Bunn Brewise 39132 User Manual

SERVICE SUPPLEMENT

TO 39132.0000

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: [phone] FAX: [phone]

39132.0003A 04/12 ©2010 Bunn-O-Matic Corporation

Page 2

39132.3 030912

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers
and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor.

2) All other equipment - 2 years parts and 1 year labor plus added warranties as specifi ed below:
a) Electronic circuit and/or control boards - parts and labor for 3 years.
b) Compressors on refrigeration equipment - 5 years parts and 1 year labor.
c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts

and labor for 4 years or 40,000 pounds of coffee, whichever comes fi rst.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be
commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the
applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured
by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation,
improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality,
damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but
not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN
prompt notice of any claim to be made under this warranty by telephone at [phone] or by writing to Post Offi ce
Box 3227, Springfi eld, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an
authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under
warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX­PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make

modifi cations to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such
individuals, whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive op­tion while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the
applicable parts and labor warranty periods specifi ed above) to repair the defective components, provided that this repair
is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for
the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS
EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION
AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profi ts, lost sales, loss of
use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities
or services, or any other special, incidental or consequential damages.

392, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN
Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic,
Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design,
Dual, Easy Pour, EasyClear, EasyGard, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, In­tellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with
the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel,
Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh,
Titan, trifecta, Velocity Brew, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Profi t
Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer
Control, Nothing Brews Like a BUNN, Pouring Profi ts, Signature Series, Tea At Its Best, The Horizontal Red Line, Ultra are
either trademarks or registered trademarks of Bunn-O-Matic Corporation.

Page 3

39132.3 040312

INTRODUCTION

This equipment will brew a half-gallon batch of coffee into an awaiting dispenser. It can be easily
confi gured for 120V 15 amp, 120/208V 20 amp or 120/240V 20 amp. The brewer may have a hot water
faucet for allied beverage use. It is only for indoor use on a sturdy counter or shelf.

CONTENTS

Warranty............................................................................................... 2

Contents .............................................................................................. 3

Programming ....................................................................................... 4

Schematic Wiring Diagram ............................................................... 10

Page 4

PROGRAMMING

PROGRAMMING THE BREWER

The information in this manual covers only the differences between this model and the standard Axiom.
Access to service level 4 is same as standard Axiom.
The following function screens are in order of appearance. Each screen will have instructions on how to access,
and the procedures to program the various functions of the brewer.

IMPORTANT PROGRAMMING NOTES

- READ CAREFULLY -

To exit the programming mode at any time, press and release "ENABLE BREW ON/OFF" switch located on the
front switch panel. The display will return to the MAIN SCREEN.
If none of the programming switches are pressed within one minute during the setup of the brewer, the
programming of the function screen that is being set will be exited and the display will return to the MAIN
SCREEN.
Always remember to place an empty server and funnel under the sprayhead when operating the brewer dur­ing the set-up of PULSE BREW, CALIBRATE FLOW and testing the brew valve in TEST OUTPUTS.

Push and hold left "hidden"
button to access service
program modes.

READY TO BREW

WATER TEMP: 200°

LOCK

SET

PROGRAMMING LOCKOUT SWITCH

(Mounted on main control board)

This switch can be set to prevent access to the programming settings of the brewer. Once all the cor­rect brew settings are programmed, the operator can set the switch to the "LOCK" position to prohibit
anyone from changing the settings. With the switch in the "LOCK" position, the programming menus
can still be accessed to view the current settings. However, no changes will be saved.

Disconnect brewer
from power source
before removing any
panel!

REVERSE FORWARDREVERSE FORWARD

39132.3 040312

Page 5

SERVICE PROGRAMMING

GLASS FRESH HRS

TEST RFID BOARD

SET DATE/TIME ?

NO YES

ADJUST ALARM

NO VOLUME ? YES

EXPIRATION SECS

(-) 10 (+)

EXPIRATION ALARM

DISABLE ENABLE

FRESHNESS SCAN

NO DONE YES

WARMER MINs PAST

FRESHNESS: 5

ThermalFresh HRS

(-) 2.0 (+)

FRESHNESS TIMEOUT

DISPLAY BREW TIMES

NO YES

Freq&AdjustCaps?

PRE-EXPIRE ALARM

DISABLE ENABLE

NO YES NO YES

(-) .5 (+) NO YES

AXIOM

VERSION xx.xx

Return To Main Screen

Displays Model &

Software Version

39132.3 040312

Page 6

SERVICE PROGRAMMING

MAY 10 2010

MAIN 10:00:00 AM

This allows you to monitor the frequency of the warmer(s) sensing
coils.

Also allows you to monitor the adjustment capacitors, which are used
to keep the coil frequency at it's nominal value (125.0 khz)

Use the "Brewer" button to toggle between screens.

Press right hidden button to advance to next function.

125.0 0000 * TOP F

125.0 0000 * TOP R

This allows you to read the "age" of any brewed batch in a particular
carafe (as long as it is equipped with an RFID chip). The sensor coil
will read the chip and brewer will display time of day it was brewed.

DISPLAY BREW TIMES

NO YES

Freq&AdjustCaps?

NO YES

125.0 0000 * MAIN

TEST RFID BOARD

NO YES

This screen will automatically scroll through all warmers.

Press right hidden button to advance to next function.

This allows you to monitor individual sensing coils and RFID board.

RFID CIRCUIT BOARD

VERSION # xx.xx

CONTINUED

39132.3 040312

Page 7

SERVICE PROGRAMMING

If a carafe is placed on a particular warmer, a "box" will appear next
to it's indicator. If the box is fi lled (solid) it's not expired yet. If the
box is empty, the time is expired. See example: MAIN = expired; Top
Front = not expired; Top Rear = expired.
Press right hidden button to advance to next function.

10:00:00 AM

M

PRESS ANY SWITCH

TO EXIT

TF TR

WARMER MINs PAST

FRESHNESS: 5

Enables the "FRESHNESS ALERT!" message and sets the
expiration time. The expiration time is the amount of time the
product is allowed to sit in the glass decanter before an alert
message is displayed. DEFAULT: .5
Range: OFF/0.5 - 4.0 hrs

Sets the amount of time the warmers will turn off after an alert
message is displayed. DEFAULT: 5
Range: OFF/1 - 30 min

Enables the "FRESHNESS ALERT!" message and sets the
expiration time. The expiration time is the amount of time the
product is allowed to sit in the thermal server before an alert
message is displayed. DEFAULT: 2.0
Range: OFF/0.5 - 4.0 hrs

ThermalFresh HRS

(-) 2.0 (+)

GLASS FRESH HRS

(-) .5 (+)

FRESHNESS SCAN

NO DONE YES

Allows brewer to continually scan the warmer sensor coils and
display freshness times.

EXPIRATION ALARM

DISABLE ENABLE

Enable/Disable beeper.

CONTINUED

39132.3 040312

Page 8

ADJUST ALARM 5

ADJUST ALARM

NO VOLUME ? YES

Select "YES" to adjust beeper volume.

Press "+" to increase volume, or "-" to decrease.

- +

Sets the amount of delay between alarm beeps.

EXPIRATION SECS

(-) 10 (+)

SET DATE/TIME ?

NO YES

Select "YES" to set date and/or time.

YEAR 2010

(-) DONE (+)

Press "+" to scroll year forward, or "-" to scroll year back.

MONTH MAY

(-) DONE (+)

Press "+" to scroll month forward, or "-" to scroll month back.

DAY 10

(-) DONE (+)

Press "+" to scroll day forward, or "-" to scroll day back.

CONTINUED

SERVICE PROGRAMMING

39132.3 040312

Page 9

MINUTE 00

(-) DONE (+)

Press "+" to scroll minute forward, or "-" to scroll minute
back.

Press "+" to scroll hour forward, or "-" to scroll hour back.

HOUR 10 AM

(-) DONE (+)

SECOND 00

(-) DONE (+)

Press "+" to scroll seconds forward, or "-" to scroll seconds
back.

PRE-EXPIRE ALARM

DISABLE ENABLE

Enable/disable the 5 minute warning beep for a carafe about
to expire.

EXIT

SERVICE PROGRAMMING

39132.3 040312

Page 10

MAIN ON/OFF SWITCH

(Late Models only)

GRN

Chassis Ground

Earth Ground

OPTIONAL FAUCET HEATER

WHI

WHI

P1, P2, &

P3 ARE

PINS OF A

POLARIZED

THREE-PIN

CONNECTOR.

SOL

SCHEMATIC WIRING DIAGRAM

AXIOM BrewWISE-DV

29077.0021A 06/10 ©2010 BUNN-O-MATIC CORPORATION

P2

P1

P1

FRONT WARMER

P3

BRN/BLK

VIO

WHI

REAR WARMER

BLU-14

BLU-14

BREW STATION WARMER

(CONTROLLED BY ENABLE BREW SW)

LIMIT

THERMOSTAT

BRN/BLK

P2

P3

WHI/RED

WHI/RED

REAR WARMER

FRONT WARMER

WHI

WHI

WHI

WHI

WHI

WHI

WHI

SOL

REFILL

DISPENSE

J1-1

RELAY

J1-5

J1-10

C
O
N
T
R
O
L

P
C
B

O
A
R
D

BLK

BLK-14

BRN/BLK

BLK-14

BLK-14

WHI/GRN

WHI/GRN

WHI/BLU

WHI/BLU

120V AC 2 WIRE
120/208V AC 3 WIRE
120/240V AC 3 WIRE

SINGLE PHASE

YEL

WHI/VIO

WHI/VIO

VIO

BLK

WHI

YEL

W

H

I

W
H

I

CONTROL SWITCH ASSY

J2-1

J2-5

J2-10

B1

STATIC
SHIELD

A6

D1

A3 D2 A4 D3 A5 B2 A2 A1

J3-1

J3-3

BRN

BLU

WHI

GRN

LEVEL PROBE
(LONG)

LEVEL PROBE
(SHORT)

t°

(NOTE – ALL WARMERS ARE NOT

AVAILABLE ON ALL MODELS!)

(LEFT WARMER)

(TOP WARMERS)

J9-1

BLK

CONTROL SWITCH ASSY CODES

2 WARMERS

ON LEFT

2 WARMERS

ON TOP

2 WARMERS

ON RIGHT
BREW STATION A3 A3 A3
LEFT FRONT A2
LEFT REAR A1
TOP FRONT A5
TOP REAR A6
RIGHT FRONT A5
RIGHT REAR A6
START BREW A4 A4 A4
LEFT HIDDEN B1 B1 B1
RIGHT HIDDEN B2 B2 B2
“DIGITAL” D1 D1 D1
“BREWER” D2 D2 D2
“CONTROL” D3 D3 D3

L1

L2

BLK

N

RED Model 35

WHI Model 15 & 35

WHI Model 20

J13-1

J13-5

RFID
BOARD

TOP REAR WARMER SENSOR

LOWER WARMER SENSOR

GRN
BLU

YEL

RED

BRN

ORN

J5-1

J6-1

J7-1

TOP FRONT WARMER SENSOR

J1-5

J1-1

RED

J12-1

BLK

BEEPER

BLK-14

WHI/VIO-14

WHI-14

BLU-14

RED-14

TANK HEATER

1425W

TANK HEATER

2268W

SELECTOR

SWITCH

39132.3 040312