Buffalo Technology WLI2-PCI-G54 User Manual

Quick Setup Guide

Wireless 54Mbps Desktop

PCI Adapter-g
WLI2-PCI-G54

Use this guide to quickly and easily install your Wireless 54Mbps Desktop PCI

Adapter. For advanced setup and conguration information, refer to the AirStation
Wireless 54Mbps Desktop PCI Adapter Manual, located on the Air Navigator CD.

Contents

◗ Wireless 54Mbps Desktop PCI Adapter (WLI2-PCI-G54)
◗ Brass Buffalo Antenna Adapter
◗ Air Navigator CD
◗ Quick Setup Guides
◗ Warranty Card

If any items are missing, please contact the reseller from whom you purchased this
product.

System Requirements

◗ PC with an available PCI Slot.
◗ Windows 98SE, ME, 2000, XP, 2003
◗ 10 MB of available disk space
◗ 802.11b or 802.11g access point (Infrastructure Mode) OR a different computer

with an 802.11b or 802.11g wireless adapter (Ad-hoc Mode).

PY00-29023-DM20-01

1-01

Installing and Conguring the Wireless PCI Adapter:

Windows 98/ME/2000/XP

Step 1 Installing the Wireless PCI Adapter Drivers

Caution: Complete Step 1 before inserting the Wireless 54Mbps Desktop PCI

Adapter.

◗ Insert the Air Navigator CD into

the CD-ROM drive of the PC.
The Air Navigator Setup Wizard
launches automatically. If the Air
Navigator Setup Wizard does not
launch automatically, launch the
wizard manually by selecting
Start » Run to open the Run
dialog box. Enter D:\Setup.

exe in the Open eld, where D:
represents the letter assigned to the CD-ROM drive. If another letter is assigned
to the CD-ROM drive, your command should reect that difference. Click the OK
button to launch the wizard.

◗ Select Install Wireless

Adapter. Click the OK button to

begin the installation process.

◗ Review the Software License

Agreement. Click the Yes button
to conrm your agreement with
the terms and continue installing

the Wireless PCI Adapter drivers.
Click the No button to abort the

installation process. Also, close

the onscreen help that appears; it

is not necessary for this setup.

2

Windows XP Installation

& Conguration

Step 2 Installing the Wireless 54Mbps Desktop PCI Adapter

◗ Power off the desktop

PC. Firmly insert the Wire­less 54Mbps Desktop PCI
Adapter into an available

PCI slot. PCI slots are
located inside the desktop

computer. Please consult
the PC Manufacturer's docu­mentation for PCI installa­tion instructions. Once the

Wireless 54Mbps Desktop
PCI Adapter is installed

correctly, attach the included

black antenna on the back

of the PCI card, start the
PC and let it boot into Windows. Then, the Found New Hardware Wizard will
launch automatically. If the Found New Hardware Wizard does not launch, turn
off the computer, remove the Wireless 54Mbps Desktop PCI Adapter, reinsert it
into another PCI slot, and restart the computer.

◗ Select Install the software

automatically. Click the Next

button.

3

◗ Select the driver you

want to install. If multiple
drivers are listed, select the
most recent driver version.

Click the Next button.

◗ If a window opens,

stating that your driver has

not passed Windows Logo
testing, click the Continue

Anyway button. When
the Wireless PCI Adapter

is successfully installed,

click the Finish button
and restart your PC if

prompted.

4