Bunn Coffee Maker FMD DBC-3 Parts Diagram

FMD-3

FMD DBC-3

FMDA DBC-3

S/N FMD0013000 - UP

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁ cations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

www.bunn.com

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as speciﬁ ed below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes ﬁ rst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁ ce Box 3227, Springﬁ eld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modiﬁ cations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁ ed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁ ts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

29171 060702

TABLE OF CONTENTS

TITLE PAGE NO.

Auger Drive and Hopper Assembly ..............................................................................................................................................12

Covers, Panels and Drip Tray .........................................................................................................................................................4

Dispense Valves and Lines ........................................................................................................................................................... 20

Door, Lamp, Dispense Switches and Panels .................................................................................................................................. 8

Electrical Controls ........................................................................................................................................................................ 22

Mixing/Whipper Chambers and Drive Motor ................................................................................................................................ 14

Numerical Index ........................................................................................................................................................................... 26

Strainer, Solenoid, Fill Valve and Lines ......................................................................................................................................... 18

Tank, Heater and Overﬂ ow Protection .......................................................................................................................................... 16

29171 100499

23 24 35

COVERS, PANELS AND DRIP TRAY

2 1 3

Stainless Steel Covers

4 25 5

FMD-3

FMD DBC-3

FMDA DBC-3

22 21 20

DISPENSERS W/HOT

WATER VALVE

19 17 18 16

EARLY MODEL DISPENSERS

W/OUT DIGITAL TOUCH

27 9

CONTROL

11 13 12 14 15

P1627.28

29171 032206

COVERS, PANELS AND DRIP TRAY

ITEM PART NO. QTY. DESCRIPTION

1 26504.0000 4 Hinge

02308.0000 12 Screw, Pan Head #8-32 x .375”

2 28671.0000 1 Cover, Top Rear - SST

02308.0000 2 Screw, Pan Head #8-32 x .375”

3 28670.0000 1 Cover, Top Front - SST

4 28209.1000 1 Housing W/Decals - BLK (Includes items 23 & 24)

28661.1000 1 Housing W/Decals - SST (Includes items 23 & 24)

28661.1002 1 Housing W/Decals - SST (Includes items 23, 24 & 33) (230V “A” Model Dispensers)

5 33886.0001 1 Panel, Right

01311.0001 4 Screw, Truss Head - Locking #8-32 x .25”

6 28270.0000 1 Panel, Whipper Motor Mounting (Also order items 7, 8, one of item 9 & 28 - dispensers w/out cold water option, 7, 8, one of item 9, 27 & 28 - dispenser w/cold water option and 7, 8, 9 - dispensers w/digital touch control)

28270.0001 1 Panel, Whipper Motor Mounting (Also order items 7, 8 & 9) (Used on dispensers with Hot water Valve)

00991.0000 6 Nut, Elastic Lock #8-32

7 26524.0000 1 Decal, Tank Heater Switch

8 26523.0000 1 Decal, Rinse/Run Switch

9 00619.0010 2 Plug, Hole .437” Dia (Not used on soup dispensers or dispensers w/cold water option) (One less used on dispensers w/out digital touch control)

10 28366.0000* 2 Gasket, Foam W/Adhesive 10.1” LG (Order item 33)

11 29243.0000 1 Panel W/Decal, Lower Front Access (Includes item 30) (Dispensers w/out digital touch control)

29243.0001 1 Panel W/Decal, Lower Front Access (Includes item 30) (Dispensers w/digital touch control)

29243.0002 1 Panel W/Decal, Lower Front Access (Includes item 30) (Dispensers w/digital touch control and hot water valve)

01311.0000 2 Screw, Truss Head #8-32 x .25”

12 28436.0000 1 Panel W/Decal, Splash (Includes item 13) (Dispensers w/out digital touch control)

28436.0003 1 Panel W/Decal, Splash (Includes item 13) (Dispensers w/digital touch control)

28436.0004 1 Panel W/Decal, Splash (Includes item 13) (Dispensers w/hot water valve)

01311.0001 2 Screw, Truss Head - Locking #8-32 x .25”

13 - - - - - - - - 1 Decal, Caution-Hot Liquid & Cup Placement (Early models, order late model decal)

29216.0002 1 Decal, Caution-Hot Liquid & Cup Placement (Late models)

29216.0000 1 Decal, Caution-Hot Liquid & Cup Placement (Dispensers w/digital touch control)

29216.0001 1 Decal, Caution-Hot Liquid & Cup Placement (Dispensers w/digital touch control and w/hot water valve)

Dispensers w/out digital touch control

14 28267.0000 1 Cover, Drip Tray

15 28268.0000 1 Drip Tray

16 33886.0000 1 Panel, Left

01311.0001 4 Screw, Truss Head - Locking #8-32 x .25”

(Continued)

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

29171 032206

23 24 35

COVERS, PANELS AND DRIP TRAY

(Continued)

2 1 3

Stainless Steel Covers

4 25 5

FMD-3

FMD DBC-3

FMDA DBC-3

22 21 20

DISPENSERS W/HOT

WATER VALVE

19 17 18 16

EARLY MODEL DISPENSERS

W/OUT DIGITAL TOUCH

27 9

CONTROL

11 13 12 14 15

P1627.28

29171 032206

COVERS, PANELS AND DRIP TRAY

ITEM PART NO. QTY. DESCRIPTION

17 26528.0000 4 Leg, 4.0” Adjustable (Also see item 34)

18 03996.0000 4 Pad, Rubber 1.25” Dia. (Also see item 34)

19 23164.0002 1 Plug, Hole 1.50” Dia. - BLK

00619.0011 1 Plug, Hole 1.50” Dia. - SST

20 28206.0000 1 Cover, Left Side Access - BLK (Also order item 21)

28668.0000 1 Cover, Left Side Access - SST (Also order item 21)

01311.0003 2 Screw, Truss Head - BLK #8-32 x .25”

01311.0000 2 Screw, Truss Head - SST #8-32 x .25”

21 28368.0000 1 Decal, Thermostat Adjustment (Dispensers with mechanical thermostat)

22 28206.0000 1 Cover, Rear Access - BLK

28684.0000 1 Cover, Rear Access - SST

01311.0003 2 Screw, Truss Head - BLK #8-32 x .25”

01311.0000 2 Screw, Truss Head - SST #8-32 x .25”

23 00831.0000 1 Decal, Warning-Electrical

24 00656.0000 1 Decal, Comply to Plumbing Code

25 21436.0000 2 Catch, Magnetic

26 01311.0001 4 Screw, Truss Head - Locking #8-32 x .375”

27 26522.0000 1 Decal - HOT/COLD (Models w/cold water option)

28 28872.0000 1 Decal - INCREASE/DECREASE (Dispensers w/out digital touch control)

26523.0000 1 Decal - RINSE/RUN (Dispensers w/digital touch control and hot water valve)

29 28910.0000 2 Bracket Kit, Cover Retainer (Includes two brackets) (Optional)

30 28874.0000 1 Schematic, 120V, 120/208V & 120/240V (Dispensers w/out digital touch control)

29218.0000 1 Schematic, 120V, 120/208V & 120/240V (Dispensers w/digital touch control)

29218.0002 1 Schematic, 120V (Dispensers w/digital touch control & hot water valve)

-------------- - Schematic, 230V (230V “A” Model dispensers)

31 37724.1001 1 Cover, Top - BLK (Includes item 32)

32 38053.0000 2 Bracket

01311.0003 4 Screw, Truss Head #8-32 x .38”

33 28366.1000 - Gasket, Foam W/Adhesive - 12” LG

28366.1001 - Gasket, Foam W/Adhesive - 36” LG

28366.1002 - Gasket, Foam W/Adhesive - 120” LG

34 13255.0003 - Kit, Leg 4.0” Adjustable (Includes 4 each of items 17 & 18)

35 -------------- - Label, CE Conformity (230V “A” Model dispensers only)

Not Illustrated

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

29171 032206

DOOR, LAMP, DISPENSE SWITCHES AND PANELS

14 15 10 13 12

FMD-3

FMD DBC-3

FMDA DBC-3

1 2 3 4 5

9 13 6 19

DISPENSERS W/DIGITAL TOUCH

CONTROL

HOT

DISPENSERS W/ HOT

WATER VALVE

P1628.40

29171 051104

DOOR, LAMP, DISPENSE SWITCHES AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 28147.1000 1 Door W/Decal (Includes items 2 and 18) (Dispensers w/out digital touch control)

28147.1002 1 Door (Includes item 18) (Dispensers w/digital touch control)

01390.0000 4 Screw, Round Head #8-32 x .625”

01522.0000 4 Washer, Flat .203 I.D. x .50 O.D.”

00991.0000 4 Nut, Elastic Stop #8-32

2 28301.0003 1 Decal, Door Front (Dispensers w/out digital touch control)

3 38031.0001 1 Window, Door - Inside

02336.0000 2 Screw, Truss Head #4-40 x .375”

4 28362.0000 1 Display, Graphics (Cafe Scene)

28682.0000 1 Display, Graphics (Soup)

5 38031.0000 1 Window, Door - Outside

6 -------------- 1 Hinge, Door (See Covers, Panels and Drip Tray)

7 26892.0000 1 Plate, Strain Relief

8 26444.0000 2 Bushing, Strain Relief

9 28325.0000 1 Socket W/Terminals, Starter

10 27619.0000 1 Starter, Lamp

11 28261.0000 1 Panel, Door - Lower (Also order item 21)

01383.0001 5 Screw, Pan Head #6-32 x .375”

12 26239.0000 1 Lamp, Fluorescent - 8 Watts

13 28322.0000 2 Lamp Holder, Fluorescent

02328.0002 2 Screw, Pan Head #6 - 32 x .188”

14 28332.1000 1 Panel W/Decal, Door - Upper (Includes item 15)

01383.0001 5 Screw, Truss Head #6 - 32 x .25”

15 28870.0000 1 Decal, Cleaning

16 28335.0000 2 Clip, Ground

17 28296.0000 3 Switch Assembly, Dispense (Dispensers w/out digital touch control)

18 27298.0000 1 Strike, Self Adhesive (Prior to S/N FMD0017786)

29448.0000 1 Strike, Door

21716.0000 2 Screw, Flat Head #6 - 32 x .25”

19 12517.0001 1 LED W/Terminals (Dispensers w/out digital touch control)

25292.0000 1 Lockwasher M6

34130.0000 1 Nut M6

S/N FMD0017786 and up

20 28543.0000 1 Switch, Digital Touch Control

28543.0003 1 Switch, Digital Touch Control (Used in dispensers with Hot Water Valve)

21 29308.0000 1 Decal, Hopper Installation

(Continued)

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

29171 032206

+ 18 hidden pages