Buffalo Technology TeraStation Pro User Manual

Package Contents:

Quick Setup Guide

TeraStation Pro

Main Unit (TeraStation)
Ethernet Cable
Power Cable
TeraNavigator Installation CD
Quick Setup Guide (this manual)

Warranty Card

www.buffalotech.com

v1.2

Step 1: Connect your Cables

Plug TeraStation’s power cord and Ethernet cable into the back of
the TeraStation.

Connect the power plug to a power outlet. Plug the other end of
the Ethernet cable into a hub, switch, or router on the network.

Press the power button on the front panel to turn your
TeraStation on.

2

Step 2: Check your Connection

Check the LINK/ACT LED on the front of the TeraStation. If it’s
lit, then your TeraStation is connected to your network. Please

to continue setup.

turn to

If the LINK/ACT LED on the front of TeraStation is
TeraStation is not properly connected to your network. Make sure
that:

• both TeraStation and the hub, switch, or PC are powered on,

• the Ethernet cable is securely fastened to both devices, and

• the Ethernet cable is not damaged. To verify, try using another

page 4

Ethernet cable.

lit, your

not

If problems persist, contact our technical support. Refer to page
9 for more details.

3