Bunn-O-Matic 025000001 Specifications

HW2 SST
24.0" x 14.3" x 7.1"
(61.0cm x 36.3cm x 18.0cm)
2gal (7.57L) of hot water in a space-saving machine just
7.1" (18.03cm) wide to fit any counter Includes drip tray
High quality, easy-to-clean stainless steel exterior and tank for a long, dependable life
Fresh, hot water is always available since the HW2 is plumbed to your water line
Agency:
Specifications Additional Features
02500.0001Product #: Capacity at 60° F
Finish:
Stainless
UpperFaucet:
Temp. Setting:
200°F (93.333°C) PlumbedWater Access:
Electrical & Capacity
Volts Amps Watts
120 15 1800 Yes NEMA 5-15P -
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
60°F (15.5°C)
Phase
1 2 60
# Wires
plus Ground
Hertz
Plumbing Requirements CAD Drawings
PSI kPa
20-90 138-621
Fitting Supplied
1/4" Male Flare Fitting
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. For most current specifications and other info visit bunn.com.
Water Flow Required (GPM)
-
2D
Revit
KLC
Created on:
02/02/2017
Unit Shipping
Width Height
Depth
Width Height
Depth
Weight
Volume
English 7.1 in. 24.0 in. 14.3 in. - - - 20.150 lbs 3.111 ft³
Metric 18.0 cm 61.0 cm 36.3 cm - - - 9.140 kgs 0.088 m³
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. For most current specifications and other info visit bunn.com.
Created on:
02/02/2017
Loading...
+ 2 hidden pages