BUNN
®
CWTF APS Brewing Instructions
BUNN® filter into the
funnel.
4. Slide funnel into the funnel rails
of the brewer.
2. Pour in fresh coffee.1. Insert a
5. Place an empty airpot under the
funnel.
3. Shake funnel gently to level
grounds.
6. Place “ON/OFF” switch in lighted
upper position.
7. Momentarily press and release
the “ST ART” switch.
33929.0000B 10/01 ©2001 Bunn-O-Matic Corporation
8. When brewing is complete,
discard the grounds and filter .
BUNN
®
CWTF APS Brewer and Airpot
Cleaning Instructions
1. Remove the sprayhead.
4. Use a clean damp cloth rinsed
in mild, non-abrasive detergent
to clean all surfaces.
2. Clean mineral deposits and
rinse. Make sure all holes are
open.
5. Open the airpot by pressing the
buttons located on either side of
the nozzle and lifting.
3. With the sprayhead removed,
6. Remove the pump tube assem-
insert the deliming spring all the
way into the sprayhead tube.
Move back and forth five or six
times. Replace sprayhead.
bly.
7. Thoroughly rinse the entire
server.
8. Use a clean damp cloth rinsed
in mild, non-abrasive detergent
to clean all surfaces.
33929 103001