Bunn Coffee Maker ED-11-TL User Manual
ITE M#
19⁄
16 Car tri dge Ch ang eou t
233⁄
4
51⁄
16
23⁄
4
53⁄
16
17⁄
8
19⁄
16
Ca rtr idge Cha nge out
143⁄
16
51⁄
16
51⁄
16
Easy Clear® Drop-In (ED)
10” or 20” Systems
Features
Drop-In 10” (ED-11) & 20” (ED-12)
Water Quality Systems
• Provides 4,500 gallons @ .75 gpm (10”) or 9,000 gallons @ 1.5 gpm (20”) for
superior sediment, taste/odor and chlorine reduction.
• Perfect for beverage systems with a medium sized brewer (up to 50 lbs. of
coffee/week).
• Effective 10 micron graded density filtration.
• Provides six months of scale reduction and protects equipment from
corrosion.
• Has easy water shut-off valve built into manifold, plus the clear housing
makes it easy to see cartridges.
• Designed for minimum purge after cartridge charge.
• Single purpose cartridges also available for treatment of problems with taste
and odor (T), lime scale (L), hardness (H) and sediment filtration (S).
• System Tested and Certified by NSF International against ANSI/NSF
Standard 42 for the reduction of sediment, taste/odor, and chlorine.
PROJECT
DATE
Model ED-11-TL or ED-12-TL
Water Quality Systems
For current specification sheets and other information, go to www.bunn.com.
Related Products
Warranty: BUNN warrants the Easy Clear®
hardware (excluding cartridges) to be free
from defects in materials and workmanship
for 1 year from the date of installation.
See service manual for complete warranty
statement.
Gauge Kit for Drop-In systems
Product No. : 30236.1001
Wrench for Drop-In systems
Product No. : 30061.0000
Model Agency Listing
ED-11-TL
ED-12-TL
Alignment Post
Product No. : 29559.0000
ED-CON-2 Connector
Product No. : 30232.1000
ED-11
ED-12
3/06
F3
Dimensions & Specifications
Model Product # Flow Rate Replaces
Chlorine
Taste
Scale
& Capacity
Multipurpose Systems
ED-11-TL 30244.1001 .75 gpm/4,500 gals. 110-CP • • • •
ED-12-TL 30245.1001 1.5 gpm/9,000 gals. 120-CP • • • •
10” Cartridges
ED-TL-1 (1) 30231.1001 .75 gpm/4,500 gals. CP-10 • • • •
Case (36) 30231.0001
ED-T-1 (1) 30231.1002 .75 gpm/4,500 gals. C-10 • • •
Case (36) 30231.0002
ED-L-1 (1) 30231.1003 3.0 gpm/NA P12-10 • •
Case (12) 30231.0003
ED-H-1 (1) 30231.1004 .5 gpm/800 grains† WS-10 • •
Case (12) 30231.0004
ED-S-1 (1) 30231.1005 6.0 gpm/NA S5-10 •
Case (36) 30231.0005
20” Cartridges
20” CARTRIDGES INCLUDE TWO ED-TL-1 CARTRIDGES CONNECTED
WITH ONE ED-CON-2 CONNECTOR
ED-TL-2 (1) 30232.1001 1.5 gpm/9,000 gals. CP-20 • • • •
Case– Connect 2 ED-TL-1 (36) 30231.0001
with 1-ED-CON-2 (6) 30232.0000
ED-T-2 (1) 30232.1002 1.5 gpm/9,000 gals. C-20 • • •
Case– Connect 2 ED-T-1 (36) 30231.0002
with 1-ED-CON-2 (6) 30232.0000
ED-H-2 (1) 30232.1004 .5 gpm/1,600 grains† WS-20 • •
Case– Connect 2 ED-H-1 (12) 30231.0004
with 1-ED-CON-2 (6) 30232.0000
ED-S-2 (1) 30232.1005 12.0 gpm/NA n/a •
Case– (15) 30032.0002 12.0 gpm/NA S5-20*
Manifolds & Housing(s)
ED-11 (1) 30221.1000 NA 110
ED-12 (1) 30222.1000 NA 120
ED-21 (1) 30269.1000 NA 210
ED-22 (1) 30225.1000 NA 222
Sediment
†
To figure gallon capacity for an ED-H-1 & 2 use the following formula:
Grain capacity of cartridge ÷ water hardness (in grains) = gallons treated.
Applications For ED Systems
TL Sediment, Taste/Odor & Lime Scale
T Taste & Odor (Carbon)
* Does not fit in new ED-_-2 manifolds
3
Note: ED models include inlet and outlet valves with
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
⁄8” female pipe threading.
L Lime Scale (Scale Inhibitor)
H Hardness Treatment (Water Softener)
S Sediment Filtration
Loading...