Buffalo 2.4GHz Indoor Omni Antenna WLE-NDR, WLE-NDR, AirStation WLE-NDR Quick Setup Manual

1

¤

Quick Setup Guide

2.4GHz Indoor Omni Antenna

WLE-NDR

Use this guide to quickly and easily install your AirStation 2.4GHz Indoor Omni
Antenna.

The AirStation 2.4GHz Indoor Omni Antenna can be used with all
Buffalo AirStation 2.4GHz 11Mbps, 802.11b and 54Mbps, 802.11g Access
Points (Base Stations) to boost performance and improve the signal range
by 20%. The 2.4GHz antennas can also be used with select AirStation

Client Cards with the MC connector.

Contents

◗ 2.4GHz Indoor Omni Antenna

- WLE-NDR

◗ 2 Screws for Mounting
◗ Quick Setup Guide
◗ Warranty Card

If any items are missing, please contact the reseller from whom you purchased
this product.

System Requirements

◗Any Buffalo AirStation wireless product with an MC connector

PY00-26117-DM10-01

WLE-NDR

Installing a 2.4GHz Indoor
Omni Antenna on an AirStation

 Locate the antenna connetor

sliding door on the rear of the
AirStation.

2

 Slide the door down on the

rear of the AirStation to reveal
the external antenna connector.