Bunn Coffee Maker VP17A Parts Diagram

BUNN

VP17A

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifications, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

www.bunnomatic.com

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as specified below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

10861.1 071602

TABLE OF CONTENTS

TITLE ............................................................................................................................................................................... PAGE NO.

Electrical and Operating Controls ..............................................................................................................................................14

Fill Basin ................................................................................................................................................................................... 10

Funnels, Pitcher and Filter Basket ............................................................................................................................................. 18

Hood and Top Covers ................................................................................................................................................................. 8

Numerical Index ........................................................................................................................................................................20

Tank and Components .............................................................................................................................................................. 12

Trunks, Panels and Base ............................................................................................................................................................. 4

Warmer Assemblies ..................................................................................................................................................................16

10861.1 091300

BUNN

TRUNKS, PANELS AND BASE - BREWERS W/ONE WARMER

BASE & TOP WARMER

2 3 1

VP17A

1 17

BREWERS WITH BLACK DECOR

OPTIONAL LEGS

P1244

10861.1 061598

TRUNKS, PANELS AND BASE - BREWERS W/ONE WARMER BASE & TOP WARMER

ITEM PART NO. QTY. DESCRIPTION

1 25352.0000 1 Trunk W/Decals BLK Vinyl (Includes items 2 & 3)

23320.1002 1 Trunk W/Decals BLK Painted (Includes items 2 & 3)

25352.0001 1 Trunk W/Decals SST (Includes items 2 & 3)

2 00670.0000 3 Plug, Hole - .437” Hole Dia. (1 less used on Models with Tank Heater Switch)

3 00831.0000 1 Decal, Warning-Electrical

4 25144.0003 1 Panel W/Decal, Trunk - BLK Vinyl (Includes item 5)

23319.1003 1 Panel W/Decal, Trunk - BLK Painted (Includes item 5)

25144.0002 1 Panel W/Decal, Trunk - SST (Includes item 5)

01382.0000 4 Screw, Truss Head - SST #6-32 x .375”

01382.0002 4 Screw, Truss Head - BLK #6-32 x .375”

00988.0000 4 Fastener, U-Type #6-32

5 00658.0000 1 Decal, Caution - Decanter/Funnel

6 25351.0001 1 Housing W/Decals, Base (Includes items 7 & 8)

02308.0000 9 Screw, Pan Head - Serrated #8-32 x .375”

7 12364.0000 1 Decal, Caution - Warmers And Surfaces Are Hot

8 22306.0000 1 Decal, Red Decorative Stripe

9 24805.0000 1 Plate, Base

02332.0002 6 Screw, Hex-Crimptite #6 x .375”

10 25137.0000 4 Foot, Black W/.250”-20 THD

11 00511.0000 4 Leg, 4” Adjustable Satin Nickel

12 03996.0000 4 Pad, Anti-Skid, Rubber (1.25” Dia)

13 03359.0001 4 Leg, 4” Adjustable BLK

14 03993.0000 4 Pad, Anti-Skid, Rubber (.70” Dia)

15 01593.0000 1 Bushing, Snap 1.5” Dia

16 01592.0000 1 Bushing, Snap 1” Dia

17 13018.0200 1 Angle, Reinforcement

01345.0000 2 Screw, Flat Head #6-32 x .50”

00973.0000 2 Nut, Keps #6-32

18 25772.0001 - Leg Kit, 4” Adjustable BLK (Includes items 13 & 14)

25772.0002 - Leg Kit, 4” Adjustable Satin Nickel (Includes 11 & 12)

Optional Equipment. See item 18

Brewers with Black Decor

10861.1 071602

BUNN

TRUNKS, PANELS AND BASE - BREWERS W/ TWO WARMER BASE

& SIDE WARMER

2 3 1 4 8

00670.0000(2)

VP17A

1 18

BREWERS WITH BLACK DECOR

00831.0000

OPTIONAL LEGS

P1249

10861.1 061598

+ 14 hidden pages