Bunn Coffee Maker CWTFA-TS Service Manual

INTERNATIONAL
ITE M#
PROJECT
Thermal Server Coffee Brewer
Features
Thermal Server Coffee Brewer
• Brew capacity varies by model. See back for details.
• Brewer measures only 9” (22.9 cm) wide.
• Convenient thermal servers keep coffee hot and fresh for hours.
• Thermal servers are easily transported to remote meeting rooms, breakfast bars, etc.
• Pourover feature included on all models.
• Internal components are constructed from stainless steel.
• Hot water faucet on all models.
• SplashGard® funnel deflects hot liquids away from the hand.
• Holds up to 4” (10.2 cm) cup.
Model CWTF TS
with Thermal Server
(Thermal Server sold separately)
Dimensions: 27.6” H x 9” W x 18.5” D
(70.1cm H x 22.9cm W x 47cm D)
DATE
For current specification sheets and other information, go to www.bunn.com.
Related Products
Easy Clear® EQ-17-TL Product No. : 30200.1000
Easy Clear® ED-17-TL Product No. : 30201.1001
Thermal Server Booster*
Product No. : 18010.6000
*To be used in conjunction with Thermal Server without base. Product No. : 23300.0010 & 23300.0006
International models may vary in appearance.
Thermal Server-Black
Product No. : 23300.0007
Patents Apply
12/06
A3.10
Dimensions & Specifications
Model Product # Volts Amps Tank Heater Total Brewing Shipping Cord Agency Watts Watts Capacity Weight Attached
CWTFA-TS 23000.0023 230 9 2000 2100 5.7 gal./hr. 32 lbs. No (21.6 L/hr.) (14.6 kg) CWTFA35-TS 23000.0019 230 14.2 3200 3280 7.5 gal./hr. 32 lbs. No (28.4 L/hr.) (14.6 kg) CWTFA35-TS 23000.0031 220 13.6 2941 3000 7.5 gal./hr. 33.9 lbs No (28.4 L/hr.) (15.4 kg) CWTFB-TS 23000.0033 100 12.9 1250 1290 3.6 gal./hr. 33.9 lbs. Yes (13.6 L/hr.) (15.4 kg) CWTFB-TS 23000.0034 200 18 3500 3600 7.5 gal./hr. 33.9 lbs. No (28.4 L/hr.) (15.4 kg)
Brewing capacity: base on incoming water temp of 60˚F/15˚C (140˚F/60˚C rise) per 1/2 gallon.
Electrical: 230V model requires 2-wires plus ground service rated 220-240V, single phase, 50/60 Hz. 220V model requires 2-wires plus ground service rated 220-240V, single phase, 60 Hz. 100/200V model requires 2-wires plus ground service rated 220-240V, single phase, 60 Hz.
Plumbing: 20-90 psi (69-621 kPa). Supplied with
1
⁄4” male flare fitting.
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in centimeters. Bunn-O-Matic Corporation owns all copyrights relating to materials in this publication. Please contact BUNN to request permission to reproduce any portion of this publication.
Loading...