Bunn-O-Matic 263000000 Installation Manual

Hot Water

Dispensers

Supercedes

10052.0000; 10010.0000; 10267.0000

10420.0000; 10889.0000; 39338.0000

39338.0001; 44306.0000

INSTALLATION & OPERATING GUIDE

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

To ensure you have the latest revision of the manual or to obtain the illustrated parts catalog, please visit the Bunn-O-Matic website, at www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and manual updates. Contact Bunn-O-Matic Corporation at 1-800-2866070 to obtain a paper copy of the required Illustrated Parts Catalog mailed via U.S. Postal Service.

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.

2) All other equipment - 2 years parts and 1 year labor plus added warranties as speciﬁed below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes ﬁrst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make

modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Proﬁt Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Proﬁts, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing conﬁguration is a trademark of Bunn-O-Matic Corporation.

46819.1 031314

CONTENTS

-1000 213.8 101.0 200 93.3

-500 212.9 100.5 200 93.3 0 212.0 100.0 200 93.3

500 211.1 99.5 200 93.3 1000 210.2 99.0 200 93.3 1500 209.3 98.5 200 93.3 2000 208.4 98.0 200 93.3 2500 207.4 97.4 200 93.3 3000 206.5 96.9 199 92.8 3500 205.6 96.4 198 92.2 4000 204.7 95.9 197 91.7 4500 203.8 95.4 196 91.1 5000 202.9 94.9 195 90.6 5500 201.9 94.4 195 90.6 6000 201.0 93.9 194 90.0 6500 200.1 93.4 193 89.4 7000 199.2 92.9 192 88.9 7500 198.3 92.4 191 88.3 8000 197.4 91.9 190 87.8 8500 196.5 91.4 189 87.2 9000 195.5 90.8 188 86.7 9500 194.6 90.3 187 86.1

10000 193.7 89.8 186 85.6

Brew water temperature is factory set at 200° F (93.3° C) Areas of high altitude will require lowering this temperature to prevent boiling. This chart should be used as a guide when readjusting the brew water temperature.

Altitude

(Feet)

Boiling point

of water

° F ° C

Recommended

water temperature

° F ° C

WARRANTY ........................................................................................................... 2

INTRODUCTION ..................................................................................................... 3

CE & NORTH AMERICA REQUIREMENTS .............................................................. 4

USER NOTICES ...................................................................................................... 5

ELECTRICAL REQUIREMENTS ............................................................................... 6

PLUMBING REQUIREMENTS ................................................................................. 7

INITIAL SET-UP (H5E, H5X, H5-PC, H3/5 ELEMENT, H10X) .................................. 7

INITIAL SET-UP H5M, HW2, OHW ......................................................................... 8

OPERATING CONTROLS (H5-PC ONLY) ................................................................. 9

ADJUST DISPENSE VOLUME (H5-PC ONLY) ......................................................... 9

PROGRAMMING (H5E, H5X, H5-PC, H10X) ........................................................ 10

PROGRAMMING (H5 ELEMENT) ......................................................................... 12

PROGRAMMING (H3E ELEMENT) ....................................................................... 15

DRAINING THE DISPENSER ................................................................................ 18

CLEANING ............................................................................................................ 18

INTRODUCTION

WALL MOUNT & SUPPORT ................................................................................. 18

This equipment heats and dispenses water on demand for beverages and cooking purposes. It has a panel above the faucet that indicates the status of the dispenser. This equipment is for indoor use, either wall-mounted (H5E/X/PC) or on a sturdy counter or shelf.

46819.1 070215

CE REQUIREMENTS

• This appliance must be installed in locations where it can be overseen by trained personnel.

• For proper operation, this appliance must be installed where the temperature is between 5°C to 35°C.

• Appliance shall not be tilted more than 10° for safe operation.

• An electrician must provide electrical service as speciﬁed in conformance with all local and national codes.

• This appliance must not be cleaned by water jet.

• This appliance can be used by persons aged from 18 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

• Keep the appliance and its cord out of reach of children aged less than 18 years.

• Appliances can be used by persons 18 years and above with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Children under the age of 18 years should be supervised to ensure they do not play with the appliance.

• If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personnel with a special cord available from the manufacturer or its authorized service personnel in order to avoid a hazard.

• Machine must not be immersed for cleaning.

• Cleaning and user maintenance shall not be made by children unless they are older than 18 years and supervised.

• This appliance is intended to be used in household and similar applications such as: – staff kitchen areas in shops, ofﬁces and other working environments; – by clients in hotels, motels and other residential type environments; – bed and breakfast type environments.

• This appliance not intended to be used in applications such as: – farm houses;

• Access to the service areas permitted by Authorized Service personnel only.

• The A-Weighted sound pressure level is below 70 dBA.

NORTH AMERICAN REQUIREMENTS

• This appliance must be installed in locations where it can be overseen by trained personnel.

• For proper operation, this appliance must be installed where the temperature is between 41°F to 95°F (5°C to 35°C).

• Appliance shall not be tilted more than 10° for safe operation.

• An electrician must provide electrical service as speciﬁed in conformance with all local and national codes.

• This appliance must not be cleaned by pressure washer.

• Keep the appliance and its cord out of reach of children aged less than 18 years.

• Children under the age of 18 years should be supervised to ensure they do not play with the appliance.

• Machine must not be immersed for cleaning.

• Cleaning and user maintenance shall not be made by children unless they are older than 18 years and supervised.

• This appliance is intended for commercial use in applications such as: – staff kitchen areas in shops, ofﬁces and other working environments; – by clients in hotel and motel lobbies and other similar types of environments;

• Access to the service areas permitted by Authorized Service personnel only.

46819.1 022015

USER NOTICES

International Code Council and the Food Code

this equipment must be installed with adequate backflow prevention to comply with federal, state and local codes. For models installed outside the

The notices on this dispenser should be kept in good condition. Replace unreadable or damaged labels.

NOTICE

ALL COMPONENTS ARE

200 TO 240 VOLT A.C.

Replace only with

components listed in the

accompaning literature

rated for the same

voltage

12537.0000

00824.0002 00824.0001

00833.0000

As directed in the International Plumbing Code of the

Manual of the Food and Drug Administration (FDA),

00657.0000

NOTICE

ALL COMPONENTS ARE

200 TO 240 VOLT A.C.

Replace only with

components listed in the

accompaning literature

rated for the same

voltage

12537.0000

37881.0000

U.S.A., you must comply with the applicable Plumbing /Sanitation Code for your area.

00656.0001

Optional Field Wiring

120 V, 15.4 A, 1850 W

1PH, 2-Wire + GND, 60HZ

29710.0017

Optional Field Wiring

120/208-240 V, 16.9 A, 4050 W

1PH, 3-Wire + GND, 60HZ

29710.0018

44025.0000 H5 Element (shown)

44025.0002 H3 Element

00831.0000

120V

00831.0000

120/208-240V

To reduce the risk of electric shock, do not remove or open cover. No user-serviceable parts inside.

37881.0002

12593.0000

Authorized service personnel only. Disconnect power before servicing.

46819.1 040816

ELECTRICAL REQUIREMENTS

POWER CORD

WARNING - The dispenser must be disconnected from the power source until speciﬁed in Initial Set-Up.

Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements.

L1 BLACK

WHITENEUTRAL

GREEN

POWER CORD

N BLUE NEUTRAL BLUE

L1 BROWN

GREEN/YELLOW

220-240 volt ac (A)models

Note: This electrical service consists of 2 current carrying conductors (L1 and Neutral) and a separate conductor for earth ground.

WHITE

NEUTRAL L1 BLACK

120 volt ac models

Note: This electrical service consists of 2 current carrying conductors (L1 and Neutral) and a separate conductor for earth ground.

Electrical Hook-Up CAUTION – Improper electrical installation will damage

electronic components.

1. An electrician must provide electrical service as speciﬁed.

2. Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

3. Turn off master switch (if equipped).

4. Remove the upper and lower rear panels.

5. Install the proper electrical wiring to the terminal block.

6. Connect the dispenser to the power source and verify the voltage at the terminal block before proceeding. Reinstall both rear panels.

7. If plumbing is to be hooked-up later be sure the dispenser is disconnected from the power source. If Plumbing has been hooked-up, the dispenser is ready for Initial Set-Up.

POWER CORD

L2 RED L2 RED

L1 BLACK

GREEN

POWER CORD

208 & 240 volt ac models

Note: This electrical service consists of 2 current carrying conductors (L1 and L2) and a separate conductor for earth ground.

L2 RED L2 RED

WHITE

NEUTRAL L1 BLACK

L1 BLACK

WHITENEUTRAL

GREEN

120/208 & 120/240V ac

single phase models

Note: This electrical service consists of 3 current carrying conductors (Neutral, L1 and L2) and a separate conductor for earth ground.

DUAL VOLT TOGGLE SWITCH

46819.1 090916

+ 12 hidden pages