Powder Autofill Gourmet Ice® System
Features
Gourmet Ice® System
•
Three large hoppers hold 2 gallons
of frozen drinks each.
•
Dry product hoppers (5 lb. capacity
each) are easy to remove & fill.
• Product and water mix control,
adjustable with motor speed
from 15 to 90 RPM.
• Lighted display increases sales
with product merchandising.
• Refills at a rate of approximately
1.1 fluid ounces per second.
• Flashing light alerts that
powder is low.
with 3 hoppers
ITEM#
PROJECT
DATE
• 3-year warranty on compressor.
• Available in white or black decor.
• Sanitation listed by ETL to NSF
Standard 18 (includes dairy &
alcohol) and safety listed by ETL
to UL Standard (UL 471) and CSA
Standard (C22.2 No. 120).
Related Products
For available variations to some BUNN
please contact your BUNN sales representative.
Clear plastic hoppers
products,
pull out easily to
refill powdered
product.
Model CDS-3 PAF
Entire autofill unit slides
back so that product
hoppers can be
lifted out for
cleaning.
Model
CDS-3 PAF
Corporate Offices
1400 Stevenson Drive
Springfield, Illinois 62703
Phone
800-637-8606
217-529-6601
Fax
217-529-6644
Technical Services
800-286-6070
Internet
http://www.bunnomatic.com
Western Regional Office
16431 Carmenita Road,
Cerritos, California 90701
Phone
562-926-0764
Fax
562-926-0858
Canadian Office
280 Industrial Parkway South
Aurora, Ontario, L4G 3T9
Phone
905-841-2866
Fax
905-841-2775
Patents
Apply
Specialty Drinks/Gourmet Ice with Powder Autofill/CDS-3 PAF
1/2000
D4
The Mark of Quality in Beverage Equipment Worldwide
Dimensions & Specifications
Model Product # Volts Amps Capacity Cu Shipping Cord
Ft. Weight Attached
CDS-3 PAF
CDS-3 PAF
Note: Includes the following:
(1) CDS-3 PAF Base (29286.0003) 120 20 n/a 14.5 179 lbs. (81.4 kg) Yes
(1) 3-PAF Hopper Group (29285.0006) n/a n/a 3 @ 2 gallons 9.3 35 lbs. (15.9 kg) n/a
(3) PAF Units (29500.0000) 120 1.0 1 @ 5 lbs. dry 2.7 20 lbs. (9.1 kg) Yes
* Model is a non-stock item.
Electrical: Model requires 2-wires plus ground service rated 120V, single phase, 60 Hz.
Plumbing: 20-90 psi (138-621 kPa). Machine supplied with 1⁄4" male flare fitting.
(White)* 29300.0008 120 20 5 lbs. dry product 31.9 274 lbs. (124.6 kg) See Note Yes
(Black)* 29300.0009 120 20 5 lbs. dry product 31.9 274 lbs. (124.6 kg) See Note Yes
8.1
WATER INLET
8.1
WATER INLET
5.6
WATER INLET
24.4
8.0
.250
1.695
5.735
.105
.105
7.080
6.580
24.1
R.200 4 PLCS
R.125 8 PLCS
.625 4 PLCS
COLOR
OVERLAY
1. MATERIAL: .030 POLYCARBONATE
WITH HARD COAT - GE HP92
CLEAR LEXAN. PROTECTIVE
FILM OVER HARD COAT.
2. SECOND SURFACE PRINTED.
28.5
WATER
INLET
OPTIONAL
REAR
COVER
27.3
4.0
1.2 REF
6.55
REF
POWER CORD
3.12
CLEARANCE
FROM WALL
All dimensions shown in inches.
19.7
14.0
17.5
4.0 REF
10.0
6.94
DRAIN FDR DRIP TRAY
MAY BE DRILLED OUT
1.4
TO APPROX. Ø.22
ACCOMMODATES
FLEXIBLE HOSE
Ø.375 INSIDE
16.1
5.7
7.5
23.3 REF
43.7
2.32
19.25
23.9
41.1
LEGS ADJUSTABLE
4.0 TO 5.75 LONG
41.8