Bunn Coffee Maker VPR Parts Diagram

BUNN

VPR

(Serial # VPR0270000 & up)

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifications, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as specified below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

29999 082002

TABLE OF CONTENTS

Electrical and Operating Controls .............................................................................................................................................10

Funnels, Pitcher and Filter Basket ............................................................................................................................................ 12

Fill Basin .................................................................................................................................................................................... 6

Hood, Trunk, Base and Panels ................................................................................................................................................... 4

Galley Kit .................................................................................................................................................................................. 14

Numerical Index .......................................................................................................................................................................16

Tank and Components ............................................................................................................................................................... 8

29999 070101

BUNN

HOOD, TRUNK, BASE AND PANELS

2 3

4 5

VPR

P2393 .45

29999 011805

HOOD, TRUNK, BASE AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 12981.0001 1 Lid/Chain Kit (Includes items 2 thru 5)

2 20615.0000 2 Rivet, Drive .187" Dia.

3 12978.0000 1 Chain Assembly, Lid

4 20616.0000 1 Washer, Nylon .194" I.D.

5 13110.0000 1 Lid, Pour-In

6 33797.0000 1 Cover Assembly, Top W/Decal (Includes items 7,8 & 20)

01303.0000 2 Screw, Pan Head #4-40 x .50"

00916.0000 2 Fastener, J-Type #4-40

7 00833.0000 1 Decal, Pour In Water Only

8 12364.0000 2 Decal, Caution - WARMERS ARE HOT

9 37007.0000 1 Hood Assembly, W/Decal (Includes Items 10 &11)

01311.0000 4 Screw, Truss Head #8-32 x .25"

00978.0000 5 Fastener, Flat Type #8-32

36154.0000 5 Screw, Hex Hd, Sltd. #8-32 x .38" (Late Models)

Early Models

10 33214.0000 1 Decal, Control Panel

11 33769.0000 1 Decal, Schematic-Electrical

12 33767.0000 1 Housing, Trunk Front (Includes item 13)

13 00658.0000 1 Decal, Caution - Decanter/Funnel

14 01663.0000 1 Bushing, Snap - .875" Dia

15 33766.0000 1 Housing, Base (Includes item 8)

01311.0000 5 Screw, Truss Head #8-32 x .25"

00978.0000 5 Fastener, Flat Type #8-32

36154.0000 5 Screw, Hex Hd, Sltd. #8-32 x .38" (Late Models)

16 33210.0000 1 Cover, Base

02332.0002 4 Screw, Hex-Crimptite #6-32 x .375"

17 - - - - - - - - 4 Foot, Rubber - .75 OD x .44 HT (Order item 24)

18 33768.0000 1 Panel W/Decals, Trunk Rear (Includes items 19 & 22)

02322.0002 6 Screw, Truss Head Blk #8-32 x .375"

00917.0000 6 Fastener, J Type #8-32

01511.0000 6 Lockwasher, Ext. Tooth #8

19 00831.0000 1 Decal, Warning-Electrical

Early Models

Two less used on Late Models

20 29894.0000 2 Pad, Adhesive (Effective models December 2001 and up)

21 00603.0000 1 Clamp

01315.0000 1 Screw, Truss Head #8-32 x .38"

22 37881.0000 1 Decal, No Serviceable Parts

23 00824.0000 1 Decal, Ground

24 04198.0001 - Kit, Foot (Includes 4 of item 17)

29999 011805

+ 11 hidden pages