer) ...................................................................................................................................................... 26

Funnel....................................................................................................................................................................................... 34

Numerical Index .......................................................................................................................................................................36

Strainer/Flow Control - Solenoid & Lines .................................................................................................................................16

Tank and Mounting Brackets ....................................................................................................................................................14

Tank Heater & Overﬂow Protection Devices ............................................................................................................................. 12

Triple Set Timers & Thermostat .................................................................................................................................................. 8

Water By-Pass .......................................................................................................................................................................... 20

28220 040207

BASE - TRUNK - HOOD - COVERS & PANELS

DUAL SH

1.50 & 1.75 GAL

1 3

1 2 3

Brewers W/Panel Guard

Early Models

DRIP TRAY KIT

P1359

28220 061109

BASE - TRUNK - HOOD - COVERS & PANELS

ITEM PART NO. QTY. DESCRIPTION

1 25376.0000 1 Cover Assy, Top SST (Includes items 2 & 3)

25376.0002 1 Cover Assy, Top BLK (Includes items 2 & 3)

25376.0001 1 Cover Assy, Top SST (Includes items 2 & 3) (DBC)

20921.1004 1 Cover Assy, Top (Includes item 2 & 3) (Brewers W/Panel Guard)

02336.0000 4 Screw, Truss Head #4 - 40 x .38"

2 37881.0000 2 Decal, Warning “No Serviceable Parts”

3 25151.0000 2 Shield, Insulator

4 00916.0000 4 Clip, J-Type #4-40

5 26303.0002 1 Hood W/Decals SST (Includes items 6 & 7) (1.75 Gallon Models)

26303.0003 1 Hood W/Decals SST (Includes items 6 & 7) (1.50 Gallon Models)

26303.0004 1 Hood W/Decals BLK (Includes items 6 & 7) (1.50 Gallon Models)

26848.1002 1 Hood W/Decals SST (Includes item 6) (230V models)

02308.0000 16 Screw, Pan Head #8 - 32 x .375"

6 20966.0009 1 Decal, Control Panel (1.75 Gallon Models) (2 Ready Lights)

20966.0023 1 Decal, Control Panel (1.75 Gallon Models) (1 Ready Light)

28192.0000 1 Decal, Control Panel (2 Ready Lights with Faucet)

28192.0003 1 Decal, Control Panel (2 Ready Lights without Faucet)

28192.0007 1 Decal, Control Panel (1 Ready Light with Faucet)

28192.0010 1 Decal, Control Panel (1 Ready Light without Faucet)

28192.0001 1 Decal, Control Panel (230V) (2 Ready Lights with Faucet)

28192.0002 1 Decal, Control Panel (230V) (2 Ready Lights without Faucet)

28192.0008 1 Decal, Control Panel (230V) (1 Ready Light with Faucet)

28192.0009 1 Decal, Control Panel (230V) (1 Ready Light without Faucet)

7 20201.5600 1 Decal, Caution Hot Water (Early models)

8 26835.1000 1 Trunk W/Decals SST (Includes item 9 & 10)

26835.1001 1 Trunk W/Decals BLK (Includes item 9 & 10)

9 00831.0000 1 Decal, Warning - Electrical

10 00656.0001 1 Decal, Comply to Plumbing Code

11 28221.0000 1 Panel W/Decals, Trunk SST (Includes items 2, 12, & 13)

28221.0001 1 Panel W/Decals, Trunk BLK (Includes items 2, 12, & 13)

01382.0003 11 Screw, Truss Head #6 - 32 x .375"

12 28218.0000 1 Schematic (120/208V) (Prior to S.N.DUAL026000)

29331.0000 1 Schematic (120/208V) (DBC)

28218.0003 1 Schematic (120/208V) (After S.N. DUAL026000)

13 00658.0000 1 Decal, Caution - Decanter/Funnel

14 26840.1000 1 Base Housing SST (120/208V & 120/240V)

26840.0001 1 Base Housing (230V)

26840.1002 1 Base Housing BLK (120/208V & 120/240V)

26840.1004 1 Base Housing (230V)(Models W/Lower Faucet & Tank Drain)

26840.1005 1 Base Housing SST 120/208V & 120/240V (Includes item 7)

26840.1007 1 Base Housing BLK 120/208V & 120/240V (Includes item 7)

35334.0002 1 Base Housing SST 230V

02308.0000 8 Screw, Pan Head #8 - 32 x .375"

Models with welded server stops

Models with removable server stops

(continued)

28220 050710

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

BASE - TRUNK - HOOD - COVERS & PANELS

DUAL SH

1.50 & 1.75 GAL

1 3

1 2 3

Brewers W/Panel Guard

Early Models

DRIP TRAY KIT

P1359

28220 061109

BASE - TRUNK - HOOD - COVERS & PANELS

ITEM PART NO. QTY. DESCRIPTION

15 38936.0000 1 Cover, Bottom (Also see item 35)

38936.0007 1 Cover, Bottom (Models with Main Power Switch)

38936.0001 1 Cover, Bottom (Black Decor) (Also see item 35)

38936.0009 1 Cover, Bottom (Black Decor) (Models with Main Power Switch)

38936.0003 1 Cover, Bottom (3 Phase models) (Also see item 35)

27765.0003 1 Cover, Bottom (Models with Tank Drain) (Early models)

02308.0000 15 Screw, Pan Head #8 - 32 x .375"

16 26528.0000 4 Leg 4.0" Plastic

17 03996.0000 4 Pad, Anti Skid

18 27760.0000 1 Cover, Server Platform SST

27760.0001 1 Cover, Server Platform BLK

27760.0002 1 Cover, Server Platform SST

27760.0004 1 Cover, Server Platform BLK

01382.0003 4 Screw, Truss Head #6 - 32 x .375"

19 12249.0001 3 Guide Rail

00970.0000 6 Nut, Keps #8 - 32

20 26949.0000 2 Bracket, Tank Supporting

21 26916.0000 1 Wire Grill, Drip Tray

22 26971.1000 1 Drip Tray W/Pads (Includes item 23)

23 11591.0000 4 Pad, Adhesive 1.0" Dia.

24 27150.0000 1 Drip Tray Kit (Includes items 21, 22 & 23) (Optional on 1.5 Gallon Models)

25 00619.0007 1 Plug, .50" Hole

00669.0002 1 Plug, .50" Hole (Black Decor models)

26 32540.0000 1 Decal, Timer Setting Instruction

See item 34

Early Models

Late Models

27 22306.0001 1 Decal, Red Decor Stripe (Black Decor models only)

28 21537.0001 2 Plate, Server Stop

21537.0003 2 Plate, Server Stop (Black Decor models)

01347.0000 4 Screw, Truss Head #6-32 x .375"

01347.0002 4 Screw, Truss Head BLK #6-32 x .375"

29 26504.0000 2 Hinge, Panel Guard

01382.0003 8 Screw, Truss Head W/Nylon Patch #6-32 x .375"

30 29384.0000 1 Bracket, Hinge Support

31 32323.0001 1 Guard, Panel

32 36398.0000 1 Plug, Hole DB-9 (Early models)

33 39803.0000 1 Decal, Main Switch (Models with Main Power Switch only)

34 13255.0003 - Leg Kit (Includes 4 each of items 16 & 17) (Not illustrated)

35 38936.1001 1 Bottom Cover Kit, BLK

38936.1005 1 Bottom Cover Kit, SST

Includes necessary components to relocate the Transformers

Late Models only

Brewers W/Panel Guard only

28220 102008

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

TRIPLE SET TIMERS & THERMOSTAT

DUAL SH

1.50 & 1.75 GAL

1.5

MINUTES

P/N 24486-0000 120 VAC

BUNN-O-MATIC

2.5

MINUTES

FIRST TYPE

1.5

MINUTES

P/N 24486-0000 120 VAC

BUNN-O-MATIC

2.5

MINUTES

TL5

TL4

TL3

TL2

TL1

TL5

TL4

TL3

TL2

TL1

SET

S ET

LOCK

SET

LOCK

Replacement

Part

P1041.90

28220 062200

TRIPLE SET TIMERS & THERMOSTAT

ITEM PART NO. QTY. DESCRIPTION

1 20948.0000 1 Bracket, Component Mounting (Used with Tripple Timer)

20948.0001 1 Bracket, Component Mounting (Used with Digital Timer)

02308.0000 4 Screw, Pan Head #8 - 32 x .375”

2 01533.0000 4 Spacer, Nylon .375”

3 - - - - - - - - 2 Timer, Triple (120/208V & 120/240V Models)(No Longer Available. Order Item 9)

- - - - - - - - 2 Timer, Triple (200V & 240V Models) (No Longer Available. Order Item 10)

32400.0002 2 Timer, Digital 120V

32400.0003 2 Timer, Digital 240V

01347.0000 4 Screw, Truss Head #6 - 32 x .375” (Not used with Digital Timer)

01510.0000 4 Lockwasher, External Tooth #6

01388.0000 4 Screw, Truss Head #6 - 32 x .75”

12919.0008 2 Cap, Terminal (Not illustrated)

4 04314.0007 1 Thermostat Kit 120V (Mechanical)

02308.0000 1 Screw, Pan Head #8-32 x .375” (Mounting)

20762.0000 2 Screw, Binding Head #8-32 x .250” (Terminals)

5 07073.0000 1 Grommet, Thermostat

6 00720.0000 1 Knob, Thermostat

7 07074.1033 1 Control Board, Level 120V

07074.1028 1 Control Board, Level 230V

02308.0000 2 Screw, Pan Head #8 - 32 x .375”

01511.0000 2 Lockwasher, External Tooth #8

8 28377.0000 1 Noise Suppresor (Not used with Digital Timer)

9 32400.0000 1 Timer Kit, Digital 120V (with Adapter)

10 32400.0001 1 Timer Kit, Digital 240V (with Adapter)

28220 061209

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

DIGITAL BREWER CONTROL ASSEMBLY

1 2 3

DUAL SH

1.50 & 1.75 GAL

P1087

28220 050800

DIGITAL BREWER CONTROL ASSEMBLY

ITEM PART NO. QTY. DESCRIPTION

1 25648.0000 1 Bracket, Mounting

00970.0000 2 Nut, Keps #8 - 32

2 25654.0000 1 DBC Display Assembly

02328.0003 2 Screw, Pan Head #6 - 32 x .312”

3 07075.0000 1 Grommet, Silicone .437” I.D.

4 12568.0003 1 Sensor, Temperature

5 26263.0000 1 Clamp, Steel .12”/.19”

01382.0000 1 Screw, Truss Head #6 - 32 x .375”

00973.0000 1 Nut, Keps #6 - 32

6 01667.0000 1 Terminal, .25”

7 12570.0000 1 Grommet, Temp. Sensor

8 20948.0001 1 Bracket, Component Mounting

02308.0000 4 Screw, Pan Head #8 - 32 x .375”

9 25468.0002 1 DBC Power Board Assembly (Includes item 10)

02308.0000 2 Screw, Pan Head #8 - 32 x .375”

10 27035.0000 1 Fuse, AGC 5 AMP 250V

11 25513.0000 1 Receptacle, Display

01388.0000 2 Screw, Truss Head #6 - 32 x .75”

00973.0000 2 Nut, Keps #6 - 32

12 01533.0000 2 Spacer, Nylon .375”

13 07441.0000 1 Bracket, Mounting

01347.0000 2 Screw, Truss #6 - 32 x .375”

00973.0000 2 Nut, Keps #6 - 32

14 25662.0000 1 Cord Assembly, Display 12.0” (Not illustrated)

28220 110501

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

TANK HEATER & OVERFLOW PROTECTION DEVICES

4 5 6 1 7 8 9 18 10

DUAL SH

1.50 & 1.75 GAL

P1042

28220 051109

+ 25 hidden pages

Bunn-O-Matic DUAL SH 1.50 GALLON, DUAL SH 1.75 GALLON Part Manual

Specifications and Main Features

Frequently Asked Questions

User Manual