Bunn-O-Matic DUAL SH-1.50 Part Manual
™
CAUTION
DISCARD DECANTER
IF:
. CRACKED
. SCRATCHED
. BOILED DRY
. HEATED WHEN EMPTY
. USED ON HIGH FLAME
. OR EXPOSED ELECTRIC
ELEMENTS
FAILURE TO COMPLY RISKS INJURY
PN: 658
1985 BUNN-O-MATIC CORPORATION
FUNNEL CONTENTS
ARE HOT
DUAL
1.50 & 1.75 GALLON
E
C
R
G
R
O
U
T!
L
O
N
E
E
S
NIN
N
R
AN
E
P
PO
W
Y
AR
M
O
N
O
P
W
C
F A
M
Y
!
O
N
L O
R
A
F A
V
T F
O
O
C
T
E
N
EM
N
E
N
R
O
E
EM
C
R
C
O
IS
F
D
LA
E
B
EP
R
WATER
HOT
ON
CAUTI
!
CAUTION
DISCARD DECANTER
!
IF:
. CRACKED
IC
HEN EMPTY
. SCRATCHED
W
H FLAME
. BOILED DRY
ELECTR
EATED
ON HIG
. H
. USED
. OR EXPOSED
ION
ELEMENTS
PORAT
IC COR
1985 BUNN-O-MAT
FUNNEL CONTENTS
ARE HOT
FAILURE TO COMPLY RISKS INJURY
PN: 658
SH
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
28220.0000 07/03 ©1997 Bunn-O-Matic Corporation
www.bunnomatic.com
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specified below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis:
parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it
will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing
within the applicable warranty period. This warranty does not apply to any equipment, component or part that
was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration,
improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned
on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217)
529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN,
shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior
authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN
are not authorized to make modifications to this warranty or to make additional warranties that are binding on
BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and
should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its
exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts
and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective
components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace
the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE
OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S
SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,
loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.
2
28220 070102
TABLE OF CONTENTS
Base - Trunk - Hood - Covers & Panels ..................................................................................................................................... 5
Digital Brewer Control Assembly..............................................................................................................................................11
Dispense Valve and Sprayhead ................................................................................................................................................ 23
Electrical Controls & Ready Light.............................................................................................................................................29
Faucet (First Type) ................................................................................................................................................................... 25
Faucet (Second Type) .............................................................................................................................................................. 27
Funnel ...................................................................................................................................................................................... 35
Numerical Index .......................................................................................................................................................................36
Strainer/Flow Control - Solenoid & Lines .................................................................................................................................17
Tank and Mounting Brackets....................................................................................................................................................15
Tank Heater & Overflow Protection Devices ............................................................................................................................. 13
Triple Set Timers & Thermostat .................................................................................................................................................9
Water By-Pass ......................................................................................................................................................................... 21
3
28220 071502
BUNN
®
BASE - TRUNK - HOOD - COVERS & PANELS
DUAL SH
1.50 & 1.75 GAL
20
13
2
12 3
WAR
!
CONNECT FROM POWER SOURCE
DIS
BEFORE REMOVAL OF ANY PANEL OR
REPLACEMENT OF ANY CO
G
NIN
MPONENT!
29
30
31
Brewers W/Panel Guard
4
5
6
7
28
9
8
10
19
18
14
15
16
17
11
12
26
13
21
25
22
23
DRIP TRAY KIT
P1359.25
4
28220 081301
BASE - TRUNK - HOOD - COVERS & PANELS
ITEM PART NO. QTY. DESCRIPTION
1 25376.0000 1 Cover Assy, Top (Includes item 2 & 3)
25376.0001 1 Cover Assy, Top (Includes item 2 & 3) (DBC)
20921.1004 1 Cover Assy, Top (Includes item 2 & 3) (Brewers W/Panel Guard)
02336.0000 4 Screw, Truss Head #4 - 40 x .38"
2 10044.0000 1 Decal, Warning “Shut Off Power”
3 25151.0000 2 Shield, Insulator
4 00916.0000 4 Clip, J-Type #4-40
5 26303.0002 1 Hood W/Decals (Includes items 6 & 7) (1.75 Gallon Models)(120V)
26303.0003 1 Hood W/Decals (Includes items 6 & 7) (1.50 Gallon Models)(120V)
26303.0004 1 Hood W/Decals (Includes items 6 & 7) (1.50 Gallon Models)(230V)
02308.0000 16 Screw, Pan Head #8 - 32 x .375"
6 20966.0009 1 Decal, Control Panel (1.75 Gallon Models)(120V)
28192.0000 1 Decal, Control Panel (1.50 Gallon Models)(120V)
28192.0001 1 Decal, Control Panel (1.50 Gallon Models)(230V)
28192.0002 1 Decal, Control Panel (1.50 Gallon Models)(230V)(Models with no Upper Faucet)
28192.0003 1 Decal, Control Panel (1.50 Gallon Models)(Models without Faucet)
7 20201.5600 1 Decal, Caution Hot Water
8 26835.1000 1 Trunk W/Decals (Includes item 9 & 10)
26835.1001 1 Trunk W/Decals (Includes item 9 & 10) (Black Decor)
9 00831.0000 1 Decal, Warning - Electrical
10 00656.0000 1 Decal, Comply to Plumbing Code
11 28221.0000 1 Panel W/Decals, Trunk (Includes items 12, & 13)
28221.0001 1 Panel W/Decals, Trunk (Includes items 12, & 13) (Black Decor)
01382.0003 11 Screw, Truss Head #6 - 32 x .375"
12 28218.0000 1 Schematic (120/208V) (Prior to S.N.DUAL026000)
29331.0000 1 Schematic (120/208V) (DBC)
28218.0003 1 Schematic (120/208V) (After S.N. DUAL026000)
13 00658.0000 1 Decal, Caution - Decanter/Funnel
14 26840.0000 1 Base Housing (120V)
26840.0001 1 Base Housing (230V)
26840.0004 1 Base Housing (230V)(Models with Lower Faucet & Tank Drain)
26840.0002 1 Base Housing (Black Decor)(120V)
02308.0000 8 Screw, Pan Head #8 - 32 x .375"
15 27765.0000 1 Cover, Bottom
27765.0001 1 Cover, Bottom (Black Decor)
27765.0003 1 Cover, Bottom (Models with Tank Drain)
02308.0000 15 Screw, Pan Head #8 - 32 x .375"
16 26528.0000 4 Leg 4.0" Plastic
17 03996.0000 4 Pad, Anti Skid
(continued)
5
See item 27
28220 071502
BUNN
2
20
®
BASE - TRUNK - HOOD - COVERS & PANELS
(continued)
13
12 3
ARN
W
!
DISCONNECT FROM POWER SOURCE
BEFORE REMOVAL OF ANY PANEL OR
REPLACEMENT OF ANY COMPONENT!
G
IN
Brewers W/Panel Guard
DUAL SH
1.50 & 1.75 GAL
29
30
31
4
5
6
10
19
18
14
15
7
28
9
8
11
12
26
13
21
16
17
25
22
23
DRIP TRAY KIT
6
P1359.25
28220 081301
BASE - TRUNK - HOOD - COVERS & PANELS
ITEM PART NO. QTY. DESCRIPTION
18 27760.0000 1 Cover, Server Platform
27760.0001 1 Cover, Server Platform (Black Decor)
01382.0003 4 Screw, Truss Head #6 - 32 x .375"
19 12249.0001 3 Guide Rail
00970.0000 6 Nut, Keps #8 - 32
20 26949.0000 2 Bracket, Tank Supporting
21 26916.0000 1 Wire Grill, Drip Tray
22 26971.1000 1 Drip Tray W/Pads (Includes item 23)
23 11591.0000 4 Pad, Adhesive 1.0" Dia.
24 27150.0000 1 Drip Tray Kit (Includes items 21, 22 & 23) (Optional on 1.5 Gallon Models)
25 00619.0007 1 Plug, .50" Hole
00669.0002 1 Plug, .50" Hole (Black Decor)
26 32540.0000 1 Decal, Timer Setting Instruction
27 13255.0003 - Leg Kit (Includes 4 each of items 16 & 17) (Not illustrated)
28 22306.0001 1 Decal, Red Decor Stripe (Black models only)
29 26504.0000 2 Hinge, Panel Guard
01382.0003 8 Screw, Truss Head W/Nylon Patch #6-32 x .375"
30 29384.0000 1 Bracket, Hinge Support
31 32323.0001 1 Guard, Panel
Brewers W/Panel
Guard only
7
28220 071502
BUNN
2
1.5
1
3
.5
MINUTES
P/N 24486-0000 120 VAC
3
BUNN-O-MATIC
3
2
2.5
1
MINUTES
®
5
4
3
4
5
2
1
6
TES
MINU
6
7
8
1
.5
FIRST TYPE
BUNN-O-MATIC
3
2
2
2.5
1.5
1
3
MINUTES
MINUTES
P/N 24486-0000 120 VAC
TRIPLE SET TIMERS & THERMOSTAT
5
6
4
7
3
4
8
5
2
S
1
6
MINUTE
DUAL SH
1.50 & 1.75 GAL
1
2
3
5
Replacement
Part
TL5
TL4
TL3
TL2
TL1
TL5
TL4
TL3
TL2
TL1
J
1
J
2
SET
S
E
T
L
LOCK
O
C
K
J
1
J2
SET
S
E
T
LOCK
LO
C
K
4
7
6
8
P1041.90
8
28220 062200
TRIPLE SET TIMERS & THERMOSTAT
ITEM PART NO. QTY. DESCRIPTION
1 20948.0001 1 Bracket, Component Mounting
02308.0000 4 Screw, Pan Head #8 - 32 x .375"
2 01533.0000 4 Spacer, Nylon .375"
3 24486.1000 2 Timer, Triple 120V (First Type)
32400.0002 2 Timer, Digital 120V (Second Type)
32400.0003 2 Timer, Digital 230V
01347.0000 4 Screw, Truss Head #6 - 32 x .375" (Not used with Digital Timer)
01510.0000 4 Lockwasher, External Tooth #6
01388.0000 4 Screw, Truss Head #6 - 32 x .75"
12919.0008 2 Cap, Terminal (Not illustrated)
4 04314.0001 1 Thermostat Kit 120V (Mechanical)
02308.0000 1 Screw, Pan Head #8-32 x .375" (Mounting)
20762.0000 2 Screw, Binding Head #8-32 x .250" (Terminals)
5 07073.0000 1 Grommet, Thermostat
6 00720.0000 1 Knob, Thermostat
7 07074.1026 1 Control Board, Level 120V
07074.1027 1 Control Board, Level 230V
02308.0000 2 Screw, Pan Head #8 - 32 x .375"
01511.0000 2 Lockwasher, External Tooth #8
8 28377.0000 1 Noise Suppresor (Not used with Digital Timer)
9
28220 071502
BUNN
®
DIGITAL BREWER CONTROL ASSEMBLY
123
DUAL SH
1.50 & 1.75 GAL
4
5
11
12
13
®
Digital Brewer Control
BUNN
Covered under Patent 5,375,508. One or more other patents may be pending.
er S
t
Hea
CAUTION
k
Is
)
an
!
(s
T
k
an
Turn
r T
te
a
OT
W
N
O
til
n
D
" U
N
O
"
Tank Heater Switch Off On
6
7
8
WARNING
!
HAZARDOUS
VOLTAGE
DISCONNECT FROM
POWER SOURCE
ch
it
BEFORE REMOVING!
w
Full!
e
/Ar
↔
9
10
10
P1087
28220 050800
DIGITAL BREWER CONTROL ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 25648.0000 1 Bracket, Mounting
00970.0000 2 Nut, Keps #8 - 32
2 25654.0000 1 DBC Display Assembly
02328.0003 2 Screw, Pan Head #6 - 32 x .312"
3 07075.0000 1 Grommet, Silicone .437" I.D.
4 12568.0003 1 Sensor, Temperature
5 26263.0000 1 Clamp, Steel .12"/.19"
01382.0000 1 Screw, Truss Head #6 - 32 x .375"
00973.0000 1 Nut, Keps #6 - 32
6 01667.0000 1 Terminal, .25"
7 12570.0000 1 Grommet, Temp. Sensor
8 20948.0001 1 Bracket, Component Mounting
02308.0000 4 Screw, Pan Head #8 - 32 x .375"
9 25468.0002 1 DBC Power Board Assembly (Includes item 10)
02308.0000 2 Screw, Pan Head #8 - 32 x .375"
10 27035.0000 1 Fuse, AGC 5 AMP 250V
11 25513.0000 1 Receptacle, Display
01388.0000 2 Screw, Truss Head #6 - 32 x .75"
00973.0000 2 Nut, Keps #6 - 32
12 01533.0000 2 Spacer, Nylon .375"
13 07441.0000 1 Bracket, Mounting
01347.0000 2 Screw, Truss #6 - 32 x .375"
00973.0000 2 Nut, Keps #6 - 32
14 25662.0000 1 Cord Assembly, Display 12.0" (Not illustrated)
11
28220 110501
BUNN
®
4 5 6 1 7 8 9 18 10
3
2
TANK HEATER & OVERFLOW PROTECTION DEVICES
DUAL SH
1.50 & 1.75 GAL
7
8
11
2
14
13
12
15
16
17
22
23
16
19
21
2
P1042
12
28220 050800
Loading...