Buffalo Tools LST30 Instruction Manual

LST30

30 TON LOG SPLITTER

INSTRUCTION MANUAL

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur. We reserve the right to change this product at any time without prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO NOT OPERATE THIS PRODUCT!

DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUST OMER SERVICE.

If you experience a problem, have questions or need parts for this product, call Customer Service at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required. Visit online http://www.sportsmanseriesbrand.com

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR REFERENCE.

WARNING:

Engine Displacement

196cc

Fuel Tank Capacity

0.95 Gallon (3.6 Liters)

Engine Oil Capacity

20.25 ounces (0.6 Liter) SAE 10W -30 oil

Spark Plug Gap

0.8mm

Max. Splitting Force

30 Ton

Max. Splitting Length

21 inches

Wedge Hei ght

5 inches

Hydraulic Oil Capacity

3.38 Quarts (3.2 Liter) AW All Weather ISO 32

Hitch

Pin Style

Tandem Hitch

Pin or ball style (ball hitch not included)

WARNING! Use extreme caution when unpacking this machine. Some components are very

Your Responsibility - Restrict the use of this power machine to persons who read,

understand and follow the warnings and instructions in this manual and on the machine.

SAVE THESE INSTRUCTIONS!

SPECIFICATIONS

Gas Type Unleaded Gasoline Max. Output 6.5 HP / 3,600 rpm

Weight Spark Plug Engine Type

205 lbs LD: F7RTC NGK: B PR6ES DENSO: W20EPR-U 4-Stroke CARB Approved

LOOSE PARTS

Unpacking

heavy and will require additional people or mechanical handling equipment.

Note: If any parts are damaged or missing, do not attempt to operate this machine until the damaged or missing parts are obtained and are installed correctly

Loose Parts

Check all loose parts from the box with the list below. Assemble according to the instructions.

LST30 30 Ton Log Splitter

IMPORTANT SAFE OPERATION PRACTICES

these instructions may result in inj ury. When you see this symbol. HEED ITS WARNING!

CALIFORNIA PROPOSTION 65

cause cancer and birth defects or other reproductive harm.

DANGER! This machine was built to be operated according to the safe operation practices in

can result in serious in

WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with

WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to

this manual. As with any type of power equipment, carelessness or error

machine is capable of amputating hands and feet and throwing debris. Failur e to observe the safety instructions could result in serious injury or death.

Training

1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2. Be familiar with all controls and their proper operation. Know how to stop the machine and disengage.

3. Never allow children under 16 years of age to operate this machine. Children 16 and over should read and understand the instructions and safe operation practices in this manual and on the machine and be trained and supervised by an adult.

4. Never allow adults to operate this machine without proper instruction. Do not use if under the influence of alcohol or drugs.

5. Many accidents occur when more than one person operates the machine. If a helper is assisting in stacking logs, never activate the control until the helper is a minimum of 10 feet from the machine.

6. Keep bystanders, pets, and children at least 20 feet from the machine while it is in operation.

7. Never allow any one to ride on this machine.

8. Never transport cargo on this machine.

9. Hydraulic fluids are made up of chemicals and additives. They can be extremely irritating to the skin. Protect exposed skin from the liquid. Immediately use soap and water to wash any areas that came into contact with the fluid.

a. Do not operate machine with frayed, kinked, cracked, or damaged hoses, fittings, or tubing. b. Stop the engine and relieve hydraulic system pressure before changing or adjusting fittings, hoses,

tubing, or other system components.

c. Do not adjust the pressure settings of the pump or valve.

LST30 30 Ton Log Splitter

IMPORTANT SAFE OPERATION PRACTICES

10. Leaks can be detected by passing cardboard or wood, while wearing protective gloves and safety glasses, over the suspected area. Look for discoloration of cardboard or wood.

11. If injured by escaping fluid, see a doctor immediately. Serious infection or reaction can develop if proper medical treatment is not administered immediately.

12. Keep the operator zone and adjacent area clear for safe, secure footing.

13. If your machine is equipped with an internal combustion engine and is intended for use near any unimproved forest, brush, or grass covered land, the engine exhaust should be equipped with a spark arrester. Make sure you comply with applicable local, state, and federal codes. Take appropriate firefighting equipment with you.

14. This machine should be used for splitting wood only, do not use it for any other purpose.

15. Following the instructions in the manual(s) provided with any attachment(s) for this machine.

Preparation

1. Always wear safety shoes or heavy boots.

2. Always wear safety glasses or safety goggles when operating this machine.

3. Never wear jewelry or loose clothing that might become entangled in moving or rotating parts of the machine.

4. Make sure machine is on a level surface before operating.

5. Always block wheels to prevent unintended movement, and lock beam in either the horizontal or vertical position.

6. Always operate this machine from the operator zone(s) specified in the manual.

7. Logs should be cut with square ends prior to splitting.

8. Use log splitter in daylight or under good artificial light.

Safe Handling of Gasoline

To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a. Use only an approved gasoline container. b. Extinguish all cigarettes, cigars, pipes, and other sources of ignition. c. Never fuel machine in doors. d. Never remove gas cap or add fuel while the engine is hot or running. e. Allow engine to cool at latest two minutes before refueling. f. Never overfill the fuel tank. Fill tank to no more than 1/2 inch below bottom of filler neck to provide

space for fuel expansion. g. Replace gasoline cap and tighten securely. h. If gasoline is spilled, wipe it off the engine and equipment and move machine to another area. Wait

five (5) minutes before starting the engine. i. Never store the machine of fuel container inside where there is an open flame, spark or pilot light as

on a water heater, space heater, furnace, clothes dryer or other gas appliances. j. Allow machine to cool at least five (5) minutes before storing.

LST30 30 Ton Log Splitter

IMPORTANT SAFE OPERATION PRACTICES

Operation

1. Before starting this machine, review the “Safety Instructions”. Failure to follow these rules may result in serious injury to the operator or bystanders.

2. Never leave this machine unattended with the engine running.

3. Do not operate machine while under the influence of alcohol, drugs, or medication.

4. Never allow anyone to operate this machine without proper instruction.

5. Always operate this machine with all safety equipment in place and working. Make sure all controls are properly adjusted for safe operation.

6. When loading a log, always place your hands on t he sides of the lo g, not on the ends, and nev er sue y our foot to help stabilize a log. Failure to do so, ma result in crushed or amputa ted fingers, toes, hand, or foot.

7. Use only your hand to operate the controls.

8. Never attempt to split more than one log at a time unless the ram has fully extended and a second log is needed to complete the separation of the first log.

9. For logs which are not cut square, the least square end and the longest portion of the log should be placed toward the beam and wedge, and the square end placed toward the end plate.

10. Always keep fingers away from any cracks that open in the log whi le spli tting. They can quickly close and pinch or amputate your fingers.

11. Keep your work area clean. Immediately remove split wood around the machine so you do not trip over it.

12. Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

13. This machine should not be towed on any street, highway or public road without checking the existing federal, state, or local vehicle requirements. Any licensing or modifications such as taillights, etc., needed to comply, is the sole responsibility of the purchaser. If a “Statement of Origin” is required in your state, see your local dealer.

14. Do not tow machine over 15 mph and do not move this machine while the engine is running.

15. See “Towing The Log Splitter” section in this manual for proper towing instructions once all federal, local, or state requirements are met.

Maintenance and Storage

1. Stop the engine, disconnect the spark plug and ground it against the engine before cleaning or inspecting.

2. Stop the en gine and relie ve hydraulic system pressure before repairing or adjusting fittings, hoses, tubing, or other system components.

3. To prevent fires, clean debris and chaff from the engine and muffler areas. If the engine is equipped with a spark arrester muffler, clean and inspect it regularly according to manufacturers’ instructions. Replace if damaged.

4. Periodically check that all nuts and bolts, hose clamps, and hydraulic fittings are tight to be sure equipment is in safe working condition.

5. Check all safety guards and shields to be sure they are in the proper position. Never operate with safety guards, shields, or other protective features removed.

6. The pressure relief valve is preset at the factory. Do not adjust the valve.

7. Never attempt to move this machine over hilly or uneven terrain without a tow vehicle or adequate help.

LST30 30 Ton Log Splitter

8. For your safety, replace all damaged or worn parts immediately with original equipment manufacturer’s

Symbol

(O.E.M.) p a rts only. “U se of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

9. Do not alter this machine in any manner, alterations such as attaching a rope or extension to the control handle, or adding to the width or height of the wedge many result in personal injury.

Safety Symbols

Read, understand, and follow all instructions & safety symbols before attempting to assemble and operate.

Description

READ THE OPERATOR’S MANUAL(S) Read, understand, and follow all instruction in the manual(s) before attempting to assemble and operate.

WARNING----CRUSHING HAZARD Keep hands away from wedge, end plate, partly split wood and moving parts

BYSTANDERS Keep bystanders, helpers and children at least 10 feet away.

SINGLE OPERATOR Only one person should operate the machine at a time. The adult who loads and holds log must be the one who operates control handle.

WARNING----PRESSURIZED FLUID Never check for hose leaks with your hands. High pressure fluid can escape through a pin hole leak and cause serious injury by puncturing the skin and causing blood poisoning.

EYE PROTECTION

LST30 30 Ton Log Splitter

Always wear safety glasses or safety goggles when operating this machine.

WARNING----MOVING WEDGE Keep hands away from wedge and moving parts.

IMPORTANT SAFETY INSTRUCTIONS

STOP!

Before using this log splitter, if you have any questions regarding the hazard and safety notices listed in this manual, call 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Central Time.

Carbon Monoxide Gas: When in operation, the exhaust from this log splitter contains poisonous carbon monoxide gas. Carbon

monoxide gas is both odorless and col or les s A ND may be pre sent even if you do not see or smell gas. Breathing this poison gas can lead to headaches, dizziness, drowsiness, loss of consciousness and eventually death.

• USE THIS LOG SPLITTER ONLY OUTDOORS IN NON-CONFINED AREAS. DO NOT SECURE THE LOG SPLITTER WITH A CHAIN OR

ROPE, AS THIS WILL MAKE IT DIFFICULT TO MOVE IN AN EMERGENCY.

• Keep at least several feet of clearance on all sides to allow proper ventilation.

Chemicals: According to the State of California, the exhaust from this log splitter contains chemicals known to cause cancer, birth

defects, or other reproductive harm.

LST30 30 Ton Log Splitter

Flammable Gasoline: This log splitter may emit highly flammable and explosive gasoline vapors, which can cause severe burns or

even death. A nearby open flame can lead to an explosion even if not directly in contact with gasoline.

• Do not operate this log splitter near open flame.

• Do not smoke near this log splitter.

• Always operate this log splitter on a firm, level surface.

Gasoline is highly flammable and explosive. Handling fuel can result in serious injury or burns.

• Always shut down this log splitter before refueling. Refuel in a well-ventilated area. Keep heat, sparks and flame away while refueling and away

from the location where gasoline is stored. Never refuel indoors where gasoline fumes may reach flames and/or sparks.

• Allow this log splitter to cool for at least 2 minutes before removing the fuel tank cap. Loosen the cap slowly to relieve pressure in the fuel t ank.

Avoid spilling fuel.

• Do not fill the fuel tank above the upper limit line. Gasoline may expand during operation. Do not fill to the top of the tank.

• Always check for spilled gasoline and immediately wipe it up before starting this log splitter.

• Empty the fuel tank before storing or transporting this log splitter.

• Always handle fuel outdoors.

• Before transporting, turn the fuel valve to the “OFF” position and disconnect the spark plug.

ASSEMBLY & SET-UP INSTRUCTIONS

WARNING! Use extreme caution unpacking this machine. Some components are very heavy and will require additional people or mechanical handling equipment.

NOTE: All references in this manual to the left or right side and front or back of the log splitter are from the operating position only. Exceptions, if any, will be specified.

UNPACKING THE CONTAINER

Step 1: Use a 14mm wrench to remove all the bolts and washers on the metal crate, put aside the packing top

and side frames, then remove the cardboard box.

Step 2: Remove all loose parts included in the container, including operator’s manual, wheels, hardware box and engine box.

Step 3: Use scissors or a knife to cut and remove the straps securing the parts to the beam or tank assembly, including fenders, tongue assembly, log tray & log dislodger assemblies, then put aside these parts for assembly.

NOTE: DO NOT remove the strap securing the hydraulic hoses assemblies to the beam at this time, until you do the assembly procedure of the hoses.

Step 4: Use a pry bar or claw hammer to remove the plywood splinters securing the beam and tank assemblies on the crate bottom. Take out the two assemblies.

Step 5: Inspect all component assemblies, parts and accessories according to the packing list.

LST30 30 Ton Log Splitter

Page 9

Unpacking tools needed:

1. Wrench 14mm

2. Scissors or knife

3. Pry bar or claw hammer

LST30 30 Ton Log Splitter

+ 23 hidden pages

Buffalo Tools LST30 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual