Bunn Coffee Maker ULTRA-2 Parts Diagram

ULTRA-2

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifications, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

www.bunnomatic.com

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as specified below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are

not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/ or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

32081 062002

TABLE OF CONTENTS

Auger Drive and Cooling Drum ................................................................................................................................................. 12

Compressor and Mounting .................................................................................................................................................. 18,20

Condenser and Fan Mounting ................................................................................................................................................... 14

Electrical and Operating Controls ..............................................................................................................................................26

Frame, Panels and Drip Tray .......................................................................................................................................................4

Hopper, Cover and Faucet ...........................................................................................................................................................8

Numerical Index ........................................................................................................................................................................28

PAF Platform Assembly ............................................................................................................................................................ 10

Solenoid and Coolant Piping ................................................................................................................................................22,24

32081 111303

BUNN

FRAME, PANELS AND DRIP TRAYS

2 1 2 3 28 10

ULTRA - 2

6 20 30 19 22 23 18 17 16

P2508

32081 010603

FRAME, PANELS AND DRIP TRAYS

ITEM PART NO. QTY. DESCRIPTION

1 27136.0002 1 Trim, Hopper/Drip Tray - WHI

27136.0003 1 Trim, Hopper/Drip Tray - BLK

02329.0000 2 Screw, Round Head - Locking #8-32 x .312"

2 27394.0000 3 Plug, Plastic - WHI

27394.0001 3 Plug, Nylon - BLK

3 32111.0000 1 Drip Tray, Left Hopper - WHI

32111.0001 1 Drip Tray, Left Hopper - BLK

32111.0002 1 Drip Tray, Right Hopper - WHI

32111.0003 1 Drip Tray, Right Hopper - BLK

01311.0001 8 Screw, Truss Head - Locking #8-32 x .25"

4 27058.0000 1 Corner, Right Rear - SST

27058.0002 1 Corner, Right Rear - BLK

32580.0000 1 Screw, Hex Head #6-32 x .25"

5 32101.1000 1 Panel W/Decals, Right Side - SST (Includes items 6,7,8,9 & 10) (ULTRA-2)

32101.1001 1 Panel W/Decals, Right Side - SST (Includes items 6,8,9 & 10) (ULTRA-2A)

32101.1002 1 Panel W/Decals, Right Side - BLK (Includes items 6,7,8,9 & 10) (ULTRA-2)

32101.1003 1 Panel W/Decals, Right Side - BLK (Includes items 6,8,9 & 10) (ULTRA-2A)

32580.0000 2 Screw, Hex Head #6-32 x .25"

6 27442.0000 2 Decal, Warning - Moving Parts

7 32082.0000 1 Schematic, Electrical 120V (ULTRA-2)

-------------- 1 Schematic, Electrical 230V (ULTRA-2A)

8 00986.0002 1 Decal, Warning - Electrical

9 29947.0000 1 Decal, Caution - Two Power Cords

10 29979.0000 1 Decal, Room Temperature

11 -------------- 2 Tube, Drain .375" I.D. x .50" O.D. x 10.88" (Order item 32)

12 32116.1000 1 Panel, Front - SST (Includes items 13,14 & 29)

32116.1001 1 Panel, Front - BLK (Includes items 13,14 & 29)

32580.0000 1 Screw, Hex Head #6 x .25"

01317.0003 2 Screw, Truss Head - Locking #8-32 x .375"

13 29967.0000 1 Gasket, Electronic Box

14 32126.0001 1 Membrane Switch - BLK

15 32068.0000 1 Cover, Lower Drip Tray - WHI

32068.0001 1 Cover, Lower Drip Tray - BLK

16 28086.0000 1 Drip Tray, Lower - WHI (Includes item 17)

28086.0001 1 Drip Tray, Lower - BLK (Includes item 17)

17 21437.1000 2 Strike Assy, Self Adhesive

18 21436.0000 2 Catch, Magnetic

19 32101.1004 1 Panel W/Decals, Left Side - SST (Includes items 6,20 & 30) (ULTRA-2)

32101.1005 1 Panel W/Decals, Left Side - SST (Includes items 6,20 & 30) (ULTRA-2A)

32101.1006 1 Panel W/Decals, Left Side - BLK (Includes items 6,20 & 30) (ULTRA-2)

32101.1007 1 Panel W/Decals, Left Side - BLK (Includes items 6,20 & 30) (ULTRA-2A)

32580.0000 2 Screw, Hex Head #6-32 x .25" (Continued)

32081 062002

BUNN

FRAME, PANELS AND DRIP TRAYS

(Continued)

2 1 2 3 28 10

ULTRA - 2

6 20 30 19 22 23 18 17 16

P2508

32081 010603

FRAME, PANELS AND DRIP TRAYS

ITEM PART NO. QTY. DESCRIPTION

20 32162.0000 1 Decal, Coolant Charge (ULTRA-2)

29373.0000 1 Decal, Coolant Charge (ULTRA-2A)

21 27058.0001 1 Corner, Left Rear - SST

27058.0003 1 Corner, Left Rear - BLK

32580.0000 1 Screw, Hex Head #6 x .25"

22 26528.0000 4 Leg, Black Plastic - 4" Adj. (See item 31)

03354.0000 4 Leg, Black Plastic - 2.5" Adj. (See item 31)

23 03996.0000 4 Pad, Rubber - 4" Adj. Legs (See item 31)

03993.0000 4 Pad, Rubber - 2.5" Adj. Legs (See item 31)

24 32124.0000 1 Frame, Base (Models with AMERICOLD compressors)

32793.0000 1 Frame, Base (Models with EMBRACO compressors)

25 00927.0000 4 Clip, Spring

26 27131.0000 1 Trim, Frame - Rear - SST

27131.0001 1 Trim, Frame - Rear - BLK

27 28098.0000 2 Fastener, Snap-in

28 29702.1000 2 Plunger Assy, Hopper Lock

29 29976.0000 1 Mount, Cable

30 29959.0001 1 Decal, Cleaning Instructions

31 13255.0003 - Leg Kit, 4" Adj. Legs (Includes 4 Legs and Pads)

13255.0006 - Leg Kit, 2.5" Adj. Legs (Includes 4 Legs and Pads)

32 12421.1001 - Tube, Clear Vinyl (12" Long)

12421.1002 - Tube, Clear Vinyl (60" Long)

12421.1003 - Tube, Clear Vinyl (120" Long)

Not Illustrated

32081 103002

BUNN

HOPPER, COVER AND FAUCET

ULTRA - 2

15 8

MODELS w/PAF

MODELS w/AFPO

MODELS w/Flat Lid

P2509

32081 052202

HOPPER, COVER AND FAUCET

ITEM PART NO. QTY. DESCRIPTION

- 32196.1000 2 Cover Assembly, Hopper - WHI (Includes items 1 thru 7)

32196.1001 2 Cover Assembly, Hopper - BLK (Includes items 1 thru 7)

1 - - - - - - - - 2 Cover, Hopper - WHI

- - - - - - - - 2 Cover, Hopper - BLK

01315.0000 4 Screw, Truss Head #8-32 x .38"

2 32105.0000 4 Insert, Hopper Lid Vent - WHI

32105.0001 4 Insert, Hopper Lid Vent - BLK

3 27446.0000 4 Lamp, T-5 Wedge Base

4 27445.1000 2 Lamp Holder/Socket Assy (Includes two of item 16)

32096.0000 4 Screw, Pan Head #2-56 x .50"

5 32266.0000 4 Insert, Hopper Display

6 32195.0000 2 Liner Assy, Hopper Cover

7 27249.1000 2 Cord Assy, Lamp (Includes two of item 16)

8 32190.1000 2 Hopper Assy. (Includes item 9)

32190.1001 2 Hopper Assy. (For Models with PAF) (Includes item 9)

32190.1002 2 Hopper Assy. (For Models with AFPO) (Includes item 9)

9 32189.0000 2 Bushing, Auger Nose

10 32191.0000 2 Faucet - WHI

11 32265.0001 2 Handle, Faucet - BLK

12 32193.0000 2 Spring, Faucet

Not available. Order Cover Assembly above

13 32268.0000 2 Seal

14 27643.0000 2 Connector Assy (Includes Nut, Washer, Leads & Plug)

01532.0001 2 Lockwasher, Internal-tooth .375"

15 33176.0001 2 Tether/Probe Assy (For Models with PAF)

01393.0000 2 Screw, Truss Head #6 x .25"

16 03851.0000 4 Wire Nut (Not Illustrated)

17 29481.0000 1 Cover, Flat (Includes item 18)

18 00778.0000 1 Decal, BUNN

32081 051004

+ 20 hidden pages