Bunn Coffee Maker ULTRA-1 Parts List

ULTRA-1

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁcations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as speciﬁed below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes ﬁrst. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, PowerLogic, Quality Beverage Equipment Worldwide, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, 392, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Proﬁt Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Proﬁts, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Seed to Cup Cafe, Signature Series, Tea At Its Best, Phase Brew, The Horizontal Red Line, Titan, trifecta, Ultra, Velocity Brew are either trademarks or registered trademarks of Bunn-O-Matic Corporation.

40562 031610

TABLE OF CONTENTS

Auger Drive and Cooling Drum ................................................................................................................ 10

Compressor and Mounting (120V and 230V Models) .............................................................................. 16

Compressor and Mounting (120V and 230V Models) .............................................................................. 18

Condenser and Fan Mounting .................................................................................................................. 14

Electrical and Operating Controls ............................................................................................................. 22

Housing, Panels and Drip Tray ................................................................................................................... 4

Hopper, Cover and Faucet .......................................................................................................................... 8

Liquid Autoﬁll Kit (Optional) ..................................................................................................................... 24

Numerical Index ....................................................................................................................................... 26

Solenoid and Coolant Piping .................................................................................................................... 20

40562 040110

CHARGE

Type R404A, Amount ?? oz

Design Pressures: High ??? Low ??

10 25 11

9 8

HOUSING, PANELS AND DRIP TRAYS

ULTRA - 1

7 12

5 6 7

13 26

14 15 16

23 22 24

P3943

40562 040110

HOUSING, PANELS AND DRIP TRAYS

ITEM PART NO. QTY. DESCRIPTION

1 39898.1000 1 Drip Tray, Hopper - WHI (Includes item 2)

39898.1001 1 Drip Tray, Hopper - BLK (Includes item 2)

02308.0000 4 Screw, Pan Head Serrated #8-32 x .375"

2 29702.1000 1 Plunger Assy, Hopper Lock

3 12421.0010* 2 Tube, Drain .375" I.D. x .50" O.D. x 11.25" (Order item 27)

4 40010.1000 1 Panel W/Decals, Right Side - SST (Includes items 5-7)

40010.1002 1 Panel W/Decals, Right Side - BLK (Includes items 5-7)

32580.0000 2 Screw, Hex Head #6-32 x .25"

5 29979.0000 1 Decal, Room Temperature

6 00986.0002 1 Decal, Warning - Electrical

7 27442.0000 2 Decal, Warning - Moving Parts

8 39889.0000* 1 Panel, Top

02335.0001 4 Screw, Hex Head Crimptite #8-32 x .38"

9 00927.0000 2 Clip, Spring

10 40010.1001 1 Panel W/Decals, Left Side - SST (Includes items 7,11,12 & 25)

40010.1003 1 Panel W/Decals, Left Side - BLK (Includes items 7,11,12 & 25)

32580.0000 2 Screw, Hex Head #6-32 x .25"

11 40561.0000 1 Schematic, Electrical

12 29959.0002 1 Decal, Cleaning Instructions

13 39887.0003* 1 Chassis

14 20622.0005 1 Bushing

15 26528.0000 4 Leg, Black Plastic - 4" Adj. (See item 28)

16 03996.0000 4 Pad, Rubber - 4" Adj. Legs (See item 28)

17 39892.0001* 1 Bracket

02335.0001 4 Screw, Hex Head Crimptite #8-32 x .38"

18 21436.0000 2 Catch, Magnetic

19 39893.1000 1 Panel, Front - SST (Includes items 20 & 21)

39893.1001 1 Panel, Front - BLK (Includes items 20 & 21)

02308.0000 2 Screw, Pan Head Serrated #8-32 x .375"

20 29967.0001 1 Gasket, Electronic Box

21 39897.0000 1 Membrane Switch

22 39917.1000 1 Drip Tray Kit - WHI (Includes items 23 & 24)

39917.1001 1 Drip Tray Kit - BLK (Includes items 23 & 24)

23 35607.0000* 2 Strike Assy, Self Adhesive

(Continued)

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

40562 040110

CHARGE

Type R404A, Amount ?? oz

Design Pressures: High ??? Low ??

10 25 11

9 8

HOUSING, PANELS AND DRIP TRAYS

(Continued)

ULTRA - 1

7 12

14 15 16

13 26

23 22 24

5 6 7

P3943

40562 040110

HOUSING, PANELS AND DRIP TRAYS

ITEM PART NO. QTY. DESCRIPTION

24 39725.0000 1 Cover, Drip Tray - WHI

39725.0001 1 Cover, Drip Tray - BLK

25 32162.0001 1 Decal, Coolant Charge

26 02308.0000 2 Screw, Pan Head Serrated #8-32 x .375"

00970.0000 2 Nut, KEPS #8-32

27 12421.1001 - Tube, Clear Vinyl (12" Long)

12421.1002 - Tube, Clear Vinyl (60" Long)

28 13255.0003 - Leg Kit, 4" Adj. Legs (Includes 4 Legs and Pads)

Not Illustrated

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

40562 020408

HOPPER, COVER AND FAUCET

ULTRA - 1

MODELS w/Flat Lid

P3944

40562 040110

+ 18 hidden pages