Bunn Coffee Maker DG-2 Parts Diagram
®
BUNN
DG-2
WDG-2
02328.0000(4)
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
10855.0000D 3/00 ©1995 Bunn-O-Matic Corporation
www.bunnomatic.com
WARRANTY
Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from defects
in material and workmanship existing at the time of manufacture and appearing within one year from the date of
installation. In addition:
1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and
workmanship for three years from the date of installation.
2.) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material
and workmanship for two years from the date of installation.
3.) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory
screen sieve analysis for three years from date of installation or for 30,000 pounds of coffee, whichever comes first.
This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that,
in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper
maintenance or repair, damage or casualty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR
ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are
not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn.
Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not
be relied upon.
The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217)
529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, the Buyer
shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole
discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge
for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during
the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the
equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE
OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS
SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND.
In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,
loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.
2
10855 091901
TABLE OF CONTENTS
Electrical Controls........................................................................................................................................................................ 12
Funnel Rails .................................................................................................................................................................................14
Hopper and Lid Assy ..................................................................................................................................................................... 6
Housing, Base and Panels ............................................................................................................................................................. 4
Motor, Burr Housing and Mounting Bracket ..................................................................................................................................8
Numerical Index .......................................................................................................................................................................... 18
Weigh Mechanism and Control Board - WDG-2 .......................................................................................................................... 16
3
10855 030700
BUNN
16
®
NEW
01315.0000(8)
HOUSING, BASE AND PANELS
DG-2
WDG-2
1
15
14
13
12
11
17
20545.0000
00917.0000(8)
00718.0000
24237.0000
2
3
01593.0000
4
5
6
01315.0000(4)
7
8
01518.0000(4)
01380.0000(4)
7
25701.0000
02311.0000(7)
4
5
6
25694.0000
9
10
WDG-2 MODELS
P700
4
10855 030700
HOUSING, BASE AND PANELS
ITEM PART NO. QTY. DESCRIPTION
* DG-2 Models
** WDG-2 Models
***
1 25917.0000 1 1 Housing Assy W/Decal (Includes items 2, 3 & 11)
2 05814.0001 3 3 Window Assy (Includes adhesive)
3 25729.0000 1 1 Decal, Control Panel
4 25910.0000 1 - Cover W/Decal (Includes screws and washers below and item 5)
25910.0001 - 1 Cover W/Decal (Includes screws and washers below and items 5 and 7)
01315.0000 4 4 Screw, Truss Head 8 - 32 x .375"
01516.0000 4 4 Washer, Screw Retaining #8
5 25730.0000 1 1 Decal, Operating Instructions
6 25753.1000 1 - Panel Assy W/Decal (Includes screws and washers below and items 7 and 8)
25721.0001 - 1 Panel, Trunk
01380.0000 4 4 Screw, Truss Head 6 - 32 x .50"
01518.0000 4 4 Washer, Screw Retaining #6
7 10856.0000 1 - Schematic, Electrical 120V
10874.0000 - 1 Schematic, Electrical 120V
8 25885.0000 1 - Decal, Coffee Wt/Timer Settings
9 25701.0000 1 1 Base Plate
01330.0000 7 7 Screw, Slotted Hex Head 10 - 32 x .375"
10 25694.0000 1 1 Pad, Base
11 24237.0000 1 1 Decal, Notice - Interface Voltage
12 00718.0000 1 1 Bushing, 1.125" Dia. Hole (Early Models)
01592.0001 1 1 Bushing, 1.187" Dia. Hole (Late Models)
13 01593.0000 1 1 Bushing, 1.50" Dia. Hole
14 25911.0000 1 1 Panel Assy W/Decal (Includes item 15)
01315.0000 8 8 Screw, Truss Head 8 - 32 x .375"
15 20545.0000 1 1 Decal, Warning Electrical
16 00917.0000 8 8 Clip, J - Type 8 - 32
17 26039.0001 - 1 Channel, Housing Support
01321.0000 - 2 Screw, Truss Head 8-32 x 1.0"
5
10855 030700
BUNN
®
HOPPER AND LID ASSEMBLY
02328.0000(4)
DG-2
WDG-2
1
2
00725.0000(2)
3
05876.0000(2)
4
25713.0000
01311.0001(10)
25718.0000
02328.0000(2)
25716.0000(2)
02328.0004(4)
5
6
P701
6
10855 030700
Loading...