Bunn Coffee Maker DUAL TF DBC Parts List

RELEASED FOR PRODUCTION

DUAL® TF DBC

W/SMART FUNNEL

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, speciﬁcations, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

DIR Num: 35060.0000 06, November 2014

RELEASED FOR PRODUCTION

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.

2) All other equipment - 2 years parts and 1 year labor plus added warranties as speciﬁed below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts and labor for 4 years or 40,000 pounds of coffee, whichever comes ﬁrst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Ofﬁce Box 3227, Springﬁeld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make

modiﬁcations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods speciﬁed above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost proﬁts, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

392, A Partner You Can Count On, Air Infusion, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, Intellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, Titan, trifecta, TRIFECTA (sylized logo), Velocity Brew, Air Brew, Beverage Bar Creator, Beverage Proﬁt Calculator, Brew better, not bitter., Build-A-Drink, BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer Control, Element, Milk Texturing Fusion, Nothing Brews Like a BUNN, Picture Prompted Cleaning, Pouring Proﬁts, Signature Series, Sure Tamp, Tea At Its Best, The Horizontal Red Line, Ultra are either trademarks or registered trademarks of Bunn-O-Matic Corporation. The commercial trifecta® brewer housing conﬁguration is a trademark of Bunn-O-Matic Corporation.

Revised 031314

DIR Num: 35060.0000 06, November 2014

RELEASED FOR PRODUCTION

TABLE OF CONTENTS

Base - Trunk - Hood - Covers & Panels ...................................................................................................................................... 4

Electrical Controls .................................................................................................................................................................... 22

Faucet ....................................................................................................................................................................................... 20

Funnel....................................................................................................................................................................................... 28

Inlet Valve and Line .................................................................................................................................................................. 16

Numerical Index ....................................................................................................................................................................... 30

Sprayhead Valve, Water By-Pass Valve and Sprayhead ............................................................................................................ 18

Strainer, Solenoid & Lines (Models with .25” Tubing) ............................................................................................................. 12

Strainer, Solenoid & Lines (Models with .38” Tubing) ............................................................................................................. 14

Tank and Mounting Brackets .................................................................................................................................................... 10

Tank Heater & Overﬂow Protection Devices ............................................................................................................................... 8

DIR Num: 35060.0000 06, November 2014

35060 063010

RELEASED FOR PRODUCTION

First Type Cover Plate

BASE - TRUNK - HOOD - COVERS & PANELS

1 2 3 4

DUAL TF

Optional Switch Guard

DIR Num: 35060.0000 06, November 2014

P2718.30

35060 083111

RELEASED FOR PRODUCTION

BASE - TRUNK - HOOD - COVERS & PANELS

ITEM PART NO. QTY. DESCRIPTION

1 34555.1001 1 Cover Assy, Top BLK (Includes item 2, 3 & 4) (120/240V)

34555.1002 1 Cover Assy, Top BLK (Includes item 2, 3 & 4) (120/240V 3 Phase)

34555.1003 1 Cover Assy, Top BLK (Includes item 2 & 3)

34555.1005 1 Cover Assy, Top BLK (Includes item 2 & 3) (Optional Switch Guard)

01308.0003 3 Screw, Truss Head BLK #6 - 32 x .25" Locking

2 37881.0000 4 Decal, "No Serviceable Parts"

3 25151.0000 2 Shield, Insulator

4 34916.0000 1 Schematic, 120/240V Single Phase

34916.0001 1 Schematic, 120/240V 3 Phase

34916.0003 1 Schematic, 120/240V Multi Phase 4 Wire

34916.0004 1 Schematic, 208/240V Multi Phase 3 Wire W/O Neutral

5 34550.1004 1 Hood SST (Includes item 6)

34550.1005 1 Hood BLK (Includes item 6)

02308.0000 19 Screw, Pn-Hd #8 - 32 x .375"

6 34802.0000 1 Switch, Membrane

7 34630.1000 1 Trunk W/Decals SST (Includes items 8 & 9)

34630.1001 1 Trunk W/Decals BLK (Includes items 8 & 9)

34630.1002 1 Trunk W/Decals SST 230V (Includes items 8, 9 & 23)

34630.1003 1 Trunk W/Decals BLK 230V (Includes items 8, 9 & 23)

8 00986.0000 1 Decal, Warning - Electrical

9 00656.0001 1 Decal, Comply to Plumbing Code

10 34953.1000 1 Panel W/Decals, Trunk SST (Includes items 2 & 11)

34953.1001 1 Panel W/Decals, Trunk BLK (Includes items 2 & 11)

01311.0000 9 Screw, Truss Head SST #8 - 32 x .25"

01311.0004 9 Screw, Truss Head BLK #8 - 32 x .25"

11 00658.0000 1 Decal, Caution - Decanter/Funnel

12 34603.1001 1 Cover W/Decal, Faucet BLK (Includes item 13 and 27)

01303.0002 2 Screw, Pn-Hd BLK #4 - 40 x .50"

13 36302.0000 1 Decal, Caution Hot Water

14 34920.0000 1 Support, Center SST

34920.0001 1 Support, Center BLK

34920.0004 1 Support, Center SST

34920.0005 1 Support, Center BLK

20631.0000 6 Screw, Pn-Hd .25"-20 x .75" (Early Units)

00970.0000 4 Nut, Keps #8-32 Zinc PL (Late Units)

15 34948.1000 2 Plate, Access SST (Includes item 2)

34948.1001 2 Plate, Access BLK (Includes item 2)

01308.0002 2 Screw, Truss Head SST #6 - 32 x .25" Locking

01308.0003 2 Screw, Truss Head BLK #6 - 32 x .25" Locking

Models Without Main Power Switch

Models With Main Power Switch

16 34613.0004 1 Base Housing SST

34613.0005 1 Base Housing BLK

34613.0008 1 Base Housing SST

34613.0009 1 Base Housing BLK

34613.0015 1 Base Housing SST (208/240V 3 Wire Multi Phase models)

34613.0016 1 Base Housing SST (120/208 - 120/240V 4 Wire Multi Phase models)

34613.0021 1 Base Housing SST (230/400V 3 Phase models)

02308.0000 13 Screw, Pan Head #8 - 32 x .375"

(continued)

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

Models with Inlet Valve mounted in Hood

Models with Inlet Valve mounted in Base

DIR Num: 35060.0000 06, November 2014

35060 110112

RELEASED FOR PRODUCTION

First Type Cover Plate

BASE - TRUNK - HOOD - COVERS & PANELS

1 2 3 4

DUAL TF

Optional Switch Guard

DIR Num: 35060.0000 06, November 2014

P2718.30

35060 083111

RELEASED FOR PRODUCTION

BASE - TRUNK - HOOD - COVERS & PANELS

ITEM PART NO. QTY. DESCRIPTION

17 26528.0000 5 Leg, 4.0" Plastic (See item 31)

00502.0000 5 Leg, 4.0" Metal (See item 31)

18 03996.0000 5 Pad, Anti Skid

19 03011.0000 1 Plug, Vent

20 35291.0000 1 Cover, Rear SST

35291.0001 1 Cover, Rear BLK

01347.0000 2 Screw, Truss Head #6 - 32 x .375" SST

01347.0002 2 Screw, Truss Head #6 - 32 x .375" BLK

21 36398.0000 1 Hole Plug, DB-9 (Early models)

3 Phase Brewers only

22 32649.0000 2 Cover Plate, Funnel Lock (Early models)

32649.0001 2 Cover Plate, Funnel Lock (Late models)

00970.0000 4 Nut, Keps #8-32

23 00824.0002 1 Decal, Ground

24 00619.0007 1 Plug, Hole .50" Dia. (SST models)

05749.0004 1 Plug, Hole .50" Dia. (Black models)

25 39803.0000 1 Decal, Main Switch (Models with Main Switch only)

26 38820.0000 1 Plate, Switch Hole Cover

01347.0000 2 Screw, Truss Head #6 - 32 x .375"

27 37881.0002 1 Decal, "No Serviceable Parts"

28 32323.1004 1 Guard Kit, Hinged Switch Cover (Includes items 29 and 30)

29 26504.0000 2 Hinge, Adjustable

01382.0003 8 Screw, Truss Head W/Nyl Patch #6 - 32 x .375" BLK

30 29384.0002 1 Channel, Hinge

31 13255.0007 - Leg Kit, Plastic (Includes 5 each of items 17 & 18) (Not illustrated)

13255.0002 - Leg Kit, Metal (Includes 5 each of items 17 & 18) (Not illustrated)

Models without Funnel Locks

Not used on 230V/400V models

Models Without Main Power Switch

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

DIR Num: 35060.0000 06, November 2014

35060 110112

RELEASED FOR PRODUCTION

TANK HEATER & OVERFLOW PROTECTION DEVICES

8 7 6 5 4 3

9 3 2 1 10 11 12

DUAL TF

25 26

Brewers W/Copper

Overﬂow Cup

DIR Num: 35060.0000 06, November 2014

P2616.50

35060 052813

RELEASED FOR PRODUCTION

TANK HEATER & OVERFLOW PROTECTION DEVICES

ITEM PART NO. QTY. DESCRIPTION

1 12398.0002 3 Gasket, Tank Heater

2 20922.1000 2 Tank Heater, 3300W @ 240V (Includes item 1) (1 additional for 3 phase brewers)

20922.1002 2 Tank Heater, 2850W @ 208V (Includes item 1) (200V Models)

12305.1000 2 Tank Heater, 4000W @ 208V (Includes item 1)

00908.0000 8 Nut, Hex #8 - 32 (4 additional for 3 phase brewers)

3 23717.0003 2 Thermostat, Limit (1 additional for 3 phase brewers)

00908.0000 4 Nut, Hex #8 - 32 (2 additional for 3 phase brewers)

4 02536.0000 3 Grommet .375" I.D.

5 20936.1000 1 Probe Kit (Includes items 6, 7 & 8)

6 01501.0000 1 Washer .164" I.D. x .375" O.D.

7 20203.0100 1 Lockwasher, Internal Tooth #8

8 00908.0000 1 Nut, Hex #8 - 32

9 34664.0000 1 Cover, Tank Heater

00908.0000 4 Nut, Hex #8 - 32

10 26622.0001 1 Tube Assy, Vent

11 02434.0010* 1 U-Channel 2.0" (Order item 28)

12 27473.0000 1 Bracket, Overﬂow Cup Mounting

13 03803.0000 1 Switch Assy, Liquid Level (120/208V, 120/240V & 240V models)

03803.0002 1 Switch Assy, Liquid Level (200V, 230V & 230/400V models)

04797.0000 1 Washer, Celcon .520" I.D. x 1.0" O.D.

00946.0000 1 Nut, Hex .125" FPT

14 03633.0000 2 Gasket, Float Switch (Only 1 used in this application)

15 01527.0000* 3 Washer, Adjusting (DO NOT USE IN THIS APPLICATION)

16 03807.0000 1 Clip, Spring

17 22728.0000 1 Overﬂow Cup Assy Copper (Second type) (Also replaces aluminum cup)

41259.1003 1 Kit, Overﬂow Cup (Aluminum) (Includes items 4, 20, 22 & 23)

00971.0000 2 Nut, Keps #10-32

18 12422.0000 2 Clamp, Hose .47"/.54" I.D.

19 03236.0023* 1 Tube, Silicone .312" I.D. x 27.5" (Order item 29)

20 04797.0000 1 Washer, Celcon .520” I.D. x 1.0” O.D.

21 00946.0000 1 Nut, Hex .125” FPT

Not used on 3 phase brewers

Includes items 14, 15 & 16

22 41280.0001 1 Elbow,.375” Multi Barb

23 41266.0000 1 Film, Insulating

24 21801.0002 1 Tube .375" O.D.

25 20541.0001 2 Heat Sink (Also order item 27) (Only 1 used on 120/208V 3 phase brewers)

01382.0007 4 Screw, Truss Head 6-32 x .38" (Only 2 used on 120/208V 3 phase brewers)

26 12565.0011 2 Triac Assy, 40 amp

02328.0003 2 Screw, Pan Head #6-32 x .312"

01520.0000 2 Lockwasher #6

27 M2522.1000 - Heat Sink Compound

28 02434.1000 - U-Channel 18.0" (Use as required)

29 03236.1001 - Tube, Silicone .312" I.D. x 36.0"

03236.1003 - Tube, Silicone .312" I.D. x 60.0"

03236.1002 - Tube, Silicone .312" I.D. x 120.0" 9

* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

Only 1 used on 120/208V 3 phase brewers

Not illustrated

35060 081512

DIR Num: 35060.0000 06, November 2014

RELEASED FOR PRODUCTION

TANK AND MOUNTING BRACKETS

Late Models

DUAL TF

DIR Num: 35060.0000 06, November 2014

P2617.45

35060 021808

+ 21 hidden pages