Bunn B10 Series User Manual

980.77 Kb
Loading...

®

BRW

BUNN

BrewWISE ®

 

Recipe Writer

INSTALLATION AND OPERATING MANUAL

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

34446.0000C 07/04 ©2002 Bunn-O-Matic Corporation

www.bunnomatic.com

Introduction

The BrewWISE® Recipe Writer box connects to a PC by way of a standard serial port or USB port where applicable. PC software is included that provides a user interface to the Writer box. A unique feature of the BrewWISE® system is the ability to transfer information to and from the brewer, funnels, and grinder via the funnels or memory cards.

The BrewWISE® Recipe Writer provides a convenient method of transferring information. The system can then be used to configure the brewer, funnels, and grinder for optimum flavor performance.

The BrewWISE® Recipe Writer can be used to make:

Recipe cards for specific coffee names

Recipe cards for No-Name coffee

Funnels dedicated to one specific coffee name

Cards for advertising messages

Use the following diagram as a guide to selecting the type of funnel or recipe card to be written:

 

 

 

 

 

Will coffee be

 

 

 

 

 

 

 

 

 

 

 

 

ground in a

 

 

 

 

 

 

 

 

 

 

 

 

 

BrewWISE® grinder?

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

 

 

 

NO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select

 

 

 

Is funnel to be

 

 

 

 

"New Recipe"

 

 

 

used for one

 

 

 

 

Function

 

 

 

coffee only?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YES

 

 

 

 

 

 

NO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select

 

 

 

 

 

 

Brewer will

 

 

 

"Dedicated Funnel"

 

 

 

use No-Name

 

 

 

 

 

function

 

 

 

 

 

 

settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After Dedicated funnel is completed,

make new recipe card

to use for loading dedicated name into brewer

BrewWISE® brewer model?

 

 

 

SINGLE

DUAL

Select "No-Name

Left" function

Which side will be used for this coffee?

 

 

 

 

 

 

 

 

 

LEFT

 

BOTH

 

RIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select "No-Name

 

 

 

Select "No-Name

Left" function

 

 

 

Right" function

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Make both No-Name left and No-Name right cards with same recipe

2

34446 070804

 

System Requirements

PC with 486DX/66MHz or higher processor; Pentium or higher processor recommended.

Microsoft® Windows 95, 98, 2000, NT®, or XP operating systems.

VGA or higher resolution monitor; Super VGA recommended.

A functional, available RS-232 serial port set up as Com1-Com4 or a USB to Serial adapter Cable (Bunn-O-Matic part # 37076.0000) where applicable.

Installation

If a USB to Serial Adapter was included with your writer, follow the instruction supplied with it for installation.

It is recommended that all open Windows applications be closed before installing BrewWISE® Recipe Writer software.

If you are updating an existing version of the BrewWISE® Recipe Writer software, the older version MUST first be un-installed using Windows Control Panel. Simply go to Start-Settings-Control Panel and Double-click Add/Remove Programs. Then find the Recipe Writer software in the list of installed programs, select, and click the Change/Remove button.

From Windows Explorer, Double Click on the setup.exe file located on the installation CD or on Disk 1 of the installation disks. The installation program will display a “Copying Files” screen. This screen could be present for several minutes if installing from floppy disks; much less if installing from a CD. You will be prompted to insert Disk 2 if installing from floppy disks.

Double Click

setup.exe

3

34446 070804

 

After all the necessary files are copied, the installation program displays a Welcome screen that allows the user to continue with installation or exit the setup program. If any Windows applications are running, it is recommended that you close them at this time.

4

34446 071002

 

This label indicates the default installation path of the BrewWISE® software.

Click this button to change the default installation path.

Click this button to exit the setup program.

Click this button to continue with the software installation.

The setup program will then prompt the user to choose a program group. It is recommended that the default BrewWISE® group be chosen. Click “Continue” to accept this Program Group.

Once the “Continue” button is clicked, a progress bar will display as the installation completes. Shortly after, a message box indicating that BrewWISE® setup was completed successfully should appear. Clicking OK will complete the setup process.

5

34446 070804

 

+ 10 hidden pages