Bunn Coffee Maker VPRA Parts List

To reduce the risk of electric shock,

do not remove or open cover.

No user-serviceable parts inside.

Authorized service personnel only.

Disconnect power before servicing.

VPR

Prior to S/N VPR0270000

VPS

Models without Lighted Switches

POUR IN WATER ONLY

e servicing.

To reduce the risk of electric shock,

do not remove or open cover.

No user-serviceable parts inside.

Authorized service personnel only.

Disconnect power befor

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁcations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor.

2) All other equipment - 2 years parts and 1 year labor plus added warranties as speciﬁed below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts

and labor for 4 years or 40,000 pounds of coffee, whichever comes ﬁrst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make

modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Proﬁt Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Nothing Brews Like a BUNN, Pouring Proﬁts, Signature Series, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing conﬁguration is a trademark of Bunn-O-Matic Corporation.

10784 021513

TABLE OF CONTENTS

Electrical and Operating Controls .............................................................................................................18

Funnels, Pitcher and Filter Basket ............................................................................................................22

Fill Basin ..................................................................................................................................................12

Hood and Top Covers (VPR-VPRA) ...........................................................................................................8

Hood and Top Covers (VPS-VPSA) ..........................................................................................................10

Galley Kit ................................................................................................................................................. 24

Numerical Index .......................................................................................................................................26

Tank and Components..............................................................................................................................14

Trunks and Panel (VPR-VPRA)...................................................................................................................4

Trunks and Panels (VPS-VPSA) .................................................................................................................6

Explanation of codes: 15 - All components in machine are rated for 120 Volts ac, (15 Amps) 20 - All components in machine are rated for 120 Volts ac, (20 Amps) 35 (120/240V) - Tank heater rated for 240 volts ac, all other components rated for 120 volts ac (20 Amps) DV - Dual Voltage. 2 tank heaters with toggle switch A - All components in machine are rated for 240 volts ac. B - All components are rated for either 100 volts ac, or 200 volts ac. CE - All components are rated for 230 volts ac for use in Europe. APS - Airpot Server (No warmers) TC - Thermal Carafe (No warmers)

Fraction Decimal Fraction Decimal

1/16 0.063 9/16 0.563

1/8 0.125 5/8 0.625

3/16 0.188 11/16 0.688

1/4 0.250 3/4 0.750

5/16 0.313 13/16 0.813

3/8 0.375 7/8 0.875

7/16 0.438 15/16 0.938

1/2 0.500 1 1.000

10784 121206

TRUNKS AND PANELS VPR - VPRA

VPR VPS

OPTIONAL LEG EXTENSIONS

P-551.85

10784 121206

TRUNKS AND PANELS VPR - VPRA

ITEM PART NO. QTY. DESCRIPTION

1 25132.0000 1 Panel W/Decals, Trunk Rear - BRN (Includes items 2 & 3)

25132.0001 1 Panel W/Decals, Trunk Rear - BLK (Includes items 2 & 3)

01311.0000 5 Screw, Truss Head #8-32 x .25”

00978.0000 5 Fastener, Flat Type #8-32

01511.0000 1 Lock washer, Ext. Tooth #8

2 00658.0000 1 Decal, Caution - Decanter/Funnel

3 00831.0000 1 Decal, Warning-Electrical

4 01663.0000 1 Bushing, Snap - .875” Dia

5 01686.0000 1 Bushing, Strain Relief - Nylon

6 06202.1000 1 Housing, Base (VPR)(Includes item 12)

7 06204.0000 1 Housing, Trunk Front (WG)

06204.0003 1 Housing, Trunk Front (BLK)

01311.0000 5 Screw, Truss Head #8-32 x .25”

00978.0000 5 Fastener, Flat Type #8-32

8 06203.0000 1 Cover, Base

02332.0002 6 Screw, Hex-Crimptite #6-32 x .375”

9 03995.0000 4 Foot, Rubber - .75 OD x .44 HT

02332.0002 4 Screw, Hex-Crimptite #6-32 x .38”

- - - - - - - - 4 Foot, Rubber - .75 OD x .44 HT (Order item 13)(Late Models)

01390.0000 4 Screw, Round Head - Phillip #8-32 x .62”

02324.0000 4 Nut, Acorn - High Crown #8-32

10 03992.0000 4 Plug, Foot-Rubber (Early Models)

11 02776.0000 2 Leg, Extensions - 3.5” HT (Optional)

02332.0002 4 Screw, Hex-Crimptite #6-32 x .38”

12 12364.0000 1 Decal, Caution - warmers are hot

13 04198.0001 - Kit, Foot (Includes 4 of item 9)

Early Models

For Optional Leg Extension

* Indicates the part number listed is obsolete with no replacement.

10784 121206

TRUNKS AND PANELS VPS - VPSA

6 14

VPR VPS

OPTIONAL LEG EXTENSIONS

P-558.90

10784 121206

TRUNKS AND PANELS VPS - VPSA

ITEM PART NO. QTY. DESCRIPTION

1 25154.0000* 1 Panel W/Decals, Trunk Rear - BRN (Includes items 2 & 3)

25154.0001 1 Panel W/Decals, Trunk Rear - BLK (Includes items 2 & 3)

01311.0000 5 Screw, Truss Head #8-32 x .25”

00978.0000 5 Fastener, Flat Type #8-32

01511.0000 1 Lock washer, Ext. Tooth #8

2 00658.0000 1 Decal, Caution - Decanter/Funnel

3 00831.0000 1 Decal, Warning-Electrical

4 01663.0000 1 Bushing, Snap - .875” Dia

5 01686.0000 1 Bushing, Strain Relief - Nylon

6 04273.1000 1 Housing, Base (VPS)(Includes item 12)

04272.0002 1 Housing, Base (VPSA)

7 04204.0000* 1 Housing, Trunk Front (WG)

37454.0000 1 Housing, Trunk Front (BLK)

01311.0000 6 Screw, Truss Head #8-32 x .25”

00978.0000 6 Fastener, Flat Type #8-32

8 04203.0000 1 Cover, Base

02332.0002 6 Screw, Hex-Crimptite #6-32 x .375”

9 03995.0000 4 Foot, Rubber - .75 OD x .44 HT

02332.0002 4 Screw, Hex-Crimptite #6-32 x .38”

- - - - - - - - 4 Foot, Rubber - .75 OD x .44 HT (Order item 13)(Late Models)

01390.0000 4 Screw, Round Head - Phillip #8-32 x .62” For Optional

02324.0000 4 Nut, Acorn - High Crown (SST) #8-32 Leg Extension

10 03992.0000 4 Plug, Foot-Rubber (Early Models)

11 02776.0000 2 Leg, Extensions - 3.5” HT (Optional)

02332.0002 4 Screw, Hex-Crimptite #6-32 x .38”

12 12364.0000 2 Decal, Caution - warmers are hot

13 04198.0001 - Kit, Foot (Includes 4 of item 9)

14 00824.0000 1 Decal, Ground

Early Models

* Indicates the part number listed is obsolete with no replacement.

10784 121206

HOOD AND TOP COVERS VPR - VPRA

EARLY BREWERS

VPR VPS

P-552.45

10784 122706

+ 18 hidden pages