Bunn Coffee Maker CWT Parts Diagram

BUNN

CWT

CWTF

CWTF-MV

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifications, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

www.bunnomatic.com

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as specified below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

10789 070102

TABLE OF CONTENTS

Electrical and Operating Controls ..............................................................................................................................................30

Faucet and Tubing .................................................................................................................................................................... 28

Fill Basin ................................................................................................................................................................................... 14

Funnels and Filter Basket .......................................................................................................................................................... 38

Hood and Top Covers - SST and Black Decor Models...............................................................................................................10

Hood and Top Covers - Brass Models ...................................................................................................................................... 12

Numerical Index ........................................................................................................................................................................40

External Strainer, Flow Control, Solenoid and Lines..................................................................................................................22

Internal Strainer, Flow Control, Solenoid and Lines .................................................................................................................. 26

Tank and Components (Without Faucet) ...................................................................................................................................16

Tank and Components (With Faucet) ........................................................................................................................................18

Tank and Components (Model CWTF-MV) ................................................................................................................................ 20

Trunks and Panels - SST and Black Decor Models (One warmer base) ...................................................................................... 4

Trunks and Panels - SST and Black Decor Models (Two warmer base) ......................................................................................8

Trunk and Panels - Brass Models .............................................................................................................................................. 6

Warmer Assemblies ..................................................................................................................................................................36

10789 051900

BUNN

TRUNKS AND PANELS - SST AND BLACK DECOR MODELS W/ONE

WARMER BASE

CWT

CWTF

1 2 21

CWTF-MV Models

Brewers with Black Decor

Optional Legs

1 19

WARMERS AND SURFACES ARE HOT

CAUTION :

P650

10789 040201

TRUNKS AND PANELS - SST AND BLACK DECOR MODELS W/ONE WARMER BASE

ITEM PART NO. QTY. DESCRIPTION

1 25352.0000 1 Trunk W/Decals BLK Vinyl (Includes Items 16, 17, 18 & 20)

23320.1002 1 Trunk W/Decals BLK Painted (Includes Items 16, 17, 18 & 20)

25352.0001 1 Trunk W/Decals SST (Includes items 16, 17, 18 & 20)

25352.0002 1 Trunk W/Decals SST (Includes items 16, 17, 18 & 20)(CWTF-MV Models)

25352.0007 1 Trunk W/Decals SST (Includes items 16, 17 & 18) (Models W/O Warmers)

2 25144.0005 1 Panel W/Decals, Trunk - BLK Vinyl (Includes items 3 & 4)

23319.1004 1 Panel W/Decals, Trunk - BLK Painted (Includes items 3 & 4)

25144.0004 1 Panel W/Decals, Trunk - SST (Includes items 3 & 4)

25144.0003 1 Panel W/Decals, Trunk - BLK Vinyl (Includes item 3)(“A” &”B” Models)

23319.1003 1 Panel W/Decals, Trunk - BLK Painted (Includes item 3)(“A” &”B” Models)

25144.0002 1 Panel W/Decals, Trunk - SST (Includes item 3)(“A” & “B” Models)

25144.0010 1 Panel W/Decals, Trunk - SST (Includes items 3, 4 & 21)(CWTF-MV Models)

25144.0019 1 Panel W/Decals, Trunk - SST (Includes items 3 & 4) (Models W/O Warmers)

01382.0000 4 Screw, Truss Head SST #6-32 x .375”

01382.0002 4 Screw, Truss Head BLK #6-32 x .375”

00988.0000 4 Fastener, U-Type #6-32

3 00658.0000 1 Decal, Caution - Decanter/Funnel

4 10836.0000 1 Schematic, Electrical 120V & 120V/240V

10836.0005 1 Schematic, Electrical 120V/240V (CWTF-MV Models)

10836.0006 1 Schematic, Electrical 120V/240V (Models W/O Warmers)

5 25351.0000 1 Housing W/Decals, Base SST (Includes items 6 & 7)

25351.0002 1 Housing W/Decals, Base BLK (Includes items 6 & 7)

25351.0001 1 Housing W/Decals, Base (“A” Models)(Includes items 6 & 7)

23321.0000 1 Housing W/Decals, Base SST (Includes item 7) (Models W/O Warmers)

02308.0000 9 Screw, Pan Head #8-32 x .38”

6 12364.0000 1 Decal, Caution - Warmers And Surfaces Are Hot

7 22306.0000 1 Decal, Decorative Stripe

8 24805.0000 1 Cover, Base

02332.0002 4 Screw, Hex-Crimptite #6 x .38”

9 25137.0000 4 Foot, Rubber

10 00511.0000 4 Leg, 4” Adjustable Satin Nickel

11 03996.0000 4 Pad, Anti-Skid, Rubber (1.25” Dia.)

12 03359.0001 4 Leg, 4” Adjustable BLK (Order item 23)

13 03993.0000 4 Pad, Anti-Skid, Rubber (.70” Dia.) (Order item 23)

14 01592.0000 1 Bushing, Snap 1” Dia. (“A” Models only)

15 01593.0000 1 Bushing, Snap 1.5” Dia.

16 00831.0000 1 Decal, Warning - Electrical

17 00656.0000 1 Decal, Comply To Plumbing Code

Optional Equipment

18 26225.0000 1 Decal, Flow Control/Strainer( Brewers W/External Flow Control and Faucet)

19 13018.0200 1 Angle, Reinforcement

01345.0000 2 Screw, Flat Head #6-32 x .50”

00973.0000 2 Nut, Keps #6-32

20 00670.0000 1 Plug, Hole - .437” Hole Dia (Brewers W/Out Faucet)

21 28181.0000 1 Decal - Optional Field Wiring

22 32540.0000 1 Decal, Batch Set (Digital Timer) (Late models)

23 13255.0005 - Leg Kit (Includes items 12 & 13)

Early Model Brewers with Black

Decor and Screw on Angle

10789 120202

BUNN

TRUNKS AND PANELS - BRASS MODELS W/ONE WARMER BASE

DISCARD DECANTER IF:  

1985 BUNN-O-MATIC CORPORATION

 . CRACKED . SCRATCHED . BOILED DRY  . HEATED WHEN EMPTY . USED ON HIGH FLAME . OR EXPOSED ELECTRIC ELEMENTS

FUNNEL CONTENTS ARE HOT

PN: 658

CWT

CWTF

WARMERS AND SURFACES ARE HOT

CAUTION :

P1431

10789 020700

TRUNKS AND PANELS - BRASS MODELS W/ONE WARMER BASE

ITEM PART NO. QTY. DESCRIPTION

1 22557.0000 1 Trunk W/Decals (Includes Items 14, 15, 16, 18)

2 22559.0000 1 Panel W/Decals, Trunk (Includes items 3 & 4)

01315.0003 4 Screw, Truss Head #6-32 x .375”

00912.0000 4 Fastener, J-Type #6-32

3 00658.0000 1 Decal, Caution - Decanter/Funnel

4 10836.0000 1 Schematic, Electrical 120V & 120V/240V

5 22555.0000 1 Housing W/Decals, Base (Includes items 6 & 7)

02308.0000 7 Screw, Pan Head - Serrated #8-32 x .38”

6 12364.0000 1 Decal, Caution - Warmers And Surfaces Are Hot

7 22306.0000 1 Decal, Decorative Stripe

8 12673.0001 1 Cover, Base

01347.0000 11 Screw, Truss Head-Serrated #6-32 x .375”

00988.0000 11 Fastener, J-Type #6-32

9 22520.0000 1 Channel, Base Support - Left

22520.0001 1 Channel, Base Support - Right

10 22519.0000 1 Plate, Base Support

02308.0000 4 Screw, Pan Head - Serrated #8-32 x .375”

00970.0000 2 Nut, Keps #6-32

11 03011.0000 1 Plug, Vent 1” Dia

12 11435.0000 4 Foot, Rubber

02308.0000 4 Screw, Pan Head - Serrated #8-32 x .375”

13 01593.0000 1 Bushing, Snap 1.5” Dia.

14 00831.0000 1 Decal, Warning - Electrical

15 00656.0000 1 Decal, Comply To Plumbing Code

16 10447.0000 1 Decal, Flow Control/Strainer

17 22507.0000 1 Angle, Reinforcement

18 00670.0000 1 Plug, Hole - .437” Hole Dia (Brewers W/Out Faucet)

10789 020700

BUNN

TRUNKS AND PANELS - BREWERS W/TWO WARMER BASE

CWT

CWTF

1 19

Brewers With Black Decore

1 22

CWTF-MV Models

WARMERS AND SURFACES ARE HOT

CAUTION :

WARMERS AND SURFACES ARE HOT

CAUTION :

Optional Legs

P651

10789 051900

TRUNKS AND PANELS - BREWERS W/TWO WARMER BASE

ITEM PART NO. QTY. DESCRIPTION

1 25352.0000 1 Trunk W/Decals BLK Vinyl (Includes Items 16, 17, 18 & 20)

23320.1002 1 Trunk W/Decals BLK Painted (Includes Items 16, 17, 18 & 20)

25352.0008 1 Trunk W/Decals BLK Coated - No Receptacle (Includes Items 16, 17 & 18)

25352.0001 1 Trunk W/Decals SST (Includes items 16, 17, 18 & 20)

25352.0002 1 Trunk W/Decals SST (Includes items 16, 17 & 18) (CWTF-MV Models)

2 25144.0005 1 Panel W/Decals, Trunk - BLK Vinyl (Includes items 3 & 4)

23319.1004 1 Panel W/Decals, Trunk - BLK Painted (Includes items 3 & 4)

25144.0023 1 Panel W/Decals, Trunk - BLK Coated (Includes items 3, 4 & 23)

25144.0004 1 Panel W/Decals, Trunk - SST (Includes items 3 & 4)

25144.0010 1 Panel W/Decals, Trunk - SST (Includes items 3, 4 & 22)(CWTF-MV Models)

25144.0003 1 Panel W/Decals, Trunk - BLK Vinyl (Includes item 3)(“A” & “B” Models)

23319.1003 1 Panel W/Decals, Trunk - BLK Painted (Includes item 3)(“A” & “B” Models)

25144.0002 1 Panel W/Decals, Trunk - SST (Includes item 3)(“A” & “B” Models)

01382.0000 4 Screw, Truss Head SST #6-32 x .375”

01382.0002 4 Screw, Truss Head BLK #6-32 x .375”

00988.0000 4 Fastener, U-Type #6-32

3 00658.0000 1 Decal, Caution - Decanter/Funnel

4 10836.0000 1 Schematic, Electrical 120V & 120V/240V

10836.0005 1 Schematic, Electrical 120V/240V (CWTF-MV Models)

5 25657.0000 1 Housing W/Decals, Base SST (Includes items 6 & 7)

25657.0002 1 Housing W/Decals, Base BLK (Includes items 6 & 7)

25657.0001 1 Housing W/Decals, Base (“A” Models)(Includes items 6 & 7)

02308.0000 16 Screw, Pan Head #8-32 x .38”

6 12364.0000 2 Decal, Caution - Warmers And Surfaces Are Hot

7 22306.0000 2 Decal, Decorative Stripe

8 12667.0001 1 Cover, Base

02332.0002 12 Screw, Hex-Crimptite #6 x .38” (Eight less used on late Models)

9 25137.0000 4 Foot, Rubber

10 00511.0000 4 Leg, 4” Adjustable Satin Nickel

11 03996.0000 4 Pad, Anti-Skid, Rubber (1.25” Dia.)

12 03359.0001 4 Leg, 4” Adjustable BLK

13 03993.0000 4 Pad, Anti-Skid, Rubber (.70” Dia.)

14 01592.0000 2 Bushing, Snap 1” Dia.

15 01593.0000 2 Bushing, Snap 1.5” Dia.

16 00831.0000 1 Decal, Warning - Electrical

17 00656.0000 1 Decal, Comply To Plumbing Code

18 26225.0000 1 Decal, Flow Control/Strainer( Brewers W/External Flow Control and Faucet)

19 13018.0200 1 Angle, Reinforcement

01345.0000 2 Screw, Flat Head #6-32 x .50”

00973.0000 2 Nut, Keps #6-32

20 00670.0000 1 Plug, Hole - .437” I.D. (Brewers W/Out Faucet)

Brewers with Black Decor

21 25658.0000 1 Housing W/Decal, Side Warmer (Includes Item 6)

25658.0002 1 Housing, BLK W/Decal, Side Warmer (Includes Item 6)

22 28181.0000 1 Decal, Optional Field Wiring (Brewers withthree lower

warmers) (CWTF-MV models)

23 32540.0000 1 Decal, Batch Set (Digital Timer) (Late models)

10789 071602

BUNN

HOOD AND TOP COVERS - SST AND BLACK DECOR MODELS

1 2 3 2 6 4 3

WARMERS AND SURFACES ARE HOT

! CAUTION

6 8

CWT

CWTF

576

WARMERS AND SURFACES ARE HOT

! CAUTION

WARMERS AND SURFACES ARE HOT

! CAUTION

P652.50

10789 020700

HOOD AND TOP COVERS - SST AND BLACK DECOR MODELS

ITEM PART NO. QTY. DESCRIPTION

1 02999.0000 1 Plug, Hole 1.19" Dia. (Early Models)

2 25310.0001 1 Cover, Top

25325.0001 1 Cover W/Decal, Top (Brewers W/Three Lower Warmers)(Includes item 3)

28258.0000 1 Cover W/Decal, Top (Brewers W/Three Lower Warmers)(Includes item 8)(CWTFMV Models)

25633.0001 1 Cover w/Decal, Top (Brewers w/One Top Warmer/Rear) (Includes items 4 & 6)

25633.0002 1 Cover w/Decal, Top (Brewers w/One Top Warmer/Front) (Includes items 4 & 6)

25353.0001 1 Cover w/Decal, Top SST (Brewers w/Two Top Warmers) (Includes items 4 & 6)

25353.0004 1 Cover w/Decal, Top BLK (Brewers w/Two Top Warmers) (Includes items 4 & 6)

25353.0002 1 Cover w/Decal, Top (Brewers w/Two Top Warmers) (Includes items 4,6 & 8)(CWTFMV Models)

01303.0000 1 Screw, Pan Head #4-40 x .50"

00916.0000 1 Fastener, J-Type #4-40

3 02722.0000 1 Lid, Pour-In - SST

02722.0001 1 Lid, Pour-In - BLK

01319.0000 1 Screw, Thumb #8-32 x .75"

00912.0000 1 Fastener, J-Type #8-32

4 02765.0000 1 Decal, Caution - Warmers and Surfaces Are Hot

5 13350.0006 1 Housing, Hood SST (For Brewers with 7.125" Dia Funnel)

13350.0016 1 Housing, Hood BLK (For Brewers with 7.125" Dia Funnel)

13350.0011 1 Housing, Hood (For Brewers with 7.625" Dia Funnel)

02308.0000 6 Screw, Pan Head #8-32 x .38"

6 01592.0001 1 Bushing, Snap 1.188" Dia

01592.0000 1 Bushing, Snap 1.0" Dia.

7 02732.0000 1 Panel, Rear Top Warmer

01315.0000 2 Screw, Truss Head 8 - 32 x .375"

8 28180.0000 1 Decal, Wiring Conversion (CWTF-MV Models)

10789 112901

BUNN

HOOD AND TOP COVERS - BRASS MODELS

CWT

CWTF

! CAUTION



WARMERS AND SURFACES ARE HOT

P1430.45

10789 020700

HOOD AND TOP COVERS - BRASS MODELS

ITEM PART NO. QTY. DESCRIPTION

1 22510.1000 1 Cover Assembly, Top (Includes items 2 thru 5, ten #8-32 Keps Nuts and one #8-32

J-Type Fastener)

2 22556.0000 1 Housing W/Decal, Warmer (Includes item 3)

00970.0000 10 Nut, Keps #8-32

3 02765.0000 1 Decal, Caution - Warmers and Surfaces Are Hot

4 01592.0000 1 Bushing, Snap 1.0” Dia

5 22510.1001 1 Cover Assembly, Top (Includes item 4, ten #8-32 Keps Nuts and one #8-32 J-Type

Fastener)

01303.0001 1 Screw, Pan Head #4-40 x .50"

00916.0000 1 Fastener, J-Type #4-40

6 02722.0000 1 Lid, Pour-In

02322.0003 1 Screw, Truss Head - BLK #8-32 x 1,5”

00912.0000 1 Fastener, J-Type #8-32

7 22521.0000 2 Bracket, Tank Mounting

02308.0000 8 Screw, Pan Head - Serrated #8-32 x .375”

8 22522.0000 1 Panel

02308.0000 2 Screw, Pan Head - Serrated #8-32 x .375”

9 22523.0000 1 Housing, Hood

02308.0000 6 Screw, Pan Head - Serrated #8-32 x .375"

10 12655.0001 1 Rail, Funnel - Left

12656.0001 1 Rail, Funnel - Right

00970.0000 4 Nut, Keps #8-32

10789 020700

+ 28 hidden pages