BrewMETER® allows automatic programming of pulse routine
WAVE COMBO
16.9" x 17.2" x 9.7"
(42.9cm x 43.7cm x 24.6cm)
Adjustable legs to accommodate up to 3.0L lever action and 2.5L
push button BUNN airpots and thermal servers
Brew into 1.9L thermal carafe using the slide-out booster tray
Four-digit LED read-out for simple programming
Utilize the same LED read-out for brewer status (Ready, Heating,
Brewing)
SmartWAVE technology increases turbulence in the brew funnel
Energy-saver mode reduces tank temperature during idle periods
Ensures coffee brew quality with cold brew lock out capability
SplashGard® tea and coffee funnels (included) deflect hot liquids
away from the hand
Iced Tea: 35oz concentrate, 90oz dilution.
Agency:
Servers and airpots sold separately
Specifications Additional Features
39900.0020Product #: BrewMETER
PlumbedWater Access:
Finish:
Stainless
Black PlasticFunnel:
Translucent Tea FunnelFunnel:
Electrical & Capacity
Volts Amps Watts
120 11.3 1350 Yes NEMA 5-15P 62
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
60°F (15.5°C)
Phase
1 2 60
# Wires
plus Ground
Hertz
Plumbing Requirements CAD Drawings
PSI kPa
20-90 138-621
Fitting Supplied
1/4" Male Flare Fitting
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Water Flow Required (GPM)
-
2D
Revit
•
KLC
Created on:
11/16/2016
Unit Shipping
Width Height
Depth
Width Height
Depth
Weight
Volume
English 9.7 in. 16.9 in. 17.2 in. - - - 24.500 lbs 2.540 ft³
Metric 24.6 cm 42.9 cm 43.7 cm - - - 11.113 kgs 0.072 m³
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Created on:
11/16/2016