INTERNATIONAL
ITE M#
Thermal Carafe Automatic
Coffee Brewer
Features
Thermal Automatic Coffee Brewer
• Accepts thermal carafe up to 8.5” tall (21.6cm).
• Use in quick turn environment where high quality coffee is continuously
refreshed.
• Models are space saving 9.0” wide (22.9cm).
• All stainless steel construction.
• Hot water faucet available on most models.
• SplashGard® funnel deflects hot liquids away from the hand.
• Pourover feature.
• Pourover model available (CW-TC).
• Brew capacity varies by model. See back for details.
PROJECT
DATE
(no warmers) (thermal carafe sold separately)
Dimensions: 17.9” H x 9” W x 18.5” D
(45.5cm H x 22.9cm W x 47cm D)
For current specification sheets and other information, go to www.bunn.com.
CWTF-TC
Related Products
Easy Clear® EQ-17-TL
Product No. : 30200.1000
Thermal Carafe
Product No. : 36029.0001
International models may vary in appearance.
Paper Filter Pack
Product No. : 20115.0000
Patents Apply
12/06
A3.13
Dimensions & Specifications
Model Product # Volts Amps Tank Heater Total Brewing Shipping Cord Agency
Watts Watts Capacity Weight Attached
CWA-TC 23001.0067 230 9.1 1850 2100 5.2 gal./hr. 28 lbs. Yes
(19.7 L./hr.) (12.7 kg) UK Plug
CWTFA–TC 12950.0362 230 9 1850 2100 5.2 gal./hr. 31 lbs. No
Power cord 27728.0001 (19.7 L/hr.) (14.1 kg)
CWTFB-TC 12950.0361 100 13 1250 1300 3.5 gal./hr. 28 lbs. Yes
(13.3 L/hr.) (12.7 kg)
CWTFA-TC 12950.0415 220 8.6 1850 1900 5.2 gal./hr. 31 lbs. No
Power cord 27728.0001 (19.7 L/hr.) (14.1 kg)
CWTFA-TC 12950.0416 230 9 2022 2070 5.7 gal./hr. 31 lbs. Yes
(21.6 L/hr.) (14.1 kg) UK Plug
Thermal carafe sold separately.
Brewing capacity: based on incoming water temp of 60˚F/15˚C (140˚C/60˚C rise) per 1.9 litre brew time of 4 minutes.
Electrical: 230V model requires 2-wires plus ground service rated 220-240V, single phase, 50/60 Hz.
100V model requires 2-wires plus ground service, single phase, 50 Hz.
220V model requires 2-wires plus ground service rated 220-240V, single phase, 60 Hz.
Plumbing: 20-90 psi (138-621 kPa). M
achine supplied with 1⁄4" male flare fitting.
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in centimeters. Bunn-O-Matic Corporation owns all copyrights relating to materials in this publication. Please contact BUNN to request permission to reproduce any portion of this publication.