Buffalo Technology WLI-CB-B11 User Manual
Quick Setup Guide
Wireless Notebook Adapter-B
WLI-CB-B11
Use this guide to quickly and easily install your Wireless Notebook Adapter.
For detailed setup and confi guration information, refer to the AirStation
Wireless Notebook Adapter Help, located on the Air Navigator CD.
Contents
◗
Wireless Notebook Adapter-B
◗
Air Navigator CD
◗
Quick Setup Guide
◗
Warranty Card
If any items are missing, please contact the reseller from whom you
purchased this product.
System Requirements
◗
Notebook PC with an available 32-bit CardBus slot
◗
Windows 98SE, ME, 2000, XP, 2003
◗
10 MB of available disk space
◗
802.11b or 802.11g access point (Infrastructure Mode) OR a different
computer with an 802.11b or 802.11g wireless adapter (Ad-hoc Mode).
www.buffalotech.com/wireless
PY00-29014-DM20
Installing and Confi guring the Wireless Notebook
Adapter:
Windows 98/ME/2000/XP
Step 1 Installing the
Wireless Notebook Adapter-B Drivers
Caution: Do not insert the Wireless Notebook Adapter into the notebook prior to
completing the fi rst step..
◗ Insert the Air Navigator CD
into the CD-ROM drive of the
notebook. The Air Navigator
Setup Wizard launches automatically. If the Air Navigator
Setup Wizard does not launch
automatically, launch the
wizard manually by selecting
Start»Run to open the Run
dialog box. Enter D:\Setup.
exe in the Open fi eld, where D:
represents the letter assigned
to the CD-ROM drive. If another
letter is assigned to the CDROM drive, your command
should refl ect that difference.
Click the OK button to launch
the wizard.
◗ Select Install Wireless
Adapter. Click the OK button to
begin the installation process.
◗ Review the Software License
Agreement. Click the Yes button
to confi rm your agreement with
the terms and continue installing
the Wireless Notebook Adapter
drivers. Click the No button to
abort the installation process.
2
Windows XP Installation
& Confi guration
Step 2 Installing the Wireless Notebook Adapter-B
Insert the Wireless
◗
Notebook Adapter, with the
Buffalo logo facing up, into
an available CardBus slot.
CardBus slots are usually
located on the left or right
side of the notebook. Once
the Wireless Notebook
Adapter is installed
correctly, the Found New
Hardware Wizard will launch
automatically. If the Found
New Hardware Wizard does
not launch, remove the
Wireless Notebook Adapter
and restart the notebook. Reinsert the Wireless Notebook Adapter once the
notebook has rebooted into Windows.
◗ Select Install the software
automatically. Click the Next
button.
3
◗ Select the driver you want
to install. If multiple drivers
are listed, select the most
recent driver version. Click
the Next button.
◗ If a window opens, stating
that your driver does not
pass Windows Logo testing,
click the Continue Anyway
button. When the Wireless
Notebook Adapter is
successfully installed, click
the Finish button. Restart
your notebook if prompted.
4
Loading...