Bunn Coffee Maker CRT5 Parts Diagram

CRT5

CRTF5

ILLUSTRATED PARTS CATALOG

Designs, materials, weights, specifications, and dimensions for equipment or replacement parts

are subject to change without notice.

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

www.bunnomatic.com

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as specified below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN

are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

10857 070102

TABLE OF CONTENTS

Electrical and Operating Controls............................................................................................................. 28

Faucet and Tubing .................................................................................................................................. 26

Funnels and Filter Basket ......................................................................................................................... 34

Fill Basin .................................................................................................................................................... 8

Hood, Trunk and Panels ............................................................................................................................ 4

Numerical Index....................................................................................................................................... 36

External Strainer, Flow Control, Solenoid and Lines ................................................................................ 20

Internal Strainer, Flow Control, Solenoid and Lines ................................................................................. 24

Tank and Components - CRT5,CRTA5,CRTB5 (First Type) ...................................................................... 10

Tank and Components - CRT5,CRTA5,CRTB5 (Second Type) ................................................................. 12

Tank and Components - CRTF5,CRTFA5,CRTFB5 (First Type)................................................................. 14

Tank and Components - CRTF5,CRTFA5,CRTFB5 (Second Type) ............................................................ 18

Warmer Assemblies................................................................................................................................. 32

10857 022500

BUNN

31 2 1

HOOD, TRUNK AND PANELS

EARLY MODELS

CRT5

CRTF5

2 3

9 10

20 22 24

19 18

21 23 25

OPTIONAL LEGS

17A

EARLY MODELS

P661.37

10857 061500

HOOD, TRUNK AND PANELS

ITEM PART NO. QTY. DESCRIPTION

1 02722.0000 1 Lid, Pour-In

01319.0000 1 Screw, Thumb, #8-32 x .75”

00912.0000 1 Fastener, J-Type #8-32

2 12953.1001 1 Cover Assembly, Top (Includes item 3) (Early Models)

25310.0001 1 Cover Assembly, Top (Late Models)

01303.0000 1 Screw, Pan Head #4-40 x .50”

00916.0000 1 Fastener, J-Type #4-40

3 00833.0000 1 Decal, Pour-In Water Only

4 13350.0006 1 Housing, Hood

13350.0014 1 Housing, Hood (Brewers W/Side Start Switch)

02308.0000 6 Screw, Pan Head Serrated #8-32 x .375”

5 03263.0002 1 Spacer, Sponge W/Adhesive (Early Models)

6 25658.0000 2 Housing W/Decal, Side Warmer (Includes item 7)

02308.0000 14 Screw, Pan Head Serrated #8-32 x .375”

7 12364.0000 2 Decal, Caution - Warmers And Surfaces Are Hot

8 25352.0001 1 Trunk W/Decals (includes items 27 Thru 30)

02308.0000 9 Screw, Pan Head Serrated #8-32 x .375”

9 25144.0006 1 Panel W/Decals (Includes items 10, 11)(also order Item 32 for late models)

25144.0002 1 Panel W/Decal (Includes item 10) (“A” & “B” Models)

01382.0000 4 Screw, Truss Head #6-32 x .375”

00988.0000 4 Fastener, U-Type #6-32

10 00658.0000 1 Decal, Caution - Decanter/Funnel

11 10476.0000 1 Schematic, Electrical 120V & 120V/240V

12 01593.0000 3 Bushing, Snap 1.5” Dia

13 01592.0000 3 Bushing, Snap 1” Dia

14 25755.0000 1 Housing W/Decals, Base (Includes items 15, 16, 17A & 19)

25755.0002 1 Housing W/Decals, Base (Includes items 15 & 16) (If for Early Models also order .250” Legs)

15 22306.0000 3 Decal, Red Decorative Stripe

16 12364.0000 1 Decal, Caution - Warmers And Surfaces Are Hot

17 11435.0000 4 Foot, Rubber - .625” Dia x .25 Ht

02308.0000 4 Screw, Pan Head Serrated #8-32 x .375”

17A 25137.0000 4 Foot, .25”-20 (Late Models)

18 00671.0000 4 Plug, Hole - Nyl .312” Dia. (Not used on brewers with 4” adjustable

legs.) (Early Models)

Early Models

19 12832.0001 1 Plate Assembly, Base (Early Models)

26583.0000 1 Plate Assembly, Base (Late Models)

02332.0002 14 Screw, Hex-Crimptite #6 x .375”

(Continued)

10857 061500

BUNN

31 2 1

HOOD, TRUNK AND PANELS

(Continued)

EARLY MODELS

CRT5

CRTF5

2 3

9 10

20 22 24

19 18

21 23 25

OPTIONAL LEGS

17A

EARLY MODELS

P661.37

10857 061500

HOOD, TRUNK AND PANELS

ITEM PART NO. QTY. DESCRIPTION

20 12070.0001 4 Leg, Plastic - 4.0” Lg

01321.0000 4 Screw, Truss Head #8-32 x 1”

21 12071.0001 4 Plug, Leg-Rubber

22 03359.0000 4 Leg, Adjustable Plastic - 4.0” Lg (.375”-16) (Early Models)

03359.0001 4 Leg, Adjustable Plastic - 4.0” Lg (.250”-20) (Late Models)

23 03993.0000 4 Pad, Rubber .70” Dia

24 00502.0000 4 Leg, Adjustable Nickel 4.0” Lg (Early Models)

00511.0000 4 Leg, Adjustable Nickel 4.0” Lg (Late Models)

25 03996.0000 4 Pad, Rubber 1.25” Dia.

26 03011.0000 3 Plug, Vent 1.0” Dia. (Early Models)

27 00670.0000 1 Plug, Hole .437” Dia (Brewers W/Out Faucet)

28 00656.0000 1 Decal, Comply To Plumbing Code

29 26225.0000 1 Decal, Flow Control/Strainer (Brewers W/External Flow Control and Faucet)

30 00831.0000 1 Decal, Warning - Electrical

31 02999.0000 1 Plug, Hole - 1.19” Dia (Late Models)

Optional

32 32540.0000 1 Decal, Batch Set (Digital Timer) (Late Models)

33 13255.0005 - Leg Kit, Adjustable Plastic - 4.0” Lg (Includes items 22 & 23)(Late Models)

10857 091302

BUNN

FILL BASIN

CRT5

CRTF5

04270.0002

01592.0000 (2)

02337.0001

P662

10857 072103

FILL BASIN

ITEM PART NO. QTY. DESCRIPTION

1 27514.0000 1 Plate, Splash Guard

2 01212.0000 1 Fitting, Tank Inlet (Early Models)

3 04270.0002 1 Fill Basin

4 01201.0000 1 Gasket, Tank Inlet

5 12914.0002 1 Tube Assembly, Solenoid To Fill Basin (Includes item 6)

6 12928.0000 1 Grommet, Basin

7 ------------- - Solenoid Assembly (SeeStrainer/Flow Control and Lines)

8 32063.0000 1 Fitting

9 ------------- 1 Hose, Silicone .313” I.D. x 4.0” (Order item 10)

10 28526.1000 - Hose, Silicone .313” I.D. x 12.0” (Cut to required length)

10857 072103

BUNN

TANK AND COMPONENTS CRT5, CRTA5, CRTB5 (FIRST TYPE)

4 10 11 14

REPLACEMENT PART

CRT5

CRTF5

P663

10857 022500

TANK AND COMPONENTS CRT5, CRTA5, CRTB5 (FIRST TYPE)

ITEM PART NO. QTY. DESCRIPTION

- -------------- 1 Tank Assy, 1800W 120V

-------------- 1 Tank Assy, 3500W 120/240V

-------------- 1 Tank Assy, 3500W 240V

-------------- 1 Tank Assy, 1850W 220V

-------------- 1 Tank Assy, 1600W 100V

-------------- 1 Tank Assy, 3500W 200V

01315.0000 2 Screw, Pan Head #8-32 x .375”

00912.0000 2 Fastener, J-Type #8-32

Includes items 1 thru 18. Not Available. Order Second Type Tank Assy

Includes items 2 & 4 thru 18. Not Available. Order Components

1 04119.0000 1 Tank W/Blanket Warmer, 120V

04133.0000 1 Tank W/Blanket Warmer, 220V

2 04118.0000 1 Tank

3 04260.0000 1 Blanket Warmer, 50W 120V

01927.0000 1 Blanket Warmer, 50W 220V

4 04221.0000 1 Gasket, Tank Lid

5- - - - - - - - 1 Tank Lid Weldment (Not Available. Order Second Type Tank Lid)(Page 13)

00908.0000 8 Nut, Hex #8-32

6 00942.0000 2 Nut, Hex .50"-20

7 29329.1000 1 Thermostat, Limit

8 00943.0000 2 Gasket, Tank Heater

9 20939.1000 1 Tank Heater, 1600W 100V

04636.1000 1 Tank Heater, 1800W 120V

01925.1000 1 Tank Heater, 1850W 220V

04637.1000 1 Tank Heater, 3500W 240V

20941.1000 1 Tank Heater, 3500W 200V

10 23769.0000 1 Lead, Electrical Blk (Thermostat to Heater)

11 23768.0000 1 Lead, Electrical Blu (Thermostat to Limit)

12 12906.0000 1 Bracket, Thermostat Mounting

00970.0000 2 Nut, Keps #8-32

Includes items 2 & 3

Includes item 8

13 04227.1001 1 Thermostat Assy

02308.0000 2 Screw, Pan Head #8-32 x .375"

14 07073.0000 1 Grommet, Thermostat (Replacement Part)

15 11431.0002 1 Sprayhead Tube Kit (Includes 3 mounting nuts below & items 16 & 17)

00908.0000 3 Nut, Hex# 8-32

16 05515.0000 1 Gasket, Sprayhead Tube

17 05518.0000 1 Hub, Syphon

18 12949.0001 1 Wiring Harness, Heater/Limit (15 AMP Models)

12949.0002 1 Wiring Harness, Heater/Limit (20 AMP Models)

12949.0003 1 Wiring Harness, Heater/Limit (35 AMP Models)

19 01075.0000 1 Nut, Hex .438" - 20

20 01082.0000 1 Sprayhead, 6-Hole

01082.0004 1 Sprayhead, 5-Hole (“A” Models - Optional)

01082.0007 1 Sprayhead, 1-Hole (Brewers with Pouch Pack Funnel)

Not Illustrated

10857 061500

BUNN

TANK AND COMPONENTS CRT5, CRTA5, CRTB5 (SECOND TYPE)

10 11

CRT5

CRTF5

P654

10857 022500

+ 25 hidden pages