Bunn Coffee Maker TU3Q-EZ Parts Diagram

BUNN

TU3Q-EZ

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifications, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

WARRANTY

Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects in material and workmanship existing at the time of manufacture and appearing within one year from the date of installation. In addition:

1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and

workmanship for two years from the date of installation.

2.) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material

and workmanship for two years from the date of installation.

3.) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory

screen sieve analysis for three years from date of installation or for 30,000 pounds of coffee, whichever comes first.

This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that, in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are

not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND.

In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

29459 082300

TABLE OF CONTENTS

Electrical and Operating Controls ................................................................................................................................................ 12

Funnel Assembly ......................................................................................................................................................................... 14

Numerical Index .......................................................................................................................................................................... 16

Strainer/Flow Control, Solenoids and Lines .................................................................................................................................. 8

Tank Assembly .............................................................................................................................................................................. 6

Top Cover, Hood, Trunk, Base and Panels .................................................................................................................................... 4

29459 082300

BUNN

TOP COVER, HOOD, TRUNK, BASE AND PANELS

TU3Q-EZ

P1805.40

29459 031599

TOP COVER, HOOD, TRUNK, BASE AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 03423.1003 1 Cover W/Decals, Top (Includes item 2, 20 & 21)

01382.0000 4 Screw, Truss Head #6-32 x .375"

2 29332.0000 1 Schematic, Electrical 120V

3 03381.0002 1 Hood (Also order item 4)

02308.0000 6 Screw, Pan Head - Serrated #8-32 x .375"

4 03363.0005 1 Decal, Hood-Switch

5 03762.0001 1 Trunk Assy (Also order items 17 & 18)

00970.0000 6 Nut, Hex Keps #8-32

6 03773.0000 1 Housing, Nozzle Mounting

00970.0000 2 Nut, Hex Keps #8-32

7 03765.0003 1 Housing Assy, Trunk Extension 8.125" HT (See item 24)

00970.0000 6 Nut, Hex Keps #8-32

8 03770.0000 1 Bracket, Stop

01315.0000 2 Screw, Truss Head #8-32 x .375"

9 03772.0000 2 Guide, Base

01317.0003 6 Screw, Pan Head - Locking #8-32 x .375"

10 03767.0000 1 Base

11 00668.0000 1 Plug, Hole .75" Dia

12 25137.0001 4 Foot, .75" O.D. x .44" HT (See item 22)

13 03771.0003 1 Cover, Trunk Extension - Rear 8.125" HT (See item 24)

01315.0000 4 Screw, Truss Head #8-32 x .375"

00917.0000 4 Fastener, J-Type #8-32

14 25615.0000 1 Panel W/Decals, Trunk (Includes items 15 & 16)

01315.0000 6 Screw, Truss Head #8-32 x .375"

00917.0000 6 Fastener, J-Type #8-32

15 00831.0000 1 Decal, Electrical Warning

16 00656.0000 1 Decal, Comply With Plumbing Code

17 27294.0000 1 Decal, Service, Cleaning & Sanitizing

18 27294.0002 1 Decal, Service, Cleaning & Sanitizing (Spanish)

19 -------------- 1 Edging, 2" LG (Order item 23)

20 29167.0000 1 Decal, Brew Temperature Lockout

21 29206.0001 1 Decal, Diagnostic

22 24600.0000 - Kit, Foot (Includes four feet)

23 02712.1000 - Edging, 18" LG

24 03760.0003 - Trunk Extension Kit, 8.125" HT (Includes items 7, 13 & Hardware)

29459 082300

+ 11 hidden pages