Bunn Coffee Maker TWF Parts List

BUNN
®
TW
TWF
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
32329.0000 11/02 ©1999 Bunn-O-Matic Corporation www.bunnomatic.com
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specified below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are
not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/ or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
2
32329 070102
TABLE OF CONTENTS
Electrical and Operating Controls............................................................................................................ 18
Faucet ...................................................................................................................................................................................... 16
Funnel Assembly .................................................................................................................................... 22
Numerical Index...................................................................................................................................... 24
Strainer/Flow Control, Solenoids and Lines ............................................................................................ 12
Tank Assembly .................................................................................................................................... 8,10
Top Cover, Hood, Trunk, Base and Panels ................................................................................................ 4
MODELS COVERED IN THIS MANUAL
TW - Brewers without Faucet
TW - 120V, Standard Height (4.64" extention)
TW - 120V, 23" Height (8.12" extention)
TW - 120V, 23" Height with 1/2 Batch Option
TW - 120/208V, Standard Height (4.64" extention)
TW - 120/208V, 23" Height (8.12" extention) with 90oz. Concentrate Option
TWDB - 200V, 3500W
TWF - Brewers with Faucet
TWF - 120V, Standard Height (4.64" extention)
TWF - 120V, Standard Height with Optional Rear Receptacle
TWF - 120V, 23" Height (8.12" extention)
TWF - 120V, Standard Height with 1/2 Batch Option
TWF - 120V, 23" Height with 1/2 Batch Option
TWF - 120V, 23" Height (8.12" extention) with 90oz. Concentrate Option
TWF - 120/208V, Standard Height (4.64" extention)
TWF - 120/208V, 23" Height (8.12" extention)
TWF - 120/208V, Standard Height with 1/2 Batch Option
3
32329 120100
BUNN
15
®
TOP COVER, HOOD, TRUNK, BASE AND PANELS
TW
TWF
25
1
2
3
4
18
19
16
23
14
13
9
Early Model Guide Brackets
18
20
5
6
21
22
7
8
17
9
11
9
10
12
P2017.40
4
32329 080701
TOP COVER, HOOD, TRUNK, BASE AND PANELS
ITEM PART NO. QTY. DESCRIPTION
1 03423.0000 1 Cover, Top (Also order items 2 & 25)
01382.0000 4 Screw, Truss Head #6-32 x .375"
2 10502.0000 1 Schematic, Electrical 120V
10502.0003 1 Schematic, Electrical 200V (TWDB)
3 21836.0000 1 Hood (Includes item 4)
21836.0001 1 Hood (Includes Item 4)(TWDB)
02308.0000 6 Screw, Pan Head - Serrated #8-32 x .375"
4 20268.0000 1 Decal, Hood-Switch
20268.0007 1 Decal, Hood-Switch (Models with Ready Light)
5 03762.0003 1 Trunk Assy (Also order items 19,21 & 22; if applicable)
00970.0000 6 Nut, Hex Keps #8-32
6 03773.0000 1 Housing, Nozzle Mounting
00970.0000 2 Nut, Hex Keps #8-32
7 03765.0005 1 Housing Assy, Trunk Extension 4.64" HT
03765.0003 1 Housing Assy, Trunk Extension 8.12" HT
00970.0000 6 Nut, Hex Keps #8-32
8 03770.0000 1 Bracket, Stop
01315.0000 2 Screw, Truss Head #8-32 x .375"
9 03772.0000 2 Guide, Base (Early models)
32035.0000 1 Guide, Base (Left side)
32035.0001 1 Guide, Base (Right side)
01317.0003 6 Screw, Truss Head-Locking #8-32 x .375"
10 03767.0002 1 Base
11 00668.0000 1 Plug, Hole .75" Dia
12 25137.0001 4 Foot, .75" O.D. x .48" HT (See item 24)
13 03771.0004 1 Cover, Trunk Extension - Rear 4.64" HT (120V)
20910.0000 1 Cover, Trunk Extension - Rear 4.64" HT (120/208V)
03771.0003 1 Cover, Trunk Extension - Rear 8.12" HT (120V)
20910.0002 1 Cover, Trunk Extension - Rear 8.12" HT (120/208V)
01315.0000 4 Screw, Truss Head #8-32 x .375"
00917.0000 4 Fastener, J-Type #8-32
14 22297.0001 1 Panel W/Decals, Trunk (120V) (Includes items 15 & 16)
25615.0000 1 Panel W/Decals, Trunk (120/208V)(Includes items 15 & 16)
25615.0001 1 Panel W/Decals, Trunk (120/208V)(Includes items 15,16 & 23)(Models with Rear Receptacle)
01315.0000 6 Screw, Truss Head #8-32 x .375"
00917.0000 6 Fastener, J-Type #8-32
Late models
15 00831.0000 1 Decal, Electrical Warning
16 00656.0000 1 Decal, Comply With Plumbing Code
17 02319.0000 2 Nut, Acorn #6-32
01510.0000 2 Lockwasher, External Tooth #6
01308.0000 2 Screw, Truss Head #6-32 x .25"
(Continued)
5
32329 111502
BUNN
15
®
TOP COVER, HOOD, TRUNK, BASE AND PANELS
(Continued)
TW
TWF
25
1
2
3
4
18
19
16
23
14
13
9
Early Model Guide Brackets
18
20
5
6
21
22
7
8
17
9
11
9
10
12
P2017.40
6
32329 080701
TOP COVER, HOOD, TRUNK, BASE AND PANELS
ITEM PART NO. QTY. DESCRIPTION
18 00669.0003 2 Plug, Hole .437" Dia (Brewers W/Out Faucet)
19 03537.0000 1 Decal, USE QUICK BREW FUNNEL
20 05749.0001 1 Plug, Nylon-Black .625" Dia. (120/208V Models only)
21 27294.0000 1 Decal, CLEANING AND SANITIZING
22 27294.0001 1 Decal, CLEANING AND SANITIZING (Spanish)
23 02822.0000 1 Decal, AUXILLARY OUTLET (Models with Rear Receptacle)
24 24600.0000 - Kit, Foot (Includes four feet)
25 32540.0000 1 Decal, Batch Set (Digital Timer, Late Models)
7
32329 080701
BUNN
®
TANK ASSEMBLY W/OUT FAUCET
6 17 18 7 8 9
TW
TWF
4
19
21
20
12
14
13 5
10
11
15
16
2
22
1
23
ON
3
OFF
Y
I
L
T
A
24
25
P1372
8
32329 120100
Loading...
+ 16 hidden pages