Bunn-O-Matic 387000014 Specifications

AXIOM 4/2 TWIN
(4U/2L Warmers)

19.1" x 21.4" x 16.4"

(48.5cm x 54.4cm x 41.7cm)

Adjusts automatically to varying water pressure
Automatic warmer shut-off
For high lime areas, BrewLOGIC® technology calculates flow rate

and adjusts brew time to maintain consistent pot levels
Electronic diagnostics and built-in tank drain make service easier

Large 200oz. (5.9L) tank provides back-to-back brewing capacity
Ensure coffee quality with programming for brew level, cold brew

lock- out and tank temperature, set easily from the front of the
machine

Coffee extraction controlled with programmable pre-infusion, pulse
brew and digital temperature precision

All stainless steel construction
Energy-saver mode reduces tank temperature during idle periods
Hot water faucet
SplashGard® funnels deflect hot liquids away from the hand
Six individually controlled warming stations
Twin brew head system

Agency:

Servers and airpots sold separately

Specifications Additional Features

Warmers:

Four Upper / Two Lower

DBC

Finish:

38700.0014Product #:
PlumbedWater Access:

Stainless

Stainless SteelFunnel:
UpperFaucet:

Electrical & Capacity

Volts Amps Watts

120/208-240

27.9 6700 No - 240

Cord

Attached

Plug Type

8oz cups/hr

236ml cups/hr

Input H²O

Temp.

60°F (15.5°C)

Phase

1 3 60

# Wires

plus Ground

Hertz

Plumbing Requirements CAD Drawings

PSI kPa

20-90 138-621

Fitting Supplied

3/8" Male Flare Fitting

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.

Water Flow Required (GPM)

-

2D

Revit

•

KLC

Created on:

11/16/2016

Unit Shipping

Width Height

Depth

Width Height

Depth

Weight

Volume

English 16.4 in. 19.1 in. 21.4 in. - - - 52.250 lbs 5.939 ft³

Metric 41.7 cm 48.5 cm 54.4 cm - - - 23.701 kgs 0.168 m³

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.

Created on:

11/16/2016