Bunn-O-Matic 438000102 Specifications

iMIX-14
(82.8cm x 61.0cm x 48.8cm)
32.6" x 24.0" x 19.2"
7” diagonal touch screen communicates advertising messages, machine status, technical support contact information and provides programming for settings and service adjustment.
Cup clearance at 6.75” (17.1cm) to accommodate popular cup sizes
Front of machine access for set up and calibration, tank drain, dump valves, auger and whipper motors and control board for easy service
Interchangeable LED backlit display Requires special powder products (contact your BUNN Sales Rep). Serves up to 14 hot beverages plus hot water dispense RPM feedback monitoring on auger motors assure consistent
flavors and profits by controlling powder dosing 7gal (26.5L) hot water tank to meet peak serving times
Low product detection system alerts audibly and with message on display when hoppers are low
Night mode to prevent pilferage Spring-loaded, all metal auger drive system for easy hopper
installation
Agency:
Specifications Additional Features
Finish:
Black
Top HingeDoor:
Dispense:
43800.0102Product #: Push Button
SixHoppers:
Portion Control
Dispense:
PlumbedWater Access:
Electrical & Capacity
Volts Amps Watts
120 15 1800 Yes NEMA 5-15P 67
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
60°F (15.5°C)
Phase
1 2
# Wires
plus Ground
Hertz
50/60
Plumbing Requirements CAD Drawings
PSI kPa
20-100 138-689
Fitting Supplied
1/4" Male Flare Fitting
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. For most current specifications and other info visit bunn.com.
Water Flow Required (GPM)
-
2D
Revit
KLC
Created on:
11/16/2016
Unit Shipping
Width Height
Depth
Width Height
Depth
Weight
Volume
English 19.2 in. 32.6 in. 24.0 in. - - - 133.300 lbs 16.845 ft³
Metric 48.8 cm 82.8 cm 61.0 cm - - - 60.465 kgs 0.477 m³
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. For most current specifications and other info visit bunn.com.
Created on:
11/16/2016
Loading...
+ 2 hidden pages