Buffalo APBG108 Instruction Manual

Coffee Machine

Instruction manual

Model

APBG108

1

Safety Tips

• Position on a flat, stable surface.

• A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components on this product.

• Consult Local and National Standards to comply with the following:

• Health and Safety at Work Legislation

• BS EN Codes of Practice

• Fire Precautions

• IEE Wiring Regulations

• Building Regulations

• DO NOT immerse the appliance in water.

• DO NOT touch hot surfaces.

• DO NOT leave the appliance unattended during operation.

• DO NOT remove the filter basket during the filtration process.

• Suitable for indoor use only.

• Always switch off and disconnect the power supply to the appliance when not in use.

• This appliance must only be used in accordance with these instructions and by persons competent to
do so.

• This appliance is not suitable for use by children.

• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of
local authorities.

• If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified
technician in order to avoid a hazard.

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.

Pack Contents

The following is included:

• BUFFALO Coffee Machine

• Filter basket

•Jug

• Instruction manual

BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.

Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.

2

*

Operation

Location of Controls

Before Using for the First Time

BUFFALO recommend that the appliance is cleaned out before using for the first time, or if the appliance
has been sat unused for an extended period of time.

1. Fill the water reservoir with cold water.

2. Slide the empty filter basket into position between the two basket tabs.

3. Place the jug on the base hotplate beneath the basket.

4. Turn the Brewing power switch On . The Brewing Indicator lights up and hot water will begin to fill

the jug.

5. Once finished the Brewing Indicator light will switch off. Discard the hot water in the jug.

6. Repeat steps 1-5. The appliance is now clean.

Note: Use the Jar to fill the reservoir to ensure the maximum capacity of the jar is not
exceeded. The maximum amount of water the reservoir can contain is 2.2 litres.

Note: During operation, steam may rise from the appliance and loud bubbling noises
may be heard. This is perfectly normal.

WARNING: The glass jug becomes hot during operation. Always pick up the jug by the
handle to avoid injury.

Upper hotplate

Basket tabs

Brewing power

switch

Upper hotplate

power switch

Jug

Water reservoir

Brewing Indicator
light

Filter basket

Base hotplate