Buffalo DM067-A Instruction Manual

Model DM067-A

Ice Cream Maker

Instruction manual

Safety Tips

A service agent/qualified technician should carry out installation and any repairs if required.

Do not remove any components or service panels on this product

Consult Local and National standards to comply with the following:

o Health and safety at work legislation
o BS EN Codes of practice
o Fire Precautions
o IEE wiring regulations
o Building regulations

DO NOT use jet/pressure washers to clean the appliance
DO NOT immerse the appliance in water
DO NOT use the appliance outside
DO NOT attempt to mix items that this machine is not designed for. This can damage the

machine.

DO NOT bypass the safety interlocks
DO NOT place hands near the rotating attachments when in use. This can result in injury.
Never leave the appliance unattended when in use
Always switch off and disconnect the power supply to the unit before cleaning
This appliance must only be used in accordance with these instructions and by persons

competent to do so.

Keep all packaging away from children. Dispose of the packaging in accordance with the

regulations of local authorities

If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended

qualified technician in order to avoid a hazard

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience or knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible
for their safety

Children should be supervised to ensure that they do not play with the appliance
Intended for Household use only

Product Description

DM067-A – BUFFALO Ice Cream Maker

Pack Contents

BUFFALO Ice Cream Maker Scoop
Measuring Cup Instruction manual

BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage. Should you find any damage as a result of transit,
please contact your BUFFALO dealer immediately.

GETTING TO KNOW YOUR ICE CREAM MAKER

BEFORE FIRST USE

Before use, thoroughly wash all parts that will come into contact with the ice cream (including the
removable bowl, blender blade, transparent lid, refill lid, measuring cup and scoop)

USING YOUR ICE CREAM MAKER

Place the removable bowl, with ingredients, into the machine

For fastest results ingredients should be pre-chilled

Fix blender blade to machine insuring that the blade

connects well with the motor axis (see below)

Fit the transparent lid onto the machine and lock

into place

Turn the timer to the desired time setting. The

blender blade will start to turn. After a short delay
the compressor will start and the bowl will start to
chill. The LED display shows the temperature

When the machine is running you can

increase/decrease the operating time by turning
the timer.

You can stop the machine at any time by turning

the timer anticlockwise to the 0 position.

When produce becomes frozen blade will stop turning. Switch off the machine immediately to
protect blade motor

To avoid overflow and waste please make sure that the ingredients do not exceed 60% of the
capacity of the removable bowl (ice cream expands when being formed)

CLEANING AND MAINTENANCE

1. Unplug the appliance and wait for it to completely cool down before cleaning.

2. Wipe over the outside surface of the unit with a dampened cloth and polish with a soft dry cloth.

3. Wipe any excess food from the power cord.

4. Wash the removable bowl and accessories in warm soapy water and wipe dry.

Trouble Shooting

Fault

Probable Cause

Action

The unit is not working

The Unit is not switched on

Check the unit is plugged in
correctly and switched on

Plug and lead are damaged

Call BUFFALO agent or qualified
technician

Fuse in the plug has blown

Replace the plug fuse

Power supply

Check Power Supply

Internal wiring fault

Call BUFFALO agent or qualified
technician

The ice cream is too soft

Timer setting too short

Increase timer setting

The Ice Cream is too hard

Timer setting too long

Reduce timer setting

The timer has not reached 0
but the machine has stopped
and the ice cream is hard

The ice cream has frozen solid
stopping the blade from
turning. The motor protection
system has engaged to stop the
motor overheating

Allow the unit to cool before
attempting to restart.

The blade is not turning

Blade not fitted to motor axis
correctly

Ensure the removable bowl is
fitted correctly and that the
blade has a good connection to
the motor axis

Technical Specification

Model

Voltage

Power

Current

Capacity

(Litres)

Dimensions

h x w x d mm

Weight

(kg)

DM067-A

230V
50hz

150w

0.7A

1.5

245 x402 x 348

12.2

Electrical Wiring

The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:

• Live wire (coloured brown) to terminal marked L

• Neutral wire (coloured blue) to terminal marked N

• Earth wire (coloured green/yellow) to terminal marked E

This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human health
and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible
for waste disposal in your area.

BUFFALO parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent, and federal
authorities.

BUFFALO products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by

any means, electronic, mechanical, photocopying, recording or otherwise, without the prior

written permission of BUFFALO.

Every effort is made to ensure all details are correct at the time of going to press, however,

BUFFALO reserve the right to change specifications without notice.

Ice Cream Recipe

To avoid overflow and waste, please make sure that the ingredients do not exceed 80% of the
capacity of the removable bowl (Ice Cream expands when freezing)

Vanilla Ice Cream

Makes approx 10 120ml servings

Ingredients

240ml of Whole Milk

150g of Granulated Sugar

480ml of Double Cream

½ teaspoon pure vanilla extract (to taste)

In a bowl, use a hand mixer or a whisk to combine the milk and sugar until the sugar is dissolved.
Stir in the cream and vanilla to taste. Turn machine on, pour mix into freezer bowl and mix until
thickened.

DECLARATION OF CONFORMITY

Equipment Type

Ice Cream Maker

Model

DM067-A

Legislation

C-Tick
AS/NZ 3820 Essential Safety Requirements for Low Voltage Electrical
Equipment

Standards

AS/NZS CISPR 14.1:2010
AS/NZS 60335.1:2002
IEC 60335-2-24:2003

Producer Name

Buffalo

Producer Address

Unit 2, 34-38 Anzac Ave,
Smeaton Grange,
NSW 2567

I, the undersigned, hereby declare that the equipment specified above conforms to the above Legislation and
Standard(s).

Date

22/11/12

Signature
Full Name

Richard Cromwell

Position

Commercial Director

DM067-A_v2