Buffalo Technology WHR-G54S-QSG User Manual

www.buffalotech.com

Quick Setup Guide - AirStation WHR-G54S

Wireless Cable/DSL Smart Router

v2.5

Package Contents

• WHR-G54S AirStation

• Antenna

• Base

• AC adapter and power cable

• CAT5 LAN cable

• Utility CD with Manual

• Quick Setup Guides

• Warranty Statement

2

A. Screw the antenna into the top of your AirStation. It

will usually work best if confi gured to point straight up.
Attach the stand if desired.

B. Make sure that all equipment is powered off,

including the AirStation, PCs, and your cable or DSL
modem.

C. Connect the RJ-45 Ethernet cable from your cable or

DSL modem to the WAN port on your AirStation. This is
the only port that will work for your internet connection.

D. Connect one or more PCs or workstations to any of

the four LAN ports on the AirStation with RJ-45 Ethernet
cables.

E. Power on the cable or DSL modem. Give it at least a

minute to boot up.

F. Connect the AC power connector to the power port

on the AirStation and to an AC surge protector or other
source of AC power. Give the AirStation a minute to boot.

G. Power on the PC(s) connected to the LAN ports of the

AirStation and let them boot up completely.

Step 1: Connect Your Equipment

Ethernet cable to PC

Ethernet cable to

Cable/DSL Modem

AC Power