iMIX-5 Black, Top Hinge
Door
32.8" x 24.0" x 19.3"
(83.3cm x 61.0cm x 49.0cm)
7gal (26.5L) hot water tank to meet peak serving times
Alphanumeric display communicates advertising messages,
machine status and technical support contact information
Auger motors with RPM feedback monitoring assure consistent
flavors and profits by controlling powder dosing
Capacity: Five 8lb (3.6kg) hoppers
Cup clearance at 7.25” (18.4cm) to accommodate popular cup
sizes [adjustable to 8.12” (20.6cm)]
Front of machine access to tank drain, dump valves, auger and
whipper motors and control board for easy service set up and
calibration
High speed heavy-duty whipper for complete product mixing
Low product detection system alerts audibly and with message on
display when hoppers are low
High efficiency LED lighted front graphics for merchandising
Night mode to prevent pilferage
Spring-loaded, all metal auger drive system for easy hopper
installation
Agency:
Servers and airpots sold separately
Specifications Additional Features
Finish:
37000.0020Product #: Push Button
Dispense:
PlumbedWater Access:
Stainless
FiveHoppers:
Top HingeDoor:
BUNNLINK Compatible
Electrical & Capacity
Volts Amps Watts
120 15 1800 Yes NEMA 5-15P 72
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
60°F (15.5°C)
Phase
1 2 60
# Wires
plus Ground
Hertz
Plumbing Requirements CAD Drawings
PSI kPa
20-100 138-689
Fitting Supplied
1/4" Male Flare Fitting
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Water Flow Required (GPM)
-
2D
Revit
•
KLC
Created on:
10/14/2016
Unit Shipping
Width Height
Depth
Width Height
Depth
Weight
Volume
English 19.3 in. 32.8 in. 24.0 in. - - - 135.050 lbs -
Metric 49.0 cm 83.3 cm 61.0 cm - - - 61.259 kgs -
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Created on:
10/14/2016