How it Works
Bunn Coffee Maker
Loading...
FMD-1
Installation Manual
8 pgs1.2 Mb0
Parts Diagram
22 pgs558.9 Kb0
Service Manual
71 pgs7.93 Mb0
Parts List
29 pgs1.27 Mb0

Bunn Coffee Maker FMD-1 Parts List

RELEASE BUTTON
WHEN CUP IS
2/3 FULL
PLACE
CUP HERE
PUS
H a
D BUTTON UNTIL CUP
IS 2/3 FULL, THEN RELEASE
RELEASE BUTTON
WHEN CUP IS 2/3 FULL
PLACE
CUP HERE
PLACE
CUP HERE
PUSH and
HOLD BUT
TON UNT
IL CUP
IS 2/3 FULL, THEN
RELEASE
FMD-1 FMD-2
S/N FMD0013000 - UP
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
29113.0000H 05/11 ©1998 Bunn-O-Matic Corporation
PHONE: (217) 529-6601 FAX: (217) 529-6644
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specified below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN
are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
392, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Profit Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Profits, Signature Series, Tea At Its Best, Phase Brew, The Horizontal Red Line, trifecta, Ultra, Velocity Brew are either trademarks or registered trademarks of Bunn-O-Matic Corporation.
2
29113 050511
TABLE OF CONTENTS
TITLE PAGE NO.
Auger Drive and Hopper Assembly - FMD-1 ...............................................................................................12
Auger Drive and Hopper Assembly - FMD-2 ...............................................................................................14
Covers, Panels and Drip Tray ........................................................................................................................4
Dispense Valve and Lines............................................................................................................................22
Door, Lamp, Dispense Switch and Panels .....................................................................................................8
Electrical Controls - FMD-1 .........................................................................................................................24
Electrical Controls - FMD-2 .........................................................................................................................26
Fill Valve and Lines......................................................................................................................................20
Mixing/Whipper Chambers and Drive Motor ...............................................................................................16
Numerical Index ..........................................................................................................................................28
Tank, Heater and Overflow Protection .........................................................................................................18
3
29113 012508
RELEASE BUTT
ON WH
EN CUP IS 2
/3 FULL
PLACE
CUP HERE
RELEASE BUTTON
WHEN CUP IS 2/3 FULL
PLACE
CUP HERE
PLACE
CUP HERE
To
reduce
the risk o
f electri
c sh
ock,
do
n
ot
remo
ve or
open co
ver.
N
o
user-servi
ceable parts
inside.
A
u
t
ho
ri
zed servi
ce personnel on
l
y.
D
i
sco
nnect power before servicin
g.
T
o reduce the
risk
of el
ectric
shock,
do not
remove or open
cover.
No user-serviceab
le p
arts i
nside.
Authorized
service
perso
nn
el
only.
Disconnect p
ower
before servicing
.
To
reduce the
risk
of el
ectric shoc
k,
do not remove or open cover.
No
user
-se
rvice
able parts inside.
A
uthori
z
ed
service perso
nn
el
on
ly.
D
isc
on
nect
pow
er before servicing.
26 10 28
COVERS, PANELS AND DRIP TRAY
3 30 4
FMD-1 FMD-2
1 2
20
31
23 24
30
21 19 30 17 18 26
5 25 16 6
Early Models
29
7 8
22
9
31
7
27
10
11 31 12 13
8
10
11 9 22
FMD-2
4
12
13
14
15
P1615.35
29113 060509
COVERS, PANELS AND DRIP TRAY
ITEM PART NO. QTY. DESCRIPTION
1 29027.0001 2 Hinge, Left (Early Models)
02322.0002 8 Screw, Pan Head - BLK #8-32 x .375”
2 29027.0000 2 Hinge, Right (Early Models)
02322.0002 8 Screw, Pan Head - BLK #8-32 x .375”
3 28952.0001 1 Cover, Top Rear - BLK
02308.0000 2 Screw, Pan Head #8-32 x .375”
4 28954.0001 1 Cover, Top Front (Also order item 20)
5 29172.0000 1 Housing W/Decals (Includes items 23 & 24, also order item 28)
6 29939.0001 1 Panel, Right
01311.0001 2 Screw, Truss Head - Locking #8-32 x .25”
02322.0002 2 Screw, Pan Head - BLK #8-32 x .375”
7 28937.0000 1 Panel, Whipper Motor Mounting (Also order items 8 & 9) (FMD-1)
28937.0001 1 Panel, Whipper Motor Mounting (Also order items 8, 9 & 27) (FMD-2)
00991.0000 6 Nut, Elastic Lock #8-32
8 26524.0000 1 Decal, Tank Heater Switch
9 26523.0000 1 Decal, Rinse/Run Switch
10 -------------- 2 Gasket, Foam W/Adhesive (Order item 32)
11 29174.0000 1 Cover, Lower Front Access (Includes item 22) (FMD-1)
29174.0001 1 Cover, Lower Front Access (Includes item 22) (FMD-2)
01311.0003 2 Screw, Truss Head - BLK #8-32 x .25”
12 29173.0000 1 Panel W/Decal, Splash (Includes item 13) (FMD-1)
29173.0001 1 Panel W/Decal, Splash (Includes item 13) (FMD-2)
01311.0000 2 Screw, Truss Head #8 - 32 x .25”
13 28328.0004 1 Decal, Caution-Hot Liquid & Cup Placement (FMD-1)
28328.0005 1 Decal, Caution-Hot Liquid & Cup Placement (FMD-2)
14 28966.0000 1 Cover, Drip Tray
15 02571.0000 1 Drip Tray
16 34972.0000* 1 Panel, Left
01311.0001 2 Screw, Truss Head - Locking #8-32 x .25”
02322.0002 2 Screw, Pan Head - BLK #8-32 x .375”
17 26528.0000 4 Leg, 4.0” Adjustable (Also see item 33)
18 03996.0000 4 Pad, Rubber 1.25” Dia. (Also see item 33)
19 23164.0002 1 Plug, Hole 1.50” Dia. - BLK
20 28368.0001 1 Decal, Thermostat Adjustment (Invensys Thermostat)
28368.0003 1 Decal, Thermostat Adjustment (Cotherm Thermostat)
21 28941.0001 1 Panel, Rear Access
01311.0000 2 Screw, Truss Head #8 - 32 x .25”
(Continued)
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
5
29113 060509
RELEASE BUTT
ON WH
EN CUP IS 2
/3 FULL
PLACE
CUP HERE
RELEASE BUTTON
WHEN CUP IS 2/3 FULL
PLACE
CUP HERE
PLACE
CUP HERE
To
reduce
the risk o
f electri
c sh
ock,
do
n
ot
remo
ve or
open co
ver.
N
o
user-servi
ceable parts
inside.
A
u
t
ho
ri
zed servi
ce personnel on
l
y.
D
i
sco
nnect power before servicin
g.
T
o reduce the
risk
of el
ectric
shock,
do not
remove or open
cover.
No user-serviceab
le p
arts i
nside.
Authorized
service
perso
nn
el
only.
Disconnect p
ower
before servicing
.
To
reduce the
risk
of
el
ect
ric shoc
k,
do n
ot remove or open cover.
No user-se
rvice
able parts inside.
A
uth
ori
zed
service perso
nn
el only.
D
isc
on
nect pow
er before servicing
.
26 10 28
COVERS, PANELS AND DRIP TRAY
(Continued)
3 30 4
FMD-1 FMD-2
1 2
20
31
23 24
30
21 19 30 17 18 26
5 25 16 6
Early Models
29
7 8
22
9
31
7
27
10
11 31 12 13
8
10
11 9 22
12
13
14
15
FMD-2
6
P1615.35
29113 060509
COVERS, PANELS AND DRIP TRAY
ITEM PART NO. QTY. DESCRIPTION
22 29096.0000 1 Schematic, 120V, 120/208V & 120/240V (FMD-1)
29096.0001 1 Schematic, 120V, 120/208V & 120/240V (FMD-2)
23 00831.0000 1 Decal, Warning-Electrical
24 00656.0001 1 Decal, Comply to Plumbing Code
25 21436.0000 2 Catch, Magnetic
26 01311.0001 4 Screw,Truss Head - Locking #8-32 x .375”
27 28872.0000 1 Decal, Increase/Decrease (FMD-2)
28 27096.0000 1 Decal, Potentiometer Adjustment (FMD-1)
29 28910.0000 1 Bracket Kit, Cover Retainer (Includes two brackets) (Optional)
30 26504.0000 4 Hinge, Adjustable (Late Models)
02322.0002 16 Screw, Pan Head - BLK #8-32 x .375”
31 37881.0000 2 Decal, No Serviceable Parts
32 28366.1000 - Gasket, Foam W/Adhesive - 12” LG
28366.1001 - Gasket, Foam W/Adhesive - 36” LG
28366.1002 - Gasket, Foam W/Adhesive - 120” LG
33 13255.0003 - Kit, Leg 4.0” Adjustable (Includes 4 each of items 17 & 18 ) (Not Illustrated)
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
7
29113 051111
23
20
24
7 15 21 10 6 8
DOOR, LAMP, DISPENSE SWITCH AND PANELS
22 14
11
9
3 4 5 18 1
FMD-1 FMD-2
17
2 16
1
18
17
5
2
19
16
5
13
12
14
20
FMD-2
Early Models
8
P1616.60
29113 012508
DOOR, LAMP, DISPENSE SWITCH AND PANELS
ITEM PART NO. QTY. DESCRIPTION
1 29175.0000 1 Door W/Decals (Includes items 2, 17 and 18) (FMD-1)
29175.0001 1 Door W/Decals (Includes items 2, 17 and 18) (FMD-2)
2 28964.0000 1 Decal, Door Front (FMD-1)
28964.0001 1 Decal, Door Front (FMD-2)
3 29106.0000 1 Display, Graphic - Drink
29106.0001 1 Display, Graphic - Soup
4 28963.0000 2 Window, Door
00970.0000 2 Nut, Keps #8-32
5 -------------- - Hinge, Door (See Covers, Panels and Drip Tray)
6 26892.0000 1 Plate, Strain Relief
7 26444.0000 2 Bushing, Strain Relief
8 28325.0000 1 Socket W/Terminals, Starter 120V
40782.0000 1 Socket W/Terminals, Starter 230V
9 27619.0000 1 Starter, Lamp
10 28962.0000 1 Panel, Door - Lower 120V
40780.0000 1 Panel, Door - Lower 230V
01311.0000 4 Screw, Pan Head #8-32 x .250”
11 26239.0000 1 Lamp, Fluorescent - 8 Watts
12 28322.0000 2 Lamp Holder, Fluorescent (Early Models)
02328.0002 2 Screw, Pan Head #6 - 32 x .188”
13 29176.0000 1 Panel W/Decal, Door - Upper (Includes item 14 & 20) (FMD-1)(Early Models)
29176.0001 1 Panel W/Decal, Door - Upper (Includes item 14 & 20) (FMD-2) (Early Models)
01311.0000 2 Screw, Truss Head #8 - 32 x .25”
14 29161.0000 1 Decal, Cleaning (FMD-1)
29161.0001 1 Decal, Cleaning (FMD-2)
15 28335.0000 1 Clip, Ground
16 28296.1000 1 Switch Assembly, Dispense (One additional used on FMD-2 dispensers)
17 27298.0000 1 Striker Assy.
18 23279.0000 1 Decal, BUNN
19 12517.0001 1 L.E.D. W/Terminals (Not used on FMD-1)
25292.0000 1 Lockwasher M6
34130.0000 Nut M6
20 - - - - - - - - 2 Gasket, Foam W/Adhesive - 13.088” LG (Order item 28)
21 29308.0000 1 Decal, Hopper Installation
22 28960.0001 1 Panel, Upper (Late Models)
01311.0000 2 Screw, Truss Head #8 - 32 x .25”
23 27543.1005 1 Lampholder Assy, Upper (Late Models)
01308.0000 1 Screw, Truss Head #6-32 x .25”
24 27543.1006 1 Lampholder Assy, Lower (Late Models)
01308.0000 1 Screw, Truss Head #6-32 x .25”
The following items are not illustrated
25 28990.0000 1 Wiring Harness, Door Interconnect 120V (Includes item 6 & one of item 7) (FMD-1)
29119.0000 1 Wiring Harness, Door Interconnect 120V (Includes item 6 & one of item 7) (FMD-2)
(Continued)
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
9
29113 040208
Loading...
+ 20 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use