Buffalo Tools PRO-Series PS07215 Operating Instructions Manual

PS07215

18 Volt Cordless Drill

Operating Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur.
prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO
NOT OPERATE THIS PRODUCT!

HAVE QUESTIONS OR PROBLEMS? DO NOT RETURN THIS PRODUCT TO THE RETAILER ­CONTACT CUSTOMER SERVICE.

If you experience a problem or need parts for this product, visit our website
or call our customer help line at 1-888-287-6981
sales receipt is required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.

We reserve the right to change this product at any time without

http://www.buffalotools.com

, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the

GENERAL SAFETY RULES FOR ALL POWER TOOLS

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

What You Need to Know About Safety Instructions

Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions
and situations that may occur. Common sense, caution and care must be exercised when operating or cleaning
tools and equipment.

Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not
understand.

This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.

DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may

PS07215 18 Volt Cordless Drill Operating Instructions

result in property damage.
NOTE provides additional information that is useful for proper use

and maintenance for this tool. If a NOTE is indicated make sure it
is fully understood.

2

IMPORTANT SAFETY INSTRUCTIONS
WORK AREA

Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.
Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.

TOOL USE & CARE

Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or

against your body is unstable and may lead to loss of control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is

designed.
Do not use the tool if the power switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is

dangerous and must be repaired.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

People with pacemakers or other electronic devices should consult with a physician before operating this product. Interruption

or failure of the pacemaker could occur when electrical equipment is operated within close proximity of electrical devices.

Inhaling dust created as a result of construction projects could be hazardous to your health. Construction dust may contain
chemicals, which are known to cause cancer, birth defects and other reproductive harm in the State of California.

These chemicals could be, but are not limited to: lead from lead based paints, crystalline silica from bricks or cement, arsenic, and
chromium from chemically treated-lumber.

To reduce your risk of exposure to harmful materials: always wear a dust mask that is designed to filter out hazardous microscopic
contaminants, always work in a well ventilated area, and wear other approved safety equipment.

Wash hands after handling the tool. Touching the tool could expose you to lead, which is known in the State of California to cause
cancer, birth defects and other reproductive harm.

All work areas should be clean and well lit. Accidents are more likely to occur in poorly lit and cluttered areas.

Do not operate power tools in the presence of flammable liquids, gas, or dust. Sparks created from the power tool could ignite
flammable materials.

Keep children, and other distractions at a distance while operating power tools.

PS07215 18 Volt Cordless Drill Operating Instructions

3