Bunn-O-Matic CRT5, CRTF5 Part Manual

CRT5

CRTF5

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁcations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as speciﬁed below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes ﬁrst. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, PowerLogic, Quality Beverage Equipment Worldwide, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, 392, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Proﬁt Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Proﬁts, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Signature Series, Tea At Its Best, Phase Brew, The Horizontal Red Line, Titan, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation.

10857 030110

TABLE OF CONTENTS

Hood, Trunk and Panels ............................................................................................................................. 4

Fill Basin .................................................................................................................................................... 8

Tank and Components - CRT5,CRTA5,CRTB5 (w/o Faucet) ..................................................................... 10

Tank and Components - CRTF5,CRTFA5,CRTFB5 (with Faucet) ............................................................... 12

Manifolds ................................................................................................................................................. 14

External Strainer, Flow Control, Solenoid and Lines ................................................................................. 16

Internal Strainer, Flow Control, Solenoid and Lines.................................................................................. 18

Fill Solenoids ............................................................................................................................................ 20

Faucet and Tubing ................................................................................................................................... 22

Electrical and Operating Controls ............................................................................................................. 24

Warmer Assemblies ................................................................................................................................. 28

Funnels and Filter Basket ......................................................................................................................... 30

Numerical Index ....................................................................................................................................... 32

10857 110508

HOOD, TRUNK AND PANELS

CRT5

CRTF5

16 33

31 1

EARLY COVERS DISCONTINUED

19 18

20 22 24

21 23 25

OPTIONAL LEGS

17A

EARLY MODELS

P661.37

10857 100108

HOOD, TRUNK AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 02722.0000 1 Lid, Pour-In (Early Models)

01319.0000 1 Screw, Thumb, #8-32 x .75”

00912.0000 1 Fastener, J-Type #8-32

2 12953.1001 1 Cover Assembly, Top (Includes Decal & Flip Lid)

01303.0000 1 Screw, Pan Head #4-40 x .50”

00916.0000 1 Fastener, J-Type #4-40

3 00833.0000 1 Decal, Pour-In Water Only

4 13350.0006 1 Housing, Hood

02308.0000 6 Screw, Pan Head Serrated #8-32 x .375”

5 03263.0002 1 Spacer, Sponge W/Adhesive (Early Models)

6 25658.0000 2 Housing W/Decal, Side Warmer (Includes Decal)

02308.0000 14 Screw, Pan Head Serrated #8-32 x .375”

7 12364.0000 2 Decal, Caution - Warmers And Surfaces Are Hot

8 34061.1035 1 Trunk W/Decals Late Models with ON/OFF Rocker Switch (includes Decals)

25352.0001 1 Trunk W/Decals Early Models w/o Switch (includes Decals & Plugs)

02308.0000 9 Screw, Pan Head Serrated #8-32 x .375”

9 25144.0006 1 Panel W/Decals (Includes items 10, 11)(also order Item 32 for late models)

25144.0002 1 Panel W/Decal (Includes item 10) (“A” & “B” Models)

01382.0000 4 Screw, Truss Head #6-32 x .375”

00988.0000 4 Fastener, U-Type #6-32

10 00658.0000 1 Decal, Caution - Decanter/Funnel

11 10476.0000 1 Schematic, Electrical 120V & 120V/240V

12 01593.0000 3 Bushing, Snap 1.5” Dia

13 01592.0000 3 Bushing, Snap 1” Dia

14 25755.0000 1 Housing W/Decals, Base (Includes items 15, 16, 17A & 19)

25755.0002 1 Housing W/Decals, Base (Includes items 15 & 16) (If for Early Models also order .250” Legs)

15 22306.0000 3 Decal, Red Decorative Stripe

16 37881.0000 2 Decal, No Serviceable Parts

17 11435.0000 4 Foot, Rubber - .625” Dia x .25 Ht (Early Models)

02308.0000 4 Screw, Pan Head Serrated #8-32 x .375”

22568.0000 1 Kit, Foot Set of 4 (Includes Screws)

(Continued)

10857 100108

HOOD, TRUNK AND PANELS

CRT5

CRTF5

16 33

31 1

EARLY COVERS DISCONTINUED

19 18

20 22 24

21 23 25

OPTIONAL LEGS

17A

EARLY MODELS

P661.37

10857 100108

HOOD, TRUNK AND PANELS

ITEM PART NO. QTY. DESCRIPTION

17A 25137.0000 4 Foot, .25”-20 (Late Models)

35712.0000 1 Kit, Foot Set of 4

18 00671.0000 4 Plug, Hole - Nyl .312” Dia. (Not used on brewers with 4” adjustable legs.) (Early Models)

19 12832.0001 1 Plate Assembly, Base (Early Models)

26583.0000 1 Plate Assembly, Base (Late Models)

02332.0002 14 Screw, Hex-Crimptite #6 x .375”

20 12070.0001 4 Leg, Plastic - 4.0” Lg

12072.0001 1 Leg Kit, Set of 4, Includes Pads & Screws

01321.0000 4 Screw, Truss Head #8-32 x 1”

21 12071.0001 4 Plug, Leg-Rubber

22 03359.0000 4 Leg, Adjustable Plastic - 4.0” Lg (.375”-16) (Early Models)

13255.0001 1 Leg Kit, Adjustable Plastic - Set of 4, Includes Pads (Early Models)

03359.0001 4 Leg, Adjustable Plastic - 4.0” Lg (.250”-20) (Late Models)

13255.0005 1 Leg Kit, Adjustable Plastic - Set of 4, Includes Pads (Late Models)

23 03993.0000 4 Pad, Rubber .70” Dia

24 00502.0000 4 Leg, Adjustable Nickel 4.0” Lg (Early Models)

00511.0000 4 Leg, Adjustable Nickel 4.0” Lg (Late Models)

25 03996.0000 4 Pad, Rubber 1.25” Dia.

26 03011.0000 3 Plug, Vent 1.0” Dia. (Early Models)

27 00670.0000 1 Plug, Hole .437” Dia (Brewers W/Out Faucet)

28 00656.0000 1 Decal, Comply To Plumbing Code

29 26225.0000 1 Decal, Flow Control/Strainer (Brewers W/External Flow Control and Faucet)

30 00831.0000 1 Decal, Warning - Electrical

31 02999.0000 1 Plug, Hole - 1.19” Dia (Late Models)

32 32540.0000 1 Decal, Batch Set (Digital Timer) (Late Models)

33 38498.1000 1 Flip Lid Assembly

10857 100108

04270.0002

01592.0000 (2)

02337.0001

FILL BASIN

CRT5

CRTF5

P662

10857 072103

FILL BASIN

ITEM PART NO. QTY. DESCRIPTION

1 27514.0000 1 Plate, Splash Guard

2 01212.0000 1 Fitting, Tank Inlet (Early Models)

3 04270.0002 1 Fill Basin

4 01201.0000 1 Gasket, Tank Inlet

5 12914.0002 1 Tube Assembly, Solenoid To Fill Basin (Includes item 6)

6 12928.0000 1 Grommet, Basin

7 01212.0000 1 Fitting

10857 072103

TANK AND COMPONENTS CRT5, CRTA5, CRTB5

CRT5

CRTF5

10 11

P654

10857 022500

+ 23 hidden pages