Bunn Coffee Maker G9 HD Parts List

G9 HD

G9T HD

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁcations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as speciﬁed below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes ﬁrst. These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

BrewWISE, BrewLOGIC, BrewMETER, BrewWIZARD, Bunn Gourmet, BUNN Gourmet Ice, BUNN Pour-O-Matic, BUNN, Bunn-OMatic, Bunn-O-Matic, BUNNlink, BUNNserve, BUNNSERVE, BUNN Espress, Cool Froth, DBC, Dr. Brew, Dual, EasyClear, EasyGard, Easy Pour, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, IMIX, Infusion Series, Intellisteam, Quality Beverage Equipment Worldwide, The Mark of Quality in Beverage Equipment Worldwide, My Café, PowerLogic, Safety-Fresh, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, System III, ThermoFresh, 392, AutoPOD, AXIOM, Beverage Proﬁt Calculator, Beverage Bar Creator, BUNNsource, Coffee At Its Best, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Proﬁts, Pulse Wave, Signature Series, Smart Heat, Tea At Its Best, The Horizontal Red Line, Titan, Ultra, are either trademarks or registered trademarks of Bunn-O-Matic Corporation.

28028 012609

TABLE OF CONTENTS

TITLE PAGE NO.

Electrical Controls .............................................................................................................................................12

Hopper & Lid Assy ..............................................................................................................................................8

Housing, Base and Panels ..................................................................................................................................4

Motor, Burr Housing and Mounting Plate ..........................................................................................................10

Numerical Index ................................................................................................................................................16

28028 051800

BUNN

UTION

HOUSING, BASE AND PANELS

G9 HD

G9T HD

29 30 31

EARLY G9T HD MODELS

32 33 34

LATE G9T HD MODELS

P1291

28028 113007

HOUSING, BASE AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 05844.1000 1 Rear Panel W/Decal (Includes items 2 & 3)

01315.0000 8 Screw, Truss Head #8 - 32 x .38"

02322.0002 8 Screw, Truss Head (BLK) #8 - 32 x .38"

2 20545.0000 1 Decal, Warning Electrical

3 37881.0000 1 Decal, No Serviceable Parts

4 24237.0000 1 Decal, Notice - Interface Voltage

5 25407.0000 1 Housing Assy W/Decals (G9 HD 120V)

25407.0001* 1 Housing Assy W/Decals (G9 HD 240V)

25408.0000 1 Housing Assy W/Decals (G9T HD 120V)

25408.0001* 1 Housing Assy W/Decals (G9T HD 240V)

25407.0005 1 Housing Assy W/Decals (BLK)(G9 HD 120V)

6 05809.0000 1 Base (G9 HD) (Shown)

05809.0002 1 Base (G9 HD)(BLK) (Shown)

05752.0000 1 Base (G9T HD)

02311.0000 6 Screw, Hex Crimptite 10 - 32 x .50"

7 05816.0000 1 Pad, Base

Includes items 3, 18, 19 & 3 of item 21. Also order item 14

8 21619.1000 1 Panel Assy W/Decals (120V) (G9 HD)

21619.1008 1 Panel Assy W/Decals (BLK)(120V) (G9 HD)

21619.1003 1 Panel Assy W/Decals (120V) (G9T HD)

21619.1009 1 Panel Assy W/Decals (BLK)(120V) (G9T HD)

21619.1002 1 Panel Assy W/Decals (240V) (G9 HD)

21619.1005 1 Panel Assy W/Decals (240V) (G9T HD)

01380.0000 2 Screw, Truss Head #6 - 32 x .50"

01382.0002 2 Screw, Truss Head (BLK) #6 - 32 x .50"

01518.0000 2 Washer, Screw Retaining #6

9 10173.0000 1 Schematic 120V

10 05876.0000 1 Decal, Caution

11 21620.1000 1 Cover Assy W/Decal (Includes screws and washers below and item 11 & 12)

21620.1011 1 Cover Assy W/Decal (BLK) (Includes screws and washers below and item 11 & 12)

01380.0000 2 Screw, Truss Head #6 - 32 x .50"

01518.0000 2 Washer, Screw Retaining #6

01382.0002 2 Screw, Truss Head (BLK) #6 - 32 x .50"

12 33735.0002 1 Decal, Ground Fresh

13 10239.0000 1 Label, Timer Setting

14 24239.0002 1 Decal, Control Panel (Grinders with Single Set)

24239.0003 1 Decal, Control Panel (Grinders with Multi Set Option) (Shown)

24239.0004 1 Decal, Control Panel (Grinders with Half Batch Option)

Includes screws and washers below and items 9 & 10

Includes screws and washers below and item 10

15 05827.0000 1 Plate, Switch Shield

02308.0000 2 Screw, Pan Head #8 - 32 x .38"

16 05839.0000 2 Funnel Rail

02308.0000 4 Screw, Pan Head #8 - 32 x .38"

(Continued)

28028 113007

+ 11 hidden pages